West Sussex · Ductwork cleaning

Ductwork cleaning in High Cross, West Sussex

Our technicians work in High Cross on cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels. Fixed quotes, work around your opening hours and photo reports on every job.

  • Grease pooling at the foot of the riser
  • Duct runs with no cleaning record
  • Sections of duct with no access panels

Book ductwork cleaning in High Cross

Different parts, different methods

Access panels

We can fit new access panels where the duct needs them, making future cleans more complete. The survey shows where they’re needed.

Multi-storey and shared buildings

In a shared building, the duct links the kitchen to other spaces, so the responsible person has more reason to keep it clean. The paperwork suits landlords and managing agents.

Ductwork cleaning in High Cross, done properly

Once air leaves the canopy, it travels through ductwork that most people never see. Grease settles along every metre of it, and that’s where a kitchen fire can travel. We clean it from the inside, through access panels, to BESA TR19® Grease. We are often asked to deal with years of grease along the duct floor and ductwork that has never been cleaned, on horizontal duct runs, attenuators and multi-storey ducts.

In a small place like High Cross, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.

Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.

Where
High Cross (BN6)
Region
West Sussex
Records
TR19® certificate and photo report
Quotes
Fixed quote, normally within a working day
Working hours
Nights, weekends or holidays to suit you
Phone
0345 646 2711
Last updated
30 October 2026
Extract duct interior shown dirty and then cleaned back to bare metal

Do you need ductwork cleaning in High Cross?

Grease settles fastest where the air slows down. Flat runs, bends, reducers and the base of risers are the usual hotspots, and those are the points we pay most attention to.

Look out for any of the following:

  • Years of grease along the duct floor
  • A rancid smell from the extract duct
  • Thick deposits at the bottom of a vertical duct
  • A duct nobody has opened in years

Term dates shape school work: for a school like Albourne CofE Primary School, an extract clean fits neatly into a half-term or summer break.

Comparing quotes

  • Whether a survey comes first
  • What paperwork you get at the end
  • Proof of accreditation you can verify
  • Whether VAT is included

Our hiring checklist

Ductwork cleaning around High Cross

Fire safety in High Cross falls to West Sussex Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. High Cross, about 39 miles from central London, is within our usual area. A survey and a fixed quote come first, then the visit at a time that suits you.

Volunteers running a hall kitchen near The Parish Church of St Bartholomew, or anywhere in High Cross, may not know when the extract was last cleaned, and a grease test settles it. A hospital like The Dene Hospital, about 2.9 miles north-east, is the kind of site where a kitchen may cook for patients, staff and visitors all day.

High Cross is about 4 miles west of Burgess Hill, in West Sussex. If you need ductwork cleaning in High Cross, it’s easy to get a fixed quote: please give us a ring on 0345 646 2711 or send us an email. We work across South East England and London, High Cross included. High Cross is one of 371 places in West Sussex we cover for commercial clients. Our Brighton page covers sites nearby (9 miles or so).

Every address in BN6 is within our area for ductwork cleaning, from busy streets to back roads. We also cover the places around High Cross: Albourne (1 mile south-east), Albourne Green (1 mile south-east), Albourne Street (1 mile south-east), Blackstone (1 mile south-west) and Twineham (2 miles north). Further out, we also cover Crawley (12 miles north), Horsham (10 miles north-west), Worthing (11 miles south-west), Haywards Heath (7 miles north-east), Burgess Hill (4 miles east) and Shoreham-by-Sea (8 miles south).

Around High Cross

High Cross’s nearest station is Hassocks station, roughly 3.4 miles east of the centre. Nearby you’ll also find The Dene Hospital (2.9 miles north-east) and Clayton Castle (3.9 miles south-east). For a walk, there’s Wolstonbury Hill and Woods Mill.

Map of High Cross © OpenStreetMap contributors

When it’s something else

Before you book, it helps to know what’s not included:

  • A duct that is too small or badly routed for the kitchen (a design issue)
  • A worn-out fan that needs replacing
  • Sections that cannot be reached safely without new access (those are recorded, and panels can be fitted)

Not sure which it is? You can call us on 0345 646 2711 or send us an email and we’ll tell you honestly.

Where we work

  • Attenuators
  • Access panels
  • Vertical risers
  • Bends and junctions
  • Multi-storey ducts
  • Horizontal duct runs

FAQs for High Cross

Can you work in High Cross outside opening hours?

Yes. We work evenings, overnight and at weekends. That way a site in High Cross does not have to lose a day’s trading. When you call 0345 646 2711, or email photos, mention when the site is quiet.

Will you come out to High Cross?

Yes, High Cross is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.

What happens if you can’t reach some of it?

We record them on the report, with photos where possible, and we tell you what would make it reachable, such as extra access panels in ductwork.

Who is the responsible person?

Under the Regulatory Reform (Fire Safety) Order 2005, it’s the responsible person: normally the employer or whoever controls the premises. In shared or managed buildings, a landlord, facilities manager or managing agent can share the duty.

What’s involved in cleaning extract ducts?

We get into the duct through its access panels. Heavy grease is scraped out by hand, then the surfaces are degreased with a method that suits the deposit, such as degreasers, hot water or steam.

Can you quote from photos?

Often, yes. With good photos, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.

Can one contract cover all our sites?

Yes. Tell us the addresses and what each needs and you will get one fixed quote.

Which sectors do you work in?

Any commercial site with kitchens or ventilation, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.

How it works

Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the job takes a shift or more, depending on the length of the runs and the number of access points. In a small place like High Cross, the journey is planned ahead and the visit arranged around the site’s hours.

  1. We map the duct route and check where the access panels are.
  2. Grease readings are taken at set points along the duct.
  3. We open the panels and scrape out the heaviest grease.
  4. Horizontal runs and risers are then degreased by the method that suits the deposit.
  5. Readings and pictures are repeated and any section we couldn’t reach is recorded.

How to prepare

  • Agree a time when the area can be out of use
  • Allow time for equipment near the work to be turned off and cool down
  • Move anything stored near the system

Get a fixed quote

To get a fixed quote, phone us on 0345 646 2711, or send details by email and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We usually come back within one working day.

Ask for a quote

Related advice

Aftercare tips

No system stays clean for ever, but care slows the build-up. Our tips:

  • Keep to the interval on the report
  • Run the extract fan throughout service
  • Keep access panels clear of stored items
  • Get panels fitted where the duct couldn’t be cleaned

Grease readings are taken again at the same set points, giving you before and after readings. Before and after pictures sit next to the numbers.

Keep to the cleaning interval on the report. If the kitchen starts cooking longer hours, the interval may need to shorten, and grease thickness testing will show it.

Staff cleaning versus specialist work

Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.

When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.

Multi-site and managed buildings

We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.

Records are where multi-site compliance often slips. Every visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London