Oxfordshire · Ductwork cleaning
Ductwork Cleaning in Great Holcombe
Ductwork cleaning across Great Holcombe and nearby, timed so the site keeps working and finished with a written report and photos.
- Years of grease along the duct floor
- Grease pooling at the foot of the riser
- High readings at a recent grease test
What we are called out for in Great Holcombe
The further the air travels from the cooking, the cooler it gets. Cooling air drops its grease onto the inside of the duct, which is why ducts go on gathering grease well beyond the filters.
Signs it’s time to call us include:
- A duct nobody has opened in years
- Readings above 200 microns from a grease thickness test
- Grease seeping out of the duct seams
- Stale grease odours from the duct
Volunteers running a hall kitchen near Church of St Giles, or anywhere in Great Holcombe, may not know when the extract was last cleaned, and a grease test settles it.
What to look for in a quote
- Whether the whole system is included, or only the parts that are easy to reach
- Whether the figure could change on the day
- Whether VAT is included
- Proof of accreditation you can verify
Ductwork cleaning in Great Holcombe
Not every duct has enough access panels. TR19 calls for any section we couldn’t reach to be recorded, and we can fit new access panels so it’s cleaned next time. An honest report beats a guess. The work covers vertical risers, horizontal duct runs and access panels, and people most often call us about a duct clean needed for an insurer and years of grease along the duct floor.
Work in a small place like Great Holcombe starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
For insurers and inspectors, the record counts. That’s why every job is written up in a report with photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Location
- Great Holcombe (OX10)
- Wider area
- Oxfordshire
- Records
- TR19® certificate and photo report
- Price
- A fixed quote up front
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
What staff can safely do
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Leave it or put it right?
Fire inside a duct is out of sight and out of reach. It can travel through the ductwork to other parts of the building, which is why the duct matters as much as the canopy. Our emergency line runs 24/7, but a planned visit to Great Holcombe is calmer for everyone.
One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before work begins.
What you get with us
- A fixed price before any work starts
- Every job surveyed first
- One number for every site across the South East and London
- Evenings, overnight and weekends, plus 24/7 emergency callout
See how cleaning jobs are priced or our accreditations and certificates.
Managing agents and facilities teams in Great Holcombe
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
Great Holcombe kitchens: local notes
In Great Holcombe, food businesses are inspected by environmental health officers from South Oxfordshire council. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Keeping each certificate and photo report on file helps show the extract is looked after. About 45 miles out from central London, Great Holcombe is part of the South East area we work across. A survey and a fixed quote come first, then the visit at a time that suits you.
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Garsington Manor is about 3.8 miles north-west), access may need planning. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Littlemore Hospital is the nearest hospital to Great Holcombe, about 5.8 miles north-west.
Great Holcombe is about 3 miles north of Benson, in Oxfordshire. Wherever you are in the OX10 postcode area, we can take on ductwork cleaning. Across Oxfordshire, we cover 443 places, and Great Holcombe is one of them. We also work in Oxford, around 8 miles away.
All of OX10 is covered for ductwork cleaning, from busy streets to back roads. Neighbouring places we cover for ductwork cleaning include Newington (1 mile north), Drayton St Leonard (1 mile west), Brookhampton (1 mile north), Stadhampton (1 mile north) and Berrick Salome (1 mile south-east). Further out, we also cover Oxford (8 miles north-west), Didcot (7 miles south-west), Abingdon-on-Thames (7 miles west), Thame (9 miles north-east), Wantage (14 miles west) and Henley-on-Thames (13 miles south-east).
Local landmarks in Great Holcombe
We work in commercial kitchens and buildings around The Catherine Wheel pub. Other landmarks nearby include Brightwell Castle (4 miles south-west) and Littlemore Hospital (5.8 miles north-west). Open spaces near Great Holcombe include Wells Farm and Wittenham Clumps.
The process
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the work takes from a few hours to more than one visit, depending on duct length and access. A few photos of the system help us make the most of a visit to a place like Great Holcombe.
- We start by working out how the duct runs and where it can be opened.
- Set points along the runs are tested for grease.
- We open the panels and scrape out the heaviest grease.
- The duct is degreased with the method that suits the grease, from degreasers to hot water or steam.
- We test again, take pictures and note any part that couldn’t be reached.
Preparing for the visit
- Make sure equipment near the work can be switched off and left to cool
- Mention any parking or loading restrictions
- Have your last certificate or report to hand
Ask for a quote
Getting a quote does not take long. Call or email with a few details and you will typically have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
Keeping the system healthy
Think of this as the after-treatment advice, in brief:
- File each certificate and photo report in the maintenance log
- Keep grease filters clean and fitted whenever you cook
- Keep the fan on while anything is cooking
- Get panels fitted where the duct couldn’t be cleaned
A full system clean includes a TR19 certificate from the BESCA Vent Hygiene Elite portal. It records the date, the location and the technician.
Extra access panels mean more of the duct gets cleaned each time. Grease you can reach is grease that gets removed.
What the work involves, part by part
Bends and transitions
Bends, elbows and changes of size are where grease collects most. Slowing air leaves grease behind, so these points get extra attention.
Attenuators and discharge
At the end of the duct is the discharge. It can gather grease and mark the wall or roof around it, so it’s cleaned as far as safe access allows.
FAQs for Great Holcombe
Do you work overnight in Great Holcombe?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. Your opening times are the first thing we ask for.
Which fire and rescue service is responsible for Great Holcombe?
That is Oxfordshire Fire and Rescue Service. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
What shows that the ducts need a clean?
We measure it. Readings are taken by Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). A mean above 200 microns, or 500 microns at any point, means it’s due.
What happens if you cannot reach some of it?
They’re marked on the report. Often the fix is extra access, such as new panels in ductwork, which we can install.
Do you survey before quoting?
Yes. Photos often do the job, and larger or hidden systems get a visit.
How long does it take to clean extract ducts?
Duct length, access and grease levels all affect it. Typically it takes a shift or more, depending on the length of the runs and the number of access points.
How do you clean inside the ductwork?
After a survey and grease readings, the duct is opened up through its access panels. We clean the runs and risers section by section, and test again when we are done.
Can you price the work without visiting?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Where we cannot see enough, we arrange a survey.