Essex · Ductwork cleaning
Duct cleaning in Mayland
Ductwork cleaning in Mayland from ventilation hygiene specialists trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Heavy grease at the base of a riser
- Thick crusts of old grease along the duct
- Grease leaking from duct joints
Ductwork cleaning for kitchens and businesses in Mayland
Once air leaves the canopy, it travels through ductwork that most people never see. Every horizontal run and vertical riser collects grease along the way and a fire in the duct can spread through the building. Our ductwork cleaning reaches inside the runs and risers through access panels, to BESA TR19® Grease. If you have grease seeping out of the duct seams and a duct nobody has opened in years, we can help.
Work in a small place like Mayland starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we are fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Where
- Mayland (CM3)
- Region
- Essex
- Reporting
- Certificate and photo report
- Quotes
- A fixed price before we start
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
What a clean won’t put right
Not every problem is solved by ductwork cleaning, and we’ll tell you before work begins. It won’t put right:
- Duct sections that need replacing
- Parts of the duct with no way in
- Faulty fire dampers
If in doubt, ring 0345 646 2711 or use the quote form and we’ll say what we think before you book.
Parts of the system we cover
- Multi-storey ducts
- Bends and junctions
- Access panels
- Attenuators
- Vertical risers
- Horizontal duct runs
What we’re called out for in Mayland
Ducts in Mayland gather grease for the same reasons as ducts anywhere: hours of cooking, the type of food and how well the filters are kept. Under BESA guidance, the minimum interval is 3, 6 or 12 months, by daily cooking hours.
Common reasons sites call us include:
- Years of grease along the duct floor
- A rancid smell from the extract duct
- Grease leaking from duct joints
- An insurer asking for TR19 evidence
Whether the kitchen is in Mayland itself or nearby, a TR19® clean covers the whole system, canopy to discharge.
What to look for in a quote
- What paperwork you get at the end
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- If the quote is a fixed price or an estimate
- Whether the quote is based on a survey or photos
Ductwork cleaning around Mayland
Mayland is within about 1 mile of the coast. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. There are about 7 cafés, restaurants and staff canteens in Mayland and the streets around it, up to about 1.5 miles out, according to the Food Standards Agency’s register. Behind every canopy among them is a run of ductwork that collects grease out of sight. Food hygiene inspections in Mayland are the job of Maldon council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
If you look after a school kitchen, at a school such as Maylandsea Primary School or anywhere near Mayland, the holidays are the usual time for a TR19® clean.
Mayland is about 5 miles south-east of Maldon, in Essex. Sites in Mayland get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where needed and a written report with pictures. Across Essex, we cover 644 places, and Mayland is one of them. You can also see our page for Chelmsford, roughly 12 miles from Mayland.
We work across CM3 for ductwork cleaning and the streets around it. We cover sites on Thrumble Close, Fels Way and Teal Avenue and nearby roads. Nearby, we also carry out ductwork cleaning in Maylandsea (1 mile north-west), Latchingdon (2 miles south-west), Althorne (2 miles south), Mundon (3 miles west) and Ostend (3 miles south-east). We also work in nearby towns such as Colchester (15 miles north), Chelmsford (12 miles west), Basildon (15 miles south-west), Maldon (5 miles north-west), Canvey Island (13 miles south-west) and Billericay (15 miles west).
Around Mayland
Locally, jobs take us to businesses close to The Mayland Mill Public House and the streets around them. Mayland’s nearest station is Althorne station, roughly 2.5 miles south of the centre. Open spaces near Mayland include Northey Island.
Why it’s worth doing now in Mayland
TR19® is not law, but the duty to manage fire risk is. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and grease in the duct is part of that. A planned visit to Mayland is easier to arrange than an emergency callout.
What you pay reflects the actual work. That’s why every job is surveyed first, and why the quote is fixed before any work starts.
Why Mayland businesses choose us
- Full insurance on every job
- Fixed quotes, normally within one working day
- Survey first, then a fixed quote
- CHAS, SafeContractor and ISO 9001
What affects the quote in Mayland
The survey tells us what the work involves. We look at:
- The scale of the work
- Whether it’s a one-off visit or part of a schedule
- How easy every part is to reach
- Site requirements such as sign-in and permits
When the work has to happen, how we reach it and how big the site is all affect the cost. We take each of them into account, and the price is fixed before any work starts.
Helping us quote
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- Photos showing the whole system and its surroundings
- Your opening hours and when the area is out of use
- Close-ups of filters, grilles, hatches or access panels
- How we’d reach plant on a roof or in a plant room
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
How the job changes from site to site
Horizontal duct runs
A long flat run can’t be cleaned from one end. Any stretch out of reach is noted and can fit extra panels.
Access panels
Extra panels can be installed where there are gaps, making future cleans more complete. We’ll recommend where they should go.
Places near Mayland
What else we do in Mayland
How the visit works
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. From there, it takes a shift or more, depending on the length of the runs and the number of access points. If you can send photos, we can arrive in Mayland knowing what to expect.
- Diagnosis: a survey of the duct’s route, size and access.
- A fixed quote follows, based on what we found.
- We clean section by section, working from panel to panel.
- We take extra care at bends and at the foot of risers.
- The duct is signed off with readings, photos and a next clean date.
How to prepare
- Make sure equipment near the work can be switched off and left to cool
- Have your last certificate or report to hand
- Tell us where we can park and unload
Getting a quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in pictures, get a survey first. Either way, the quote is fixed before any work is booked.
Advice
Your questions about ductwork cleaning in Mayland
Can sea air affect ductwork cleaning in Mayland?
Yes, to a degree: at about 1 mile from the coast, Mayland gets salt-laden air that corrodes metal faster. Corroded fixings and housings are noted on the report so they can be dealt with.
Do you work in villages like Mayland?
Yes. Villages and rural sites across the South East are part of our work, Mayland included. A survey first, from photos or a visit, means we arrive with the right kit.
Which kinds of sites do you work on?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
How often does extract ductwork need cleaning?
It depends mostly on daily cooking hours. Kitchens cooking 12 to 16 hours a day need it at least every 3 months, while lighter use can go longer.
What does TR19 mean?
TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Do you work with multi-site operators?
Yes. Tell us the addresses and what each needs and we will quote them together.
What should I send you?
A short description and a few photos, with the address and opening hours. We will ask for anything else we need.
Can we book visits on a schedule?
Yes, of course. Send details of the systems and how they’re used and we will propose a schedule with a fixed quote.
Keeping the system healthy
Simple habits between visits make a real difference. We recommend:
- Report any grease dripping from duct joints
- Check readings when the menu changes
- File each certificate and photo report in the maintenance log
- Ask us about extra access panels where sections cannot be reached
Every panel we open is refitted when we finish, and the surrounding area is left clean. Grease and dirty water are contained and removed.
Some signs mean the duct needs attention sooner: grease leaking from duct joints, smells, or a fan that sounds rough. Testing will show whether any section has reached 500 microns.