Essex · Ductwork cleaning
Ductwork Cleaning in Matching Tye
Looking for ductwork cleaning in Matching Tye? We diagnose first, fix the price and book the work around your hours, finishing with a written report and photos.
- Duct runs that cannot be reached
- Proof of duct cleaning for the insurer
- Stale grease odours from the duct
How we handle ductwork cleaning in Matching Tye
Once air leaves the canopy, it travels through ductwork that most people never see. Grease settles along every metre of it, and that’s where a kitchen fire can travel. We clean it from the inside, through access panels, to BESA TR19® Grease. If you’re dealing with stale grease odours from the duct and gaps where access panels were never fitted, we can help.
In a village or hamlet like Matching Tye, the kitchens that need extract cleaning are usually a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
The paperwork matters as much as the work. You get a written report with pictures after each visit, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Where
- Matching Tye (CM17)
- Wider area
- Essex
- Reporting
- Certificate and photo report
- Price
- A fixed price before we start
- When we work
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
What ductwork cleaning looks like in Matching Tye
The FSA’s data shows about 3 pubs and bars registered within about 1.5 miles of central Matching Tye. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. It’s Epping Forest council that sends environmental health officers to food businesses in Matching Tye. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Before-and-after pictures from each clean are a simple way to show the extract is in hand. Matching Tye sits within the area of Essex County Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
If your kitchen is in a listed or historic building, like the houses around Matching Tye (Barrington Hall is about 4.5 miles north-east), fitting access panels needs care. If you run a church or community hall kitchen, near Parish Church of St Mary or elsewhere in Matching Tye, its extract still collects grease from every lunch and event.
Matching Tye is about 3 miles east of Harlow, in Essex. Whatever kind of site you run in Matching Tye, ductwork cleaning is something we can help with. Visits can be booked for evenings, overnight or weekends so the site keeps running. 644 places in Essex are on our list, large and small. Our Chelmsford page covers sites nearby, about 13 miles away.
Work in CM17 follows the same survey, fixed quote and written report as everywhere else we cover. Local streets include Rainbow Road and Harlow Road, and we cover them all for ductwork cleaning. Other places close to Matching Tye include Matching (1 mile north-east), Housham Tye (1 mile west), Loyter's Green (1 mile south), Newman's End (1 mile north) and Magdalen Laver (2 miles south). Further out, we also cover Chelmsford (13 miles east), Harlow (3 miles west), Brentwood (12 miles south-east), Billericay (14 miles south-east), Loughton (11 miles south-west) and Waltham Abbey (10 miles south-west).
Around Matching Tye
In Matching Tye, that means kitchens and buildings near Gibberd Garden and the streets around them. The nearest railway station is Harlow Mill station, about 2.7 miles west of the centre. Other landmarks nearby include Harlow Mill (2.9 miles west) and Mark Hall Cycle Museum (2.9 miles west). Not far away are Sawbridgeworth Marsh.
Places near Matching Tye
Also in Matching Tye
How the visit works
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes from a few hours to more than one visit, depending on duct length and access. We agree a date with you, plan the drive to Matching Tye and turn up when the site is quiet.
- First we diagnose: the route, the access and the grease levels.
- You get a fixed price before work starts.
- We clean section by section, working from panel to panel.
- We take extra care at bends and at the foot of risers.
- The duct is signed off with readings, pictures and a next clean date.
Before we arrive
- Let us know how we reach the system, including roofs, risers and plant rooms
- Clear the space around the work
- Make sure equipment near the work can be switched off and left to cool
How to get a quote
For a fixed quote, call us on 0345 646 2711 or drop us a line with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. We normally come back within one working day.
Related advice
Leave it or put it right?
A dirty duct is something insurers ask about. Many policies require TR19 cleaning, and a claim may be refused or reduced without evidence. Your certificate and photo report show the ducts were cleaned. Planning a trip to Matching Tye ahead is easier for everyone than a rushed one.
Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you are unsure, call us on 0345 646 2711 or email us for straight advice and a fixed quote.
Why book with us
- In business since 2009
- One contact for all your sites in London and the South East
- Fixed quotes from a survey or photos
- Fully insured
Take a look at our cost guide and our accreditations.
FAQs for Matching Tye
Which environmental health team covers Matching Tye?
Kitchens in Matching Tye are inspected by Epping Forest council’s environmental health officers. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Do you work in villages like Matching Tye?
Yes, we work in villages as well as towns, and Matching Tye is covered. Let us know about access, parking and anything unusual about getting there when you book.
Do you survey before quoting?
Yes, every time. Diagnosis comes before treatment: the survey shows what needs doing and what access we need and the fixed quote is built on it.
What shows that the ducts need a clean?
A grease thickness test gives the answer. Using a Wet Film Thickness Test or Deposit Thickness Test, we check the grease at set points. BESA guidance says the mean shouldn’t exceed 200 microns, and 500 or more anywhere needs immediate spot cleaning.
Can one contract cover all our sites?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together on one programme. Each site gets its own report and pictures.
Are you fully insured?
Yes, fully. CHAS and SafeContractor accreditation sit alongside it, for sites that check contractor safety.
How often does extract ductwork need cleaning?
At least as often as BESA guidance sets for your cooking hours. Kitchens cooking 12 to 16 hours a day need it at least every 3 months, while lighter use can go longer.
How long does ductwork cleaning take?
It depends on the length of the duct, the number of access panels and how much grease there is. As a guide, it takes a few hours for a short run, longer for long runs and tall risers.
Looking after it afterwards
So the system stays in good health:
- Leave a way through to the access panels
- Store the certificate with the fire risk assessment
- Report any grease dripping from duct joints
- Do not switch the extract off early
The report names every part of the duct that couldn’t be reached and why. We can fit access panels so those sections are cleaned next time.
Run the extract the whole time the kitchen is cooking. When the air stops, grease settles in the duct, so switching off early adds to the build-up.
Part by part
Vertical risers
A riser takes the duct up through one or more floors. Grease collects on the walls and at the foot of the riser, so the base is one of our test points.
Attenuators and discharge
Near the discharge, the air has cooled the most, which can mean heavier deposits. We include it in the clean and the readings.
When to call us in Matching Tye
Damaged or poorly fitted filters let more grease into the duct. More grease reaches the ductwork than it should and it fills faster.
Look out for any of the following:
- Fat dripping from the ductwork
- An insurer asking for TR19 evidence
- A grease test showing the duct is overdue
- Thick deposits at the bottom of a vertical duct
Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Matching Tye is Princess Alexandra Hospital, about 4.6 miles west.
What to look for in a quote
- When they can work, and whether that’s outside your opening hours
- If they look at the system before pricing
- Exactly which parts of the system are covered
- Whether inaccessible sections are listed on the report
Honest limits
Some problems need a different service or another trade:
- Ductwork that was poorly designed
- Fire dampers that do not close (they need testing and remedials)
- Duct sections that need replacing
Not sure which it is? You can call us on 0345 646 2711 or drop us a line and we will tell you honestly before you book.
What the work covers
- Multi-storey ducts
- Bends and junctions
- Horizontal duct runs
- Vertical risers
- Attenuators
- Access panels
What affects the quote in Matching Tye
You will get a fixed price before we start. It takes into account:
- Site requirements such as sign-in and permits
- Parking and loading at the site
- The times the site is available
- How easy every part is to reach
Every site is different, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all play a part.
Helping us quote
A few details help us quote accurately. When you get in touch, it helps to send:
- Wide pictures of the system and the area around it
- The times we could work without disrupting the site
- The postcode and the type of business
- Detail shots of panels, filters and grilles
Getting a quote does not take long. Call or email with a few details and you will usually have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.