West Berkshire · Ductwork cleaning
Bagnor ductwork cleaning
Ductwork cleaning in Bagnor, surveyed first and signed off with a written report and pictures. Ask us for a fixed quote.
- Duct runs with no cleaning record
- Grease pooling at the foot of the riser
- Smells of old cooking grease from the ductwork
Ductwork cleaning in Bagnor
Duct cleaning is the hardest part of an extract clean, and the part most often skipped. Sections with no way in can go uncleaned for years. We open up every reachable section and record any we can’t reach, so you know exactly where you stand. Common call-outs are for a duct clean needed for an insurer and sections of duct with no access panels, across access panels, attenuators and horizontal duct runs.
For a kitchen in or near Bagnor, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Location
- Bagnor (RG14, RG20)
- Wider area
- West Berkshire
- Records
- Certificate and photo report
- Quotes
- A fixed price before any work starts
- Working hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
When something else is needed
To be straight with you, there are a few things this work will not fix:
- A duct that is too small or badly routed for the kitchen (a design issue)
- Leaking duct joints that need repair
- Sections that cannot be reached safely without new access (those are recorded, and panels can be fitted)
Not sure which it is? You can ring 0345 646 2711, or send details by email and we will tell you honestly.
Where we work
- Horizontal duct runs
- Attenuators
- Vertical risers
- Bends and junctions
- Multi-storey ducts
- Access panels
Nearby places to Bagnor
What else we do in Bagnor
Ductwork cleaning in Bagnor: the local picture
The FSA’s food hygiene register includes about 24 bars, pubs and nightclubs and about 6 hotels, B&Bs and guest houses across Bagnor and its immediate surroundings (about a mile and a half). Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. Royal Berkshire Fire and Rescue Service covers Bagnor. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. In Bagnor, food businesses are inspected by environmental health officers from West Berkshire council. Extraction counts as kitchen equipment, so its condition can come up on the day. A dated certificate in the maintenance file answers the question before it’s asked.
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; West Berkshire Community Hospital is the nearest hospital to Bagnor, about 2.5 miles east. Benham Park, about 0.8 miles west, is one of the historic houses near Bagnor; if you run event catering at a venue like that, cleans can be booked between functions. Volunteers running a hall kitchen near Parish Church of St Mary, or anywhere in Bagnor, may not know when the extract was last cleaned, and a grease test settles it.
Bagnor is about 1 mile north-west of Newbury, in West Berkshire. For ductwork cleaning in and around Bagnor, it’s easy to get a fixed quote: please call 0345 646 2711, or send details by email. Our area covers London and the South East, including Bagnor. Bagnor is one of 155 places in West Berkshire we cover for commercial clients. For sites nearby, see our Reading page, about 16 miles away.
Here we cover the RG14 and RG20 postcode area for ductwork cleaning. We cover sites on Bath Road, Pound Lane and Speen Lane and nearby roads. Other places close to Bagnor include Speen (1 mile south), Donnington (1 mile north-east), Speenhamland (1 mile east), Stockcross (1 mile west) and Marsh Benham (2 miles west). Further out, we also cover Thatcham (4 miles east), Burghfield Common (12 miles east), Hungerford (7 miles west), Calcot (13 miles east), Lambourn (10 miles north-west) and Burghfield Hill (13 miles east).
Around Bagnor
Locally, jobs take us to businesses close to Trinity School, Victoria Park and The Starting Gate pub, among other places. For rail, the closest station is Newbury station, roughly 1.5 miles south-east. A little further out are Donnington Castle (0.8 miles north-east) and British Balloon Museum & Library Ltd (1.3 miles south-east). Open spaces near Bagnor include Rack Marsh.
Why deal with it now?
A partly blocked duct slows the airflow. The fan works harder, the kitchen gets hotter and smoke lingers at the canopy and grease can drip from duct joints. If the system at a site near Bagnor fails, there may be nowhere nearby to move to.
Working hours, access and the scale of the site all affect the cost. We take each of them into account, and the price is fixed before we start.
Why us?
- Work around your opening hours, with 24/7 emergency cover
- Fully insured
- CHAS, SafeContractor and ISO 9001
- One contact for all your sites in London and the South East
Read our cost guide and our accreditations.
For landlords and multi-site operators
Keeping records across a portfolio is half the battle. Every visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.
From a single site to a large estate, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with photos.
Your questions about ductwork cleaning in Bagnor
Do you work in villages like Bagnor?
Yes, smaller places are covered as well as towns. Photos of the system and directions to the site help us plan the visit.
Can a school canteen extract in Bagnor be done out of term time?
Yes. Half-terms and the summer break are the natural time for school work. With about 6 schools and colleges on the FSA’s register within roughly a mile and a half of Bagnor, it pays to plan holiday dates ahead. Just give us a ring on 0345 646 2711, or email photos with your term dates and we will plan around them.
Do you look at the system first?
Yes. For many sites, photos and a few details are enough, and larger or hidden systems get a visit.
What does TR19 mean?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
Are you accredited?
We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.
What happens if there are not enough access panels?
Sections out of reach are written down on the report, as TR19 expects. New panels can be fitted to reach them in future.
Do I get a certificate for ductwork cleaning?
Every clean comes with a photo report, and a full TR19 clean also comes with a certificate issued through the BESCA Vent Hygiene Elite portal. Keep both in the maintenance log.
What do you need from me for a quote?
Only a few details: where it is, what kind of site, when it’s open and the access. Photos and the last report help too. Then give us a ring on 0345 646 2711 or send us an email.
Looking after it afterwards
Here’s the after-treatment advice, in brief:
- Keep grease filters clean and fitted whenever you cook
- Keep access panels clear of stored items
- Ask us about extra access panels where sections cannot be reached
- Check readings when the menu changes
You will have a recommended date for the next clean, worked out from the grease we found and how long you cook each day, in line with BESA guidance.
Have access panels fitted where sections can’t be reached. It does not stop grease forming, but it stops it building unseen.
Staff cleaning versus specialist work
Logging matters as much as cleaning. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
How we price ductwork cleaning
You’ll get a fixed price before we start. It’s based on:
- Where the site is and how we reach it
- The condition of the system
- The scale of the work
- Whether we need access equipment or extra panels
No two sites are the same, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
Helping us quote
Photos and a few facts are often enough to price the work. Send what you can of the following:
- Photos showing the whole system and its surroundings
- When the site is open and when it’s quiet
- Any access panels or hatches you can see
- Problems your staff have spotted
Need a price for ductwork cleaning? Please call 0345 646 2711 or use the quote form with a few details about the site. We will explain what we’d do and send a fixed quote before you commit to anything.
How the visit works
The visit has three parts: getting the area ready, doing the work and signing it off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and pictures. The middle part takes longest, which takes a shift or more, depending on the length of the runs and the number of access points. The timing of a visit to Bagnor is set by you, and the travel is our side of the planning.
- The duct route is surveyed and every access point found.
- We take grease readings along the route.
- Once the kitchen has closed, we protect the area and open the panels.
- Thick grease is scraped out, then the runs and risers are degreased.
- We close up, re-test, photograph and record anything out of reach.
Getting ready for the visit
- Make sure someone can let us in and lock up afterwards
- Plan for cooking equipment or plant to be off before we arrive
- Dig out any earlier paperwork for the system
How to get a quote
Quoting starts with a diagnosis, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before any work starts.