Kent · Ductwork cleaning
Duct cleaning in Greatstone-on-Sea
Ductwork cleaning for Greatstone-on-Sea, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Years of grease along the duct floor
- Duct runs that can’t be reached
- A grease test showing the duct is overdue
Ductwork cleaning in Greatstone-on-Sea, done properly
Not every duct has enough access panels. Where a section can’t be reached, TR19 expects it to be recorded on the report, and we can fit new access panels so it’s cleaned next time. An honest report beats a guess. If you have high readings at a recent grease test and smells of old cooking grease from the ductwork, we can help, from vertical risers, multi-storey ducts and access panels onwards.
Work in a small place like Greatstone-on-Sea starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
Insurers, fire officers and environmental health officers all look at records. That is why every job is written up in a report with pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Greatstone-on-Sea (TN28)
- Region
- Kent
- Records
- TR19® certificate and photo report
- Quote
- Fixed quote, usually within a working day
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Questions from Greatstone-on-Sea
Do you cover smaller places like Greatstone-on-Sea?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
Does the sea air around Greatstone-on-Sea make a difference to ductwork cleaning?
Yes, to a degree: at about 1 mile from the coast, Greatstone-on-Sea gets salt-laden air that corrodes metal faster. We look at fans, cowls and fixings for rust as well as grease.
Do you offer maintenance contracts?
Yes. We run scheduled maintenance contracts, set at the interval the system needs. The report from each visit recommends the next date.
Do you install duct access panels?
Yes, as part of our fits and repairs work. Panels go where they give the best access to sections that couldn’t be reached, and we will recommend where.
What is TR19?
TR19® is the BESA specification for keeping ventilation systems clean. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
How do you know if the ductwork needs cleaning?
Signs include grease dripping from joints, smells and a fan working harder, but the only sure way is to measure. Grease thickness testing shows exactly where the duct stands.
Can you quote from pictures?
Yes, where the pictures show enough. If not, a site survey comes first, and the quote follows that.
Is there a survey before the work?
Yes, always. Diagnosis comes before treatment: the survey shows what needs doing and what access we need, and the quote is based on that.
What your team can do, and what needs us
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Also near Greatstone-on-Sea
Other services in Greatstone-on-Sea
What affects the quote in Greatstone-on-Sea
You will get a fixed price before any work starts. It’s based on:
- The number of sites or systems
- What state the system is in
- Site rules, permits and inductions
- Whether we need access equipment or extra panels
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll explain each part.
What we need to know
We can often survey from pictures. Try to include:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Where the site is and what kind of site it is
- Your opening hours and when the area is out of use
- Close-ups of filters, grilles, hatches or access panels
Quoting starts with a diagnosis, either from photos and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before any work starts.
When something else is needed
Before you book, it helps to know what’s not included:
- Undersized or badly laid-out ducts
- Faulty fire dampers
- Sections that can’t be reached safely without new access (those are recorded, and panels can be fitted)
If you’re not sure, just ring 0345 646 2711 or drop us a line and we’ll give you a straight answer before you book.
What we work on in Greatstone-on-Sea
- Vertical risers
- Multi-storey ducts
- Attenuators
- Access panels
- Horizontal duct runs
- Bends and junctions
The process
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes a few hours for a short run, longer for long runs and tall risers. In a small place like Greatstone-on-Sea, the journey is planned ahead and the visit arranged around the site’s hours.
- First we diagnose: the route, the access and the grease levels.
- You get a fixed price before work starts.
- We clean section by section, working from panel to panel.
- Bends, risers and the base of each riser get extra attention.
- The duct is signed off with readings, pictures and a next clean date.
How to prepare
- Mention any parking or loading restrictions
- Tell us the best time to work, such as after service or at a weekend
- Arrange a key holder or contact on site
How to get a quote
Getting a quote does not take long. Call or email with a few details and you will normally have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Related advice
For landlords and multi-site operators
Whether it’s one building or many, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with photos.
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side, and the report can go to both.
Different parts, different methods
Horizontal duct runs
The underside of a horizontal duct collects the most grease. We scrape out the heavy layer first, then the walls and roof are cleaned too.
Access panels
After cleaning, every panel is closed and sealed so the duct stays tight. We’ll tell you if any panel needs replacing.
Common problems we fix in Greatstone-on-Sea
Damaged or poorly fitted filters let more grease into the duct. The duct then takes grease that the filters should have stopped, and build-up speeds up.
Any of these means the system needs a check-up:
- A duct nobody has opened in years
- Fat dripping from the ductwork
- Years of grease along the duct floor
- Smells of old cooking grease from the ductwork
Volunteers running a hall kitchen near St Peter's, or anywhere in Greatstone-on-Sea, may not know when the extract was last cleaned, and a grease test settles it.
What your quote should include
- What insurance they carry
- Whether the quote shows VAT
- Proof of accreditation you can verify
- What’s included in the scope, part by part
Ductwork cleaning in Greatstone-on-Sea: the local picture
Greatstone-on-Sea is within about 1 mile of the coast. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. According to Food Standards Agency records, there are about 5 bars, pubs and nightclubs within about 1.5 miles of central Greatstone-on-Sea. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. Fire safety in Greatstone-on-Sea falls to Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Term dates shape school work: for a school like Greatstone Primary School, an extract clean fits neatly into a half-term or summer break.
Greatstone-on-Sea is about 9 miles south-west of Hythe, in Kent. From the centre of Greatstone-on-Sea to the outskirts, we cover ductwork cleaning for every kind of premises, from small sites to large estates. Greatstone-on-Sea is one of 922 towns, villages and districts in Kent we cover for ductwork cleaning. Maidstone is in our area too, around 28 miles away.
All of TN28 is within our area for ductwork cleaning, from the main roads to the quietest streets. You’ll find streets such as Alfred Road, Meehan Road South and Hardy Road, and we cover them all for ductwork cleaning. Neighbouring places we cover for ductwork cleaning include Littlestone-on-Sea (1 mile north), New Romney (1 mile north-west), Lydd-on-Sea (2 miles south), Lydd (3 miles south-west) and St Mary's Bay (3 miles north). Within a short drive, we also cover Ashford (12 miles north), Folkestone (12 miles north-east), Hythe (9 miles north-east), Hawkinge (13 miles north-east), Tenterden (14 miles north-west) and Cheriton (11 miles north-east).
Local landmarks in Greatstone-on-Sea
We work in commercial kitchens and buildings around Romney Warren Country Park, The Marsh Academy and The Jolly Fisherman pub and the streets around them. Other landmarks nearby include Romney 'castle' (3.2 miles north-west) and Lydd Town Museum (2.8 miles south-west). Open spaces near Greatstone-on-Sea include Dungeness National and Burnthouse Pen.