Essex · Ductwork cleaning
Duct cleaning in Great Holland
Ductwork cleaning for commercial sites in Great Holland and across Essex. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- An insurer asking for TR19 evidence
- Ductwork that has never been cleaned
- Duct runs that cannot be reached
Ductwork cleaning in Great Holland, done properly
Not every duct has enough access panels. TR19 calls for any section we couldn’t reach to be recorded, and we can fit new access panels so it’s cleaned next time. An honest report beats a guess. If you’re dealing with heavy grease at the base of a riser and grease leaking from duct joints, we can put it right, from attenuators, multi-storey ducts and horizontal duct runs onwards.
In a village or hamlet like Great Holland, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
We are CHAS and SafeContractor accredited, we hold ISO 9001 and we are fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Where
- Great Holland (CO13)
- Region
- Essex
- Reporting
- Certificate and photo report
- Price
- A fixed price before we start
- When we work
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Checked
- 30 October 2026
What happens if it’s left?
A dirty duct is something insurers ask about. Many policies require TR19 cleaning, and a claim may be refused or reduced without evidence. A certificate that covers the ductwork is what they want to see. A fault that closes a site in a village like Great Holland affects everyone who depends on it.
Several systems or sites on one quote can make for a more efficient booking. Mention every system or site you need covered and we will price it together.
Why us?
- Out-of-hours work and a 24/7 emergency line
- Fixed quotes, usually within one working day
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Survey first, then a fixed quote
FAQs for Great Holland
Is ductwork cleaning any different in a coastal place like Great Holland?
It can. Salt air reaches Great Holland, which is within about 2 miles of the coast, and it speeds up rust. Rooftop fans, discharge cowls and fixings are checked for corrosion as well as grease.
Who enforces fire safety at workplaces in Great Holland?
That’s Essex County Fire and Rescue Service. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Do you look at the system first?
Yes, every time. Diagnosis comes before treatment: the survey tells us what the system needs and how to reach it, and the quote is based on that.
What if parts of the system cannot be reached?
They’re marked on the report. In ductwork, new access panels are often the answer, which we can install.
Can you look after several sites?
Yes. You deal with one contact for every site across London and the South East, and visits can be set on a regular cycle.
How much does ductwork cleaning cost?
There’s no set price, as it depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before we start.
When is the ductwork cleaned?
We plan the clean when you are not cooking. Overnight and weekend work is common, so no service is lost.
Which sectors do you work in?
Any commercial site with kitchens or ventilation, from a single café to a large school. We work with hotels, schools, care homes, offices, retail and leisure sites.
What ductwork cleaning looks like in Great Holland
The coast is only about 2 miles from Great Holland. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. Food Standards Agency records list about 26 restaurants, cafés and canteens and about 4 takeaways within 1.5 miles or so of the middle of Great Holland. Each kitchen that cooks under a canopy sends grease-laden air into a duct, where it cools and settles. Food hygiene inspections in Great Holland are the job of Tendring council’s environmental health team. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A dated certificate in the maintenance file answers the question before it’s asked.
Where a hall near Church of All Saints, or anywhere in Great Holland, hosts lunch clubs or events, its extract gathers grease just as a café’s does. If you cook for passing trade around Kirby Cross station, the extract can be cleaned between your last and first customer.
Great Holland is about 3 miles north-east of Clacton-on-Sea, in Essex. Across the CO13 area, we can carry out ductwork cleaning at your premises. We cover 644 places across Essex, from busy centres to quieter spots. For sites nearby, see our Chelmsford page (32 miles or so).
We work across CO13 for ductwork cleaning and the streets around it. Whether your site is on Rosery Mews, Orchard Drive and Laxton Grove or a nearby road, we can help. Neighbouring places we cover for ductwork cleaning include Kirby Cross (1 mile north-east), Kirby-le-Soken (1 mile north-east), Thorpe Cross (2 miles north-west), Lane End (2 miles north) and Frinton-on-Sea (2 miles east). Further out, we also cover Colchester (14 miles west), Clacton-on-Sea (3 miles south-west), Harwich (7 miles north), Camulodunum (15 miles west), Greenstead (12 miles west) and Wivenhoe (11 miles west).
Local landmarks in Great Holland
We work in commercial kitchens and buildings around Tendring Technology College, The Ship Inn and Greensward. Great Holland’s nearest station is Kirby Cross station, roughly 0.6 miles north. Not far away are Great Holland Pits.
Places near Great Holland
More services for Great Holland
Common problems we fix in Great Holland
Many ducts do not have enough access panels. Sections between panels go uncleaned, sometimes since the system was installed, and grease there keeps thickening unseen.
Look out for any of the following:
- Readings above 200 microns from a grease thickness test
- Duct runs with no cleaning record
- Thick deposits at the bottom of a vertical duct
- Grease leaking from duct joints
School kitchens, at schools like Kirby Primary Academy for example, are normally cleaned in the holidays so no lunches are lost.
Before booking anyone
- Whether the whole system is included, or only the parts that are easy to reach
- If they look at the system before pricing
- What insurance they carry
- Proof of accreditation you can verify
What the work involves, part by part
Vertical risers
A riser takes the duct up through one or more floors. Grease runs down the walls and gathers at the base, so the base is one of our test points.
Multi-storey and shared buildings
A duct that climbs several floors may be cleaned over more than one visit. We agree a sequence that suits the building, out of hours where possible.
Multi-site and managed buildings
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
Whether it’s one building or many, you get the same standard: diagnosis, a fixed price, work booked around your hours and a written report with pictures.
Keeping the system healthy
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Consider fitting panels where the report shows gaps
- Ask for a grease thickness test if the kitchen gets busier
- Flag drips from the duct straight away
- Keep grease filters clean and fitted whenever you cook
The report names every part of the duct that couldn’t be reached and why. You can then decide whether to have access panels fitted.
Keep to the cleaning interval on the report. A change in cooking hours may change the interval under BESA guidance, and grease thickness testing will show it.
How the visit works
When we arrive, we check the system against the survey or the photos you sent. If anything is different, we talk it through with the person on site before carrying on. From there, it takes from a few hours to more than one visit, depending on duct length and access. Somewhere as small as Great Holland, the date and timings are agreed with you well before the day.
- The duct route is surveyed and every access point found.
- We take grease readings along the route.
- Once the kitchen has closed, we protect the area and open the panels.
- Thick grease is scraped out, then the runs and risers are degreased.
- We close up, re-test, photograph and record anything out of reach.
Preparing for the visit
- Agree a time when the area can be out of use
- Let us know about permits to work or site inductions
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Get a fixed quote
Want a quote for ductwork cleaning? Please call us on 0345 646 2711, or send details by email with a few details about the site. We will explain what we’d do and send a fixed quote before anything is booked.
Advice
What affects the cost of ductwork cleaning
We quote each job individually. These are the things that affect it:
- How big the system is
- A single visit or a regular plan
- The condition of the system
- Site rules, permits and inductions
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re unsure, call 0345 646 2711 or send us an email and we will give you an honest view and a fixed quote.
What we need to know
A few details help us quote accurately. With your enquiry, please include:
- Your last certificate, test record or report
- Detail shots of panels, filters and grilles
- When the site is open and when it’s quiet
- The roof, plant room or outside wall the system runs to
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and we can price many jobs without a visit.