West Sussex · Ductwork cleaning
Ferring ductwork cleaning
Ductwork cleaning for Ferring and the surrounding area: diagnosis first, then a fixed quote, the work and a report with pictures. Call for a fixed quote.
- Smells of old cooking grease from the ductwork
- Gaps where access panels were never fitted
- An insurer asking for TR19 evidence
Ductwork cleaning around Ferring
Ferring lies within about 1 mile of the sea. Salt in the air is hard on rooftop fans, discharge cowls and fixings, so we check them for corrosion as well as grease. The FSA’s data shows about 12 pubs and bars registered in and around Ferring, up to about a mile and a half out. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. The fire and rescue service for Ferring is West Sussex Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
School kitchens, at schools like Ferring CofE Primary School for example, are normally cleaned in the holidays so no lunches are lost. If you run a church or community hall kitchen, near St Andrew's Church or elsewhere in Ferring, its extract still collects grease from every lunch and event. If you cook for passing trade around Goring-By-Sea station, the extract can be cleaned between your last and first customer.
Ferring is about 2 miles south-west of Worthing, in West Sussex. Whether your site is in the middle of Ferring or further out, we cover ductwork cleaning for every kind of premises, from small sites to large estates. Ferring is one of 371 places in West Sussex we cover for ductwork cleaning. There’s also a page for Brighton, about 14 miles away.
Ductwork cleaning in BN12 is surveyed, quoted and booked the same way as anywhere else. You will find streets such as Pebble Lane, Ferringham Lane and Grange Park, and we cover them all for ductwork cleaning. Neighbouring places we cover for ductwork cleaning include Kingston Gorse (1 mile south-west), Hangleton (1 mile north-west), West Kingston (1 mile west), Goring-by-Sea (1 mile east) and Angmering-on-Sea (1 mile west). Larger places within reach include Bognor Regis (10 miles west), Chichester (15 miles west), Littlehampton (4 miles west), Shoreham-by-Sea (8 miles east), Lancing (6 miles east) and Rustington (3 miles west).
Around Ferring
Locally, jobs take us to businesses close to Durrington Minature Railway and Chatsmore Catholic High School and the streets around them. Ferring’s nearest station is Goring-By-Sea station, roughly 0.9 miles north-east. Other landmarks nearby include Rustington Museum (2.4 miles west) and Old Castle (2.6 miles north-east). For a walk, there’s Highdown Hill.
About our ductwork cleaning in Ferring
Not sure when the ductwork was last cleaned? A few details about the system are a good start when you call 0345 646 2711 or drop us a line, and we’ll send you a fixed quote for ductwork cleaning, normally within one working day. If you have hardened, baked-on grease in long horizontal runs and a rancid smell from the extract duct, we can help, from bends and junctions, access panels and horizontal duct runs onwards.
Around a smaller place like Ferring, kitchen extracts tend to belong to pubs, cafés, takeaways and school or care home kitchens. Quieter kitchens still collect grease in the duct, just more slowly, so the interval is set by hours of use and grease readings.
The report is your system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal and sits alongside the report.
- Location
- Ferring (BN12)
- Wider area
- West Sussex
- Records
- Certificate and photo report
- Quote
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
What happens on the day
We start by comparing what we find with the survey or your photos. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes a few hours for a short run, longer for long runs and tall risers. Visits to a place like Ferring are planned ahead, so we arrive with what the survey says the job needs.
- We trace the duct and find every way in.
- We take grease readings along the route.
- Once the kitchen has closed, we protect the area and open the panels.
- Thick grease is scraped out, then the runs and risers are degreased.
- Panels are closed, readings and photos repeated, and unreachable sections recorded.
Getting ready for the visit
- Dig out any earlier paperwork for the system
- Arrange a key holder or contact on site
- Agree a time when the area can be out of use
Get a fixed quote
Here’s what helps us quote: the address, the type of site and when it’s open, pictures of the system and the last certificate or report, if there is one. Then ring 0345 646 2711 or send us an email.
Related advice
What happens if it’s left?
BESA guidance says grease shouldn’t exceed a mean of 200 microns between cleans. Anywhere that reaches 500 microns or more needs immediate spot cleaning. Putting off the clean only pushes readings higher. Booking ahead lets us plan the trip to Ferring at a time that suits you.
Combining work into one visit or one programme can make for a more efficient booking. Mention every system or site you need covered, and you’ll get one fixed quote.
Why choose Duct Doctor in Ferring
- In business since 2009
- Survey first, then a fixed quote
- Full insurance on every job
- One contact for all your sites in London and the South East
Take a look at our cost guide and our accreditations and certificates.
Staff cleaning versus specialist work
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We’ll take a look and give you a fixed quote.
Staff cleaning does not replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
What affects the quote in Ferring
Before we fix a price, we need to know a few things. We check:
- Site rules, permits and inductions
- The times the site is available
- The condition of the system
- Whether we need access equipment or extra panels
We do not list prices on the website, because the cost depends on the site in front of us. For a fixed quote, call 0345 646 2711, or email photos, and we will talk you through it.
What we need to know
Photos let us diagnose from a distance. The most useful are:
- Any previous report or certificate
- Detail shots of panels, filters and grilles
- Photos showing the whole system and its surroundings
- Your opening hours and when the area is out of use
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Your questions about ductwork cleaning in Ferring
Which council inspects kitchens in Ferring?
Kitchens in Ferring are inspected by Arun council’s environmental health officers. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Does the sea air around Ferring make a difference to ductwork cleaning?
It can. Being within about 1 mile of the sea means more corrosion on metalwork in Ferring than inland. A fan housing that’s rusting near the coast can fail sooner, so it’s worth catching early.
Is there a survey before the work?
Yes, always. Diagnosis comes before treatment: the survey shows what needs doing and what access we need and the fixed quote is built on it.
How do you know if the ductwork needs cleaning?
A grease thickness test gives the answer. Readings are taken by Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). BESA guidance says the mean shouldn’t exceed 200 microns, and 500 or more anywhere needs immediate spot cleaning.
How long does ductwork cleaning take?
Short runs are quick, while long ducts and tall risers can need more than one visit. We plan the work around your kitchen.
Do you work in Ferring?
Yes. Our technicians work in Ferring, as part of our area across London and the South East.
What is TR19?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
What information do you need?
A short description and a few pictures, with the address and opening hours. We’ll ask for anything else we need.
Towns and villages near Ferring
What else we do in Ferring
Between visits
Once we’ve finished, these simple steps help:
- Store the certificate with the fire risk assessment
- Never cook with a filter missing
- Leave a way through to the access panels
- Don’t switch the extract off early
File the paperwork in the maintenance log. It’s the evidence an insurer or inspector may ask for, and the pictures make the duct’s condition easy to see.
Extra access panels mean more of the duct gets cleaned each time. It doesn’t stop grease forming, but it stops it building unseen.
Part by part
Horizontal duct runs
A long flat run can’t be cleaned from one end. Any stretch out of reach is noted and can fit extra panels.
Attenuators and discharge
The last section of duct before the discharge is often the coolest, which can mean heavier deposits. We include it in the clean and the readings.
When something else is needed
We’ll always give you a straight diagnosis, so here’s what ductwork cleaning won’t do:
- A failed fan motor at the end of the duct (a fan repair job)
- Parts of the duct with no way in
- Faulty fire dampers
Not sure which it is? You can phone us on 0345 646 2711 or drop us a line and we will tell you honestly before you book.
What the work covers
- Access panels
- Multi-storey ducts
- Vertical risers
- Attenuators
- Horizontal duct runs
- Bends and junctions