Kent · Ductwork cleaning
Duct cleaning in Bean
Specialist ductwork cleaning for Bean: diagnosis first, then a fixed quote, the work and a report with pictures. Ask us for a fixed quote.
- A rancid smell from the extract duct
- A grease test showing the duct is overdue
- Duct runs that cannot be reached
Ductwork cleaning for kitchens and businesses in Bean
Each extract duct we take on in Bean goes through the full routine: readings at set points, heavy grease scraped out by hand, then degreasing to suit the deposit. Readings are taken again afterwards and photos go into your report. Typical jobs include thick deposits at the bottom of a vertical duct and grease leaking from duct joints, across horizontal duct runs, multi-storey ducts and access panels.
Work in a small place like Bean starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
We have been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
- Place
- Bean (DA2)
- Wider area
- Kent
- Paperwork
- Certificate plus before-and-after photos
- Quotes
- Fixed quote, normally within a working day
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
What the work involves, part by part
Horizontal duct runs
Long horizontal runs need access panels at regular intervals. Where the gaps between panels are too long, we record what couldn’t be reached and can fit extra panels.
Bends and transitions
Transitions from the canopy spigot into the duct catch a lot of grease. We reach it from the plenum side where possible.
Nearby places to Bean
More services for Bean
Managing agents and facilities teams in Bean
Running several sites is easier with one contractor. We cover South East England and London, so visits at different addresses can be planned together and kept to a regular schedule.
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
Keeping the system healthy
Good habits slow the build-up between visits. A few tips:
- Ask for a grease thickness test if the kitchen gets busier
- Keep access panels clear of stored items
- File each certificate and photo report in the maintenance log
- Consider fitting panels where the report shows gaps
After the clean, the same points are tested again, giving you before and after readings. Photos of each section go alongside them.
Book the next duct clean before the date passes. If the kitchen starts cooking longer hours, the interval may need to shorten, and grease thickness testing will show it.
Ductwork cleaning around Bean
The Food Standards Agency lists about 4 pubs, bars and clubs as registered food businesses within about 1.5 miles of central Bean. Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. In Bean, food businesses are inspected by environmental health officers from Dartford council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Keeping each certificate and photo report on file helps show the extract is looked after. The fire and rescue service for Bean is Kent Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
Term dates shape school work: for a school like Bean Primary School, an extract clean fits neatly into a half-term or summer break.
Bean is about 3 miles west of Northfleet, in Kent. For ductwork cleaning in and around Bean, please give us a ring on 0345 646 2711 or send us an email for a fixed quote. We work across South East England and London, including Bean. Bean is one of 922 towns, villages and districts in Kent where we work for commercial clients. For sites nearby, see our Maidstone page (15 miles or so).
We work across DA2 for ductwork cleaning and the roads nearby. We cover sites on High Street, Drudgeon Way and Foxwood Road and nearby roads. You will find Bean on the B255, so it’s easy for us to get to for out-of-hours visits. Close by, we work in Green Street Green (1 mile south), Westwood (1 mile south-east), Darenth (1 mile west), Swanscombe (1 mile north) and Grubb Street (1 mile south). Further out, we also cover Maidstone (15 miles south-east), Dartford (3 miles north-west), Sevenoaks (11 miles south-west), Gravesend (4 miles east), Northfleet (3 miles east) and Swanley (5 miles south-west).
Around Bean
In Bean, that means kitchens and buildings near Beacon Wood Country Park, The Ebbsfleet Academy and The Black Horse pub and the streets around them. The closest station to Bean is Greenhithe for Bluewater station, about 1.7 miles north. A little further out are Stone Museum of Geology (2.2 miles north-west) and Stone Castle (1.2 miles north). For a walk, there’s Chafford Gorges Nature Park and Sawyers Lake.
What happens if it’s left?
Fire inside a duct is out of sight and out of reach. It can travel through the ductwork to other parts of the building, which is why the duct matters as much as the canopy. In a place like Bean, ductwork and fans are easy to forget until something goes wrong.
When the work has to happen, how we reach it and how big the site is can all change the price. Each of those is built into the quote, and the price is fixed before any work starts.
Why us?
- Photo reports with every job
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Trading since 2009
- Fixed quotes, usually within one working day
Take a look at what affects the cost and how to check a contractor.
Your questions about ductwork cleaning in Bean
Who inspects food businesses in Bean?
Kitchens in Bean are inspected by Dartford council’s environmental health officers. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Can you work in Bean outside opening hours?
Yes. We work evenings, overnight and at weekends. It means the site in Bean keeps running as normal. Your opening times are the first thing we ask for.
What shows that the ducts need a clean?
Signs include grease dripping from joints, smells and a fan working harder, but the only sure way is to measure. A WFTT or DTT reading gives a clear answer.
How much notice should we give?
For planned work, earlier is better, especially if the next clean or test is due soon. For emergencies, we take calls 24/7.
Do you offer maintenance contracts?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, depending on what the system needs.
Can one contract cover all our sites?
Yes. You deal with one contact for every site in our area, and visits can be set on a regular cycle.
How is kitchen extract ductwork cleaned?
After a survey and grease readings, the duct is opened up through its access panels. We clean the runs and risers section by section, and test again when we are done.
Is TR19 a legal requirement?
No. TR19® is BESA’s specification, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
Common problems we fix in Bean
Grease in a duct running from a kitchen in Bean is as much a fire risk as in any building. Burning grease can carry fire through the ductwork to other rooms or floors, which is why the responsible person needs it under control.
It’s time to book a visit if you see:
- Years of grease along the duct floor
- Sections of duct with no access panels
- Fat dripping from the ductwork
- Smells of old cooking grease from the ductwork
Healthcare kitchens, like those at hospitals such as Darent Valley Hospital (about 1.3 miles north-west), often cook for long hours, which puts them in BESA’s heavier-use bands.
Questions to ask before booking
- Whether the work can be done while the site is closed
- Whether they’re fully insured
- Whether the quote shows VAT
- Whether the price is fixed
The process
Before we leave, we walk the area with whoever is on site. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. The visit takes a few hours for a short run, longer for long runs and tall risers. If the van will struggle with a lane or gateway near Bean, let us know and we’ll plan around it.
- We start by working out how the duct runs and where it can be opened.
- Grease readings are taken at set points along the duct.
- Through the access panels, thick grease is removed by hand first.
- Horizontal runs and risers are then degreased by the method that suits the deposit.
- Post-clean readings and photos go into the report, with any unreachable section listed.
Getting ready for the visit
- Move anything stored near the system
- Name a contact who can let us in at the agreed time
- Let us know when the site is closed or quiet
Getting a quote
We don’t publish a price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, and then give you a fixed quote. To get going, call us on 0345 646 2711 or email us.
Advice
How we price ductwork cleaning
The price is fixed before any work begins. It takes into account:
- Access, including roofs, risers and ceiling voids
- Site rules, permits and inductions
- What state the system is in
- Travel, parking and unloading
Every site is different, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
Asking for a quote
You do not need the technical terms. It helps if you can send:
- Your last certificate, test record or report
- Any symptoms, from odd noises to smells or leaks
- How we’d reach plant on a roof or in a plant room
- Your opening hours and when the area is out of use
Every quote begins with a look at the system, from your pictures and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work so you know the cost before we start.