Oxfordshire · Ductwork cleaning
Duct cleaning in Bladon
Ductwork cleaning for Bladon and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Gaps where access panels were never fitted
- Proof of duct cleaning for the insurer
- Grease pooling at the foot of the riser
Ductwork cleaning for kitchens and businesses in Bladon
Once air leaves the canopy, it travels through ductwork that most people never see. Every horizontal run and vertical riser collects grease along the way, and that’s where a kitchen fire can travel. Our ductwork cleaning reaches inside the runs and risers through access panels, to BESA TR19® Grease. The work covers attenuators, multi-storey ducts and bends and junctions, and people most often call us about grease pooling at the foot of the riser and hardened, baked-on grease in long horizontal runs.
For a kitchen in or near Bladon, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we are fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Where
- Bladon (OX20)
- Wider area
- Oxfordshire
- Records
- Certificate plus before-and-after pictures
- Quote
- A fixed quote up front
- Working hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Part by part
Access panels
We can fit new access panels where the duct needs them, so the next clean reaches more of the system. We will recommend where they should go.
Horizontal duct runs
A long flat run cannot be cleaned from one end. Where the gaps between panels are too long, we record what couldn’t be reached and can fit extra panels.
When to call us in Bladon
Damaged or poorly fitted filters let more grease into the duct. More grease reaches the ductwork than it should and it fills faster.
Clients normally contact us after spotting one of these:
- A duct nobody has opened in years
- Duct runs that cannot be reached
- An insurer asking for TR19 evidence
- Grease leaking from duct joints
If your kitchen is in a listed or historic building, like the houses around Bladon (Blenheim Palace is about 0.9 miles north-west), fitting access panels needs care.
Questions to ask before you book
- Whether the quote is based on a survey or pictures
- Whether the work can be done while the site is closed
- Whether the quote shows VAT
- Whether the price is fixed
Aftercare tips
Results last longer with the right care. We suggest:
- Don’t switch the extract off early
- Keep your cleaning records together
- Keep access panels clear of stored items
- Flag drips from the duct right away
Keep the certificate and report with the fire risk assessment. It’s the evidence an insurer or inspector may ask for, and the pictures make the duct’s condition easy to see.
Keep to the cleaning interval on the report. A change in cooking hours may change the interval under BESA guidance, and grease thickness testing will show it.
What ductwork cleaning looks like in Bladon
The FSA’s data shows about 7 bars, pubs and nightclubs and about 6 hotels, B&Bs and guest houses registered in Bladon and the streets around it, up to about 1.5 miles out. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. Oxfordshire Fire and Rescue Service covers Bladon. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Environmental health officers from West Oxfordshire council inspect food businesses in Bladon. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Keeping each certificate and photo report on file helps show the extract is looked after.
For schools such as Bladon Church of England Primary School, kitchen extract cleaning is normally booked for the holidays, when the canteen is closed. Volunteers running a hall kitchen near St Martin's Church, or anywhere in Bladon, may not know when the extract was last cleaned, and a grease test settles it.
Bladon is about 7 miles north-east of Witney, in Oxfordshire. Wherever you are in the OX20 postcode area, we can take on ductwork cleaning. Across Oxfordshire, we cover 443 places, Bladon among them. For sites nearby, see our Oxford page, about 7 miles away.
Ductwork cleaning in OX20 is surveyed, quoted and booked the same way as anywhere else. Whether your site is on The Green, Park Street and Lamb Lane or a nearby road, we can help. Nearby, we also carry out ductwork cleaning in Woodstock (1 mile north), Begbroke (1 mile east), Church Hanborough (2 miles south-west), Long Hanborough (2 miles west) and Thrupp (2 miles east). We also work in nearby towns such as Oxford (7 miles south-east), Bicester (10 miles north-east), Abingdon-on-Thames (11 miles south), Witney (7 miles south-west), Carterton (11 miles south-west) and Kidlington (3 miles east).
Near you in Bladon
Typical jobs here are in premises near The White House and The Marlborough Church of England School, among other places. For rail, the closest station is Hanborough station, roughly 1 mile west. Nearby you will also find Oxford Bus Museum (1 mile west). The countryside around Bladon includes Hook Meadow and The Trap Grounds.
More services for Bladon
Your questions about ductwork cleaning in Bladon
Is Bladon within the area you cover?
Yes. Bladon is within the area we cover across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Who is the fire and rescue service for Bladon?
Fire safety enforcement in Bladon is handled by Oxfordshire Fire and Rescue Service. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
How much does ductwork cleaning cost?
Every site is different, so each gets its own fixed quote. To get one, call us on 0345 646 2711, or email photos and tell us about the site and its opening hours.
What do you do with what you remove?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on, so it does not spread.
Are you insured?
Yes. We carry full insurance and have been trading since 2009.
How do you know if the ductwork needs cleaning?
A grease thickness test gives the answer. Readings are taken by Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). BESA guidance says the mean shouldn’t exceed 200 microns, and 500 or more anywhere needs immediate spot cleaning.
When is the ductwork cleaned?
We plan the clean when you’re not cooking. Overnight and weekend work is common, so no service is lost.
Can you clean ductwork with no access panels?
Every reachable section is cleaned and the rest recorded. Extra panels can be installed, and we can do that for you.
What your team can do, and what needs us
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.
The process
A visit follows the same order every time: sheeting and protection first, isolate whatever needs isolating, carry out the ductwork cleaning, tidy up and leave you the report. The visit itself takes a shift or more, depending on the length of the runs and the number of access points. A quick note on how to find the site and where to park makes a visit to Bladon run smoothly.
- First the duct route is traced and every access point noted.
- Grease readings are taken at set points along the duct.
- Through the access panels, thick grease is removed by hand first.
- The duct is degreased with the method that suits the grease, from degreasers to hot water or steam.
- We test again, take photos and note any part that couldn’t be reached.
How to prepare
- Make sure equipment near the work can be switched off and left to cool
- Dig out any earlier paperwork for the system
- Let us know when the site is closed or quiet
Getting a quote
Need a price for ductwork cleaning? Please ring 0345 646 2711, or send details by email and tell us about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Related advice
For landlords and multi-site operators
We regularly work with managing agents. Send the address, what’s needed and how access works, and we will send a fixed quote.
Facilities teams in offices, schools and healthcare sites book us too across Oxfordshire. Larger estates can be phased building by building to keep disruption down.
When something else is needed
Some problems need a different service or another trade:
- A worn-out fan that needs replacing
- Ductwork that’s corroded, split or holed (that needs a ductwork contractor)
- Ductwork that was poorly designed
Not sure which it is? You can call us on 0345 646 2711, or email photos and we will tell you honestly.
Where we work
- Multi-storey ducts
- Vertical risers
- Horizontal duct runs
- Access panels
- Attenuators
- Bends and junctions