Kent · Ductwork cleaning
Ductwork cleaning in Eastwood, Kent
Ductwork cleaning for Eastwood, with a survey first and a report with photos at the end. Call for a fixed quote.
- Smells of old cooking grease from the ductwork
- Years of grease along the duct floor
- Duct runs that cannot be reached
How we handle ductwork cleaning in Eastwood
Between the canopy and the fan runs the ductwork, hidden above ceilings and inside walls. Every horizontal run and vertical riser collects grease along the way and a fire in the duct can spread through the building. Our ductwork cleaning reaches inside the runs and risers through access panels, to BESA TR19® Grease. Typical jobs include fat dripping from the ductwork and a duct nobody has opened in years, across access panels, horizontal duct runs and bends and junctions.
Work in a small place like Eastwood starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Eastwood (ME17)
- Wider area
- Kent
- Records
- Certificate and photo report
- Quotes
- Fixed quote, usually within a working day
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
In-house cleaning or a specialist?
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We will take a look and give you a fixed quote.
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
Part by part
Access panels
After cleaning, every panel is closed and sealed, so grease and air stay inside the duct. A damaged panel is noted on the report.
Multi-storey and shared buildings
In a building with several floors, the duct may pass other tenants’ spaces. Access is planned with the building’s managers, so the clean is done safely and quietly.
Keeping the system healthy
Here’s the after-treatment advice, in brief:
- Get panels fitted where the duct couldn’t be cleaned
- Tell us if grease leaks from the ductwork
- Keep access panels clear of stored items
- Keep your cleaning records together
Access panels are closed and sealed back up after cleaning, and the surrounding area is left clean. Grease and dirty water are contained and removed.
Have access panels fitted where sections can’t be reached. It doesn’t stop grease forming, but it stops it building unseen.
When to call us in Eastwood
Grease settles fastest where the air slows down. Flat runs, bends, reducers and the base of risers are the usual hotspots, and those are the points we pay most attention to.
These are the problems we see most often:
- Duct runs with no cleaning record
- Grease pooling at the foot of the riser
- Gaps where access panels were never fitted
- Years of grease along the duct floor
Bursars and site managers at schools such as Ulcombe Church of England Primary School tend to book extract cleaning for when the kitchen is empty.
What your quote should include
- What’s included in the scope, part by part
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- What hours they’ll be on site
- When the next visit should be, and why
When something else is needed
Some problems need a different service or another trade:
- Duct sealed behind fixed ceilings or walls
- A worn-out fan that needs replacing
- Duct sections that need replacing
Not sure which it is? You can give us a ring on 0345 646 2711 or drop us a line and we will tell you honestly before booking.
What we work on in Eastwood
- Attenuators
- Access panels
- Bends and junctions
- Multi-storey ducts
- Horizontal duct runs
- Vertical risers
Eastwood kitchens: local notes
We cover Eastwood, about 38 miles from central London, as part of our work across London and the South East. We work evenings, overnight and at weekends, so the visit fits around the site. The fire and rescue service for Eastwood is Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Leeds Castle, about 3.4 miles north-west, is one of the historic houses near Eastwood; if you run event catering at a venue like that, cleans can be booked between functions.
Eastwood is about 7 miles south-east of Maidstone, in Kent. Across the ME17 area, we cover ductwork cleaning for commercial sites. Our Kent coverage runs to 922 places, Eastwood among them. We also work in Maidstone, around 7 miles away.
Ductwork cleaning in ME17 is surveyed, quoted and booked the same way as anywhere else. If your site is just outside Eastwood, we cover Broadstone (1 mile south-east), Grafty Green (1 mile east), Ulcombe (1 mile north-west), Fairbourne Heath (1 mile north) and Liverton Street (1 mile north-east). Further out, we also cover Maidstone (7 miles north-west), Ashford (10 miles south-east), Sittingbourne (10 miles north), Faversham (12 miles north-east), Kings Hill (12 miles north-west) and Davington (12 miles north-east).
Around Eastwood
Typical jobs here are in premises near The Provender Public House and the streets around them. For rail, the closest station is Harrietsham station, roughly 2.8 miles north. A little further out are The Dog Collar Museum (3.2 miles north-west) and Coldbridge Castle (1.6 miles east).
For landlords and multi-site operators
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
When the building owner and the occupier are different, the lease normally sets out who maintains what. We’re happy to deal with either side, and the report can go to both.
How the visit works
We start by comparing what we find with the survey or your photos. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes a few hours for a short run, longer for long runs and tall risers. Photos of the system and how to reach it help us plan a visit to Eastwood.
- First the duct route is traced and every access point noted.
- Grease readings are taken at set points along the duct.
- Through the access panels, thick grease is removed by hand first.
- The duct is degreased with the method that suits the grease, from degreasers to hot water or steam.
- Post-clean readings and photos go into the report, with any unreachable section listed.
Before we arrive
- Make sure someone can let us in and lock up afterwards
- Plan for cooking equipment or plant to be off before we arrive
- Have your last certificate or report to hand
Get a fixed quote
There’s no standard price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To start, call 0345 646 2711 or email us.
Related advice
FAQs for Eastwood
Who is the fire and rescue service for Eastwood?
Fire safety enforcement in Eastwood is handled by Kent Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Do you work at weekends in Eastwood?
Yes, out-of-hours work is a big part of what we do. Your customers, staff or residents in Eastwood needn’t be disturbed. When you ring 0345 646 2711 or use the quote form, mention when the site is quiet.
Is Eastwood in your area?
Yes. Our technicians work in Eastwood, as part of our area across London and the South East.
How much notice do you need?
Earlier is better, particularly for night and weekend visits. We normally quote within one working day, and there’s a 24/7 line for emergencies.
Will I get a report after the ducts are cleaned?
Readings, pictures and, for a full clean, a TR19 certificate. It also gives a recommended next clean date.
How do you keep the site clean during the work?
We start with protection: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
How can I tell if my extract ducts are dirty?
Drips, smells and weak extraction are clues, but the only sure way is to measure. Grease thickness testing shows exactly where the duct stands.
Is TR19 a legal requirement?
No. The law sets the duty; TR19® is the benchmark used to show it’s met. Under the Fire Safety Order 2005, the responsible person must reduce fire risk, and many insurers can refuse or reduce a claim without proof of cleaning.