Kent · Ductwork cleaning
Duct cleaning in Kent Street
Ductwork cleaning for commercial sites in Kent Street and across Kent. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- Heavy grease at the base of a riser
- Duct runs that cannot be reached
- A rancid smell from the extract duct
Ductwork cleaning in Kent Street
Each extract duct we take on in Kent Street goes through the full routine: we test the grease first, remove thick deposits by hand and degrease what’s left. Post-clean readings and photos complete the record. The work covers multi-storey ducts, bends and junctions and horizontal duct runs, and the jobs we see most are a grease test showing the duct is overdue and stale grease odours from the duct.
Work in a small place like Kent Street starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
Duct Doctor has been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Where
- Kent Street (ME18)
- Wider area
- Kent
- Records
- Certificate plus before-and-after photos
- Quote
- A fixed price before any work starts
- Working hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Leave it or put it right?
Booking the duct clean in Kent Street now keeps it a planned job. The work takes from a few hours to more than one visit, depending on duct length and access, and we work evenings, overnight and weekends. Planning a trip to Kent Street ahead is easier for everyone than a rushed one.
Several systems or sites on one quote can make for a more efficient booking. Tell us about everything you’d like looked at and we will price it together.
Why book with us
- Survey first, then a fixed quote
- Fully insured
- CHAS and SafeContractor accredited, with ISO 9001
- A fixed price before any work starts
Read our cost guide or how to check a contractor.
How it works
There’s very little for your team to do on the day. Someone lets us in at the agreed time and shows us where everything is, and we take it from there. Before we leave, the area is tidied and the paperwork follows. If you can send photos, we can arrive in Kent Street knowing what to expect.
- The duct route is surveyed and every access point found.
- We take grease readings along the route.
- Out of hours, the area is protected and the access panels opened.
- Thick grease is scraped out, then the runs and risers are degreased.
- Panels are closed, readings and photos repeated, and unreachable sections recorded.
Preparing for the visit
- Let us know about parking and loading
- Mention any sign-in, permit or induction we need
- Allow time for equipment near the work to be turned off and cool down
Getting a quote
Getting a quote doesn’t take long. Send a few details and pictures, and we typically reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Advice
Multi-site and managed buildings
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
From a single site to a large estate, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with pictures.
FAQs for Kent Street
Do you do school kitchen extract cleaning in Kent Street in the summer holidays?
Yes. Half-terms and the summer break are the natural time for school work. With about 5 schools and colleges on the FSA’s register within roughly a mile and a half of Kent Street, it pays to plan holiday dates ahead. You can give us a ring on 0345 646 2711, or send details by email with the dates the site is empty.
Which fire and rescue service is responsible for Kent Street?
It’s Kent Fire and Rescue Service, which covers Kent Street. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Are you insured?
Yes. We carry full insurance, and we’ve been trading since 2009.
Do you survey before quoting?
Yes. We always survey first, either from photos and details you send or on a site visit. Then you get a fixed quote.
How much notice should we give?
For planned work, earlier is better, especially if the next clean or test is due soon. For emergencies, we take calls 24/7.
Do I get a certificate for ductwork cleaning?
A full system clean comes with a TR19 certificate and a photo report. The report shows readings, pictures and any sections we couldn’t reach.
Is a quote from photos possible?
Typically, yes. Send wide shots, close-ups of any access panels and anything that worries you, and a fixed quote normally follows within one working day. If pictures are not enough, we’ll survey first.
How is kitchen extract ductwork cleaned?
We get into the duct through its access panels. Heavy grease is scraped out by hand, then the surfaces are degreased with a method that suits the deposit, such as degreasers, hot water or steam.
Fixed quotes for ductwork cleaning in Kent Street
We don’t publish a price list, because sites vary so much. The quote depends on:
- Whether we need access equipment or extra panels
- The times the site is available
- The scale of the work
- Whether several sites go on one quote
The price reflects the work, not guesswork. That’s why we survey first, from pictures or on site, and the price is agreed before we start.
What we need to know
When you contact us, it’s useful to have:
- Your opening hours and when the area is out of use
- The site address and the type of premises
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Problems your staff have spotted
Need a price for ductwork cleaning? Please give us a ring on 0345 646 2711 or use the quote form and tell us about the site. We will talk you through the work and give you a fixed quote before you commit to anything.
Places near Kent Street
Also in Kent Street
What ductwork cleaning looks like in Kent Street
The Food Standards Agency lists about 3 pubs and bars as registered food businesses within about 1.5 miles of central Kent Street. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. Food hygiene inspections in Kent Street are the job of Tonbridge and Malling council’s environmental health team. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A TR19® certificate and photo report after each clean gives you a record to show an inspector. Kent Fire and Rescue Service covers Kent Street. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Old Soar Manor is about 2.8 miles west), access may need planning. For schools such as Kings Hill School, kitchen extract cleaning is typically booked for the holidays, when the canteen is closed. A hall kitchen that only cooks for events, whether near St Lawrence's Church or elsewhere in Kent Street, still needs its extract cleaned, just less often.
Kent Street is about 6 miles west of Maidstone, in Kent. From the centre of Kent Street to the outskirts, ductwork cleaning is available to all kinds of commercial premises, from a single unit to a large public building. We cover 922 places across Kent, from busy centres to quieter spots. There’s also a page for Maidstone, about 6 miles away.
All of ME18 is covered for ductwork cleaning, from the main roads to the quietest streets. Streets in the area include Kent Street and Malling Road, and we cover them all for ductwork cleaning. Neighbouring places we cover for ductwork cleaning include Herne Pound (1 mile south-west), Mereworth (1 mile south), New Pound (1 mile west), Pizien Well (1 mile south-east) and Swanton (1 mile south-west). We also work in nearby towns such as Maidstone (6 miles east), Dartford (14 miles north-west), Sevenoaks (9 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (11 miles north) and Tonbridge (7 miles south-west).
Around Kent Street
In Kent Street, that means kitchens and buildings near The Queens Head Public House and Manor Park Country Park. Kent Street’s nearest station is Wateringbury station, about 2.1 miles south-east. Nearby you will also find Beechin Wood Archery Museum (2.5 miles north-west) and Maidstone Hospital (4.3 miles east).
Part by part
Bends and transitions
The join where the canopy meets the duct is a common hotspot. We reach it from the plenum side where possible.
Vertical risers
A riser takes the duct up through one or more floors. Grease collects on the walls and at the foot of the riser, which is one of the points we test.
In-house cleaning or a specialist?
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Honest limits
A few issues sit outside what this work can do:
- Parts of the duct with no way in
- Leaking duct joints that need repair
- Undersized or badly laid-out ducts
If you are not sure, just phone us on 0345 646 2711 or email us and we’ll give you a straight answer.
Where we work
- Access panels
- Vertical risers
- Attenuators
- Horizontal duct runs
- Multi-storey ducts
- Bends and junctions