Essex · Ductwork cleaning
Easthorpe ductwork cleaning
Need ductwork cleaning in Easthorpe? We survey first, send you a fixed quote and work around your opening hours, finishing with a written report and pictures.
- Fat dripping from the ductwork
- Sections of duct with no access panels
- Thick crusts of old grease along the duct
Ductwork cleaning in Easthorpe, done properly
We treat ductwork like a doctor treats arteries: find the blockages, clear them, then check the flow is right. Readings taken before and after show the difference, alongside before and after pictures. The work covers vertical risers, attenuators and bends and junctions, and common reasons people get in touch are sections of duct with no access panels and heavy grease at the base of a riser.
In a small place like Easthorpe, kitchens are often in older or extended buildings, with long single-storey duct runs, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal and sits alongside the report.
- Location
- Easthorpe (CO5)
- Wider area
- Essex
- Records
- Certificate plus before-and-after photos
- Quote
- Fixed quote, normally within a working day
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
How the visit works
The visit has three parts: set-up, the treatment itself and the sign-off. Set-up means sheeting and making equipment safe, while signing off means the written report and photos. The middle part takes longest, which takes from a few hours to more than one visit, depending on duct length and access. Seeing the system in photos first means the trip to Easthorpe can be planned properly.
- We trace the duct and find every way in.
- Grease thickness is measured at set points.
- Out of hours, the area is protected and the access panels opened.
- Thick grease is scraped out, then the runs and risers are degreased.
- Panels are closed, readings and pictures repeated, and unreachable sections recorded.
How to prepare
- Let us know about permits to work or site inductions
- Tell us the best time to work, such as after service or at a weekend
- Find the previous report, if there is one
How to get a quote
For a fixed quote, call 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. We usually come back within one working day.
Advice
What a clean will not put right
Not every problem is solved by ductwork cleaning, and we’d rather say so up front. It will not put right:
- Sections that can’t be reached safely without new access (those are recorded, and panels can be fitted)
- A duct that is too small or badly routed for the kitchen (a design issue)
- A damper stuck open in the duct
If in doubt, call 0345 646 2711 or drop us a line and we’ll say what we think before booking.
Parts of the system we cover
- Horizontal duct runs
- Vertical risers
- Bends and junctions
- Attenuators
- Access panels
- Multi-storey ducts
Nearby places to Easthorpe
What else we do in Easthorpe
Easthorpe: your questions answered
Do you work overnight in Easthorpe?
Yes. We work evenings, overnight and at weekends. Your customers, staff or residents in Easthorpe needn’t be disturbed. When you ring 0345 646 2711, or send details by email, mention when the site is quiet.
Who would carry out a food hygiene inspection at a kitchen in Easthorpe?
In Easthorpe, it’s Colchester council that carries out food hygiene inspections. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Do you have a 24/7 line?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line and we will talk you through the next steps.
What happens if there aren’t enough access panels?
Every reachable section is cleaned and the rest recorded. Fitting extra access panels is the usual answer, and we can do that for you.
What is TR19?
TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
What shows that the ducts need a clean?
The date on the last certificate is the first thing to check. If it’s overdue, or there isn’t one, a clean is due, and grease readings will confirm how urgent it is.
How long does ductwork cleaning take?
It takes from a few hours to more than one visit, depending on duct length and access. We will confirm the time when we quote.
Is TR19 a legal requirement?
No. The law sets the duty; TR19® is the benchmark used to show it’s met. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and without records, many insurers may refuse or reduce a claim.
Managing agents and facilities teams in Easthorpe
Whether it’s one building or many, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with photos.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Between visits
How long the results last depends on use and care. Here’s what we suggest:
- Ask us about extra access panels where sections cannot be reached
- Ask for a grease thickness test if the kitchen gets busier
- Diarise the next duct clean
- Don’t block access panels with shelving or stock
Keep the certificate and report with the fire risk assessment. It’s the evidence an insurer or inspector may ask for, and the pictures make the duct’s condition easy to see.
Keep to the cleaning interval on the report. A change in cooking hours may change the interval under BESA guidance, and grease thickness testing will show it.
What affects the quote in Easthorpe
Sites vary more than people expect. The main factors:
- One-off work versus a regular cycle
- Where the site is and how we reach it
- What state the system is in
- Access, including roofs, risers and ceiling voids
The price reflects the work, not guesswork. That’s why every job is surveyed first, and the price is agreed before any work starts.
Helping us quote
We can often survey from pictures. The most useful are:
- Any access panels or hatches you can see
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Your last certificate, test record or report
- Wide photos of the system and the area around it
Getting a quote doesn’t take long. Send a few details and pictures, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Why act early in Easthorpe
Insurers know the risk of a greasy duct. Many require cleaning to TR19, and they can refuse or reduce a claim without proof. A certificate that covers the ductwork is what they want to see. Our emergency line runs 24/7, but a planned visit to Easthorpe is calmer for everyone.
Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you’re not sure what’s needed, phone us on 0345 646 2711 or drop us a line for straight advice and a fixed quote.
What you get with us
- CHAS, SafeContractor and ISO 9001
- Evenings, overnight and weekends, plus 24/7 emergency callout
- A written report with photos after every visit
- We are fully insured
Take a look at our cost guide and our accreditations.
Ductwork cleaning around Easthorpe
The FSA’s food hygiene register shows about 3 restaurants, cafés and canteens within 1.5 miles or so of the middle of Easthorpe. Behind every canopy among them is a run of ductwork that collects grease out of sight. Environmental health officers from Colchester council inspect food businesses in Easthorpe. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A TR19® certificate and photo report after each clean gives you a record to show an inspector. Fire safety in Easthorpe falls to Essex County Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
If you run catering at a historic house or estate in the area (Layer Marney Tower is about 2.7 miles south), event kitchens in older buildings often have awkward duct runs that need planning. Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Easthorpe is Essex County Hospital, about 5.3 miles east. A hall kitchen that only cooks for events, whether near Church of St Mary or elsewhere in Easthorpe, still needs its extract cleaned, just less often.
Easthorpe is about 6 miles west of Colchester, in Essex. Sites in Easthorpe get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. 644 places in Essex are on our list, large and small. Our Chelmsford page covers sites nearby, about 15 miles away.
Work in CO5 follows the same survey, fixed quote and written report as everywhere else we cover. We also cover Mulberry Green (1 mile north-east), Marks Tey (1 mile north), Little Tey (2 miles north-west), Copford (2 miles north-east) and Messing (2 miles south-west). Larger places within reach include Colchester (6 miles east), Chelmsford (15 miles south-west), Braintree (9 miles west), Maldon (10 miles south-west), Witham (7 miles south-west) and Camulodunum (4 miles east).
Near you in Easthorpe
Typical jobs here are in premises near House Without A Name Public House. The nearest railway station is Marks Tey station, roughly 1.5 miles north. Well-known places in the area include Anchor Press Museum (3.3 miles south) and Birch Castle (2.2 miles south-east). Open spaces near Easthorpe include Iron Latch.
How the job changes from site to site
Bends and transitions
Bends, elbows and changes of size are where grease collects most. Slowing air leaves grease behind, so we clean these points carefully.
Vertical risers
Risers often pass through floors and walls, so fire dampers may be fitted where it crosses them. We test those as a separate job.