West Sussex · Canopy and hood cleaning
Canopy Cleaning in Halnaker
Canopy cleaning for Halnaker, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Greasy streaks across the canopy
- Poor capture at the hood
- Grease filters blocking between washes
Honest limits
In fairness, some problems need a different fix:
- A hood that does not cover the cooking line
- A dirty extract fan further along the system
- A fan that cannot pull enough air because it’s worn out
If in doubt, phone us on 0345 646 2711 or email us and we will say what we think before booking.
What the work covers
- Baffle filters
- Island canopies
- Grease gutters
- Wall canopies
- Plenum chambers
- Canopy light fittings
Canopy cleaning in Halnaker, done properly
The canopy is where the extract system breathes in. If it’s coated in grease, everything downstream gets more of it. We start the check-up there, and the treatment is a thorough degrease of the hood, plenum and housing. Common call-outs are for overflowing grease troughs and gutters and poor capture at the hood, on island canopies, wall canopies and canopy light fittings.
Somewhere as small as Halnaker, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Each still has a canopy and duct that collect grease, whatever the size of the place.
It’s worth checking any contractor’s accreditations. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.

- Where
- Halnaker (PO18)
- Wider area
- West Sussex
- Records
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Also near Halnaker
Other services in Halnaker
Kitchen extracts in Halnaker
Look up Halnaker on the FSA’s food hygiene register and you’ll find about 7 cafés, restaurants and staff canteens within roughly a mile and a half of the centre of Halnaker. Each canopy in those kitchens catches grease on the inside of the hood and behind the filters. Halnaker sits within the area of West Sussex Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. In Halnaker, food businesses are inspected by environmental health officers from Chichester council. Extraction counts as kitchen equipment, so its condition can come up on the day. Keeping each certificate and photo report on file helps show the extract is looked after.
If you run catering at a historic house or estate in the area (Goodwood House is about 1.4 miles west), event kitchens in older buildings often have awkward duct runs that need planning. Term dates shape school work: for a school like Boxgrove CofE Primary School, an extract clean fits neatly into a half-term or summer break.
Halnaker is about 3 miles north-east of Chichester, in West Sussex. Sites in Halnaker get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. Halnaker is one of 371 places in West Sussex where we work for canopy cleaning. We also work in Portsmouth, about 16 miles from Halnaker.
We cover every part of PO18 for canopy cleaning and the streets around it. Local streets include The Street, Stame Road and Oakford Park, all of which we cover for canopy cleaning. Nearby, we also carry out canopy cleaning in Boxgrove (1 mile south), Waterbeach (1 mile west), Tangmere (1 mile south), Strettington (1 mile south-west) and Westerton (1 mile west). Further out, we also cover Worthing (14 miles east), Bognor Regis (5 miles south), Chichester (3 miles south-west), Selsey (10 miles south), Littlehampton (9 miles south-east) and Emsworth (10 miles west).
What’s near Halnaker
The closest station to Halnaker is Chichester station, about 3.8 miles south-west of the centre. Well-known places in the area include Chichester Centre (2.9 miles south-west) and The Chichester City Museum (3.4 miles south-west). For a walk, there’s Levin Down.
Looking after it afterwards
Simple habits between visits make a real difference. Our advice:
- Keep every filter in place while cooking
- Check and empty canopy gutters regularly
- Check filters are not leaving gaps
- Tell us when the canopy starts to drip
A full system clean comes with a TR19 certificate from the BESCA Vent Hygiene Elite portal. Where only the canopy is done, the report says so clearly.
A change in how the canopy behaves is worth reporting. More drips or quicker clogging often mean the cleaning interval needs looking at, which a grease thickness test can confirm.
What we are called out for in Halnaker
Moisture in the air mixes with the grease on the canopy. Water vapour condenses on the cooler canopy surfaces and drips, carrying grease with it. Drips onto the cooking line are a common result.
Clients normally contact us when they notice one of these:
- Condensation and grease dripping together
- A canopy flagged at an environmental health inspection
- A canopy that no longer draws the smoke away
- Greasy streaks across the canopy
If you run catering at a healthcare site, such as a hospital like Chichester Centre about 2.9 miles south-west, the extract may need cleaning more often than a part-time kitchen.
What to look for in a quote
- Exactly which parts of the system are covered
- What records you’ll receive afterwards
- Whether the figure could change on the day
- When the next visit should be, and why
How the visit works
Night work is normal for us. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. The visit itself takes a few hours for most canopies. Seeing the system in photos first means the trip to Halnaker can be planned properly.
- We start by checking the canopy and what’s behind its filters.
- We protect everything below once it has cooled.
- Heavy deposits come off by hand, then the surfaces are degreased.
- Plenum, housing, troughs and canopy are all cleaned and checked.
- The canopy is signed off with before and after photos and a next clean date.
Before we arrive
- Let us know when the site is closed or quiet
- Let us know about permits to work or site inductions
- Arrange a key holder or contact on site
Ask for a quote
Want a quote for canopy cleaning? Please phone us on 0345 646 2711 or drop us a line and tell us about the site. We will talk you through the work and give you a fixed quote before you commit to anything.
Read more
What happens if it’s left?
Fresh grease comes off far more easily than old. Heat from the range bakes canopy grease into a hard, dark layer, so the longer it’s left, the longer the clean takes. Equipment tucked in a roof space or outbuilding near Halnaker rarely gets looked at unless someone books it.
We do not list prices on the website, because the cost depends on the site in front of us. For a fixed quote, give us a ring on 0345 646 2711 or drop us a line, and we’ll talk you through it.
Why choose Duct Doctor in Halnaker
- One number for every site across the South East and London
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Fully insured
- Fixed quotes from a survey or pictures
Take a look at how cleaning jobs are priced or how to check a contractor.
What affects the quote in Halnaker
Sites vary more than people expect. What affects the quote:
- How big the system is
- Where the site is and how we reach it
- Site rules, permits and inductions
- Whether it’s a one-off visit or part of a schedule
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will explain each part.
Asking for a quote
A few details help us quote accurately. With your enquiry, please include:
- Your last certificate, test record or report
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Wide photos of the system and the area around it
- Detail shots of panels, filters and grilles
For canopy cleaning in Halnaker, phone us on 0345 646 2711, or email photos. Let us know the site type and the opening hours, plus photos or the previous report if they’re to hand. A fixed quote usually follows within one working day.
What staff can safely do
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
Common questions in Halnaker
Can you get to a site in Halnaker?
Yes. Halnaker is within the area we cover across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Who inspects food businesses in Halnaker?
That’s Chichester council, whose environmental health officers carry out food hygiene inspections in Halnaker. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
Who has the legal duty for fire safety?
It depends on the building. The Fire Safety Order 2005 puts the duty on the responsible person, which can be the employer, the owner, a landlord, an FM or a managing agent.
Is there a survey before the work?
Yes. Photos often do the job, and larger or hidden systems get a visit.
What do you need from me for a quote?
A short description and a few photos, with the address and opening hours. We’ll ask for anything else we need.
How much notice should we give?
Earlier is better, particularly for night and weekend visits. Quotes normally come back within one working day, and there’s a 24/7 line for emergencies.
Do you clean inside the canopy as well as outside?
The whole canopy, inside and out. The plenum behind the filters is included because that is often the dirtiest part.
Do we lose a day’s trading?
Typically not. Out-of-hours visits keep the disruption down. Bigger sites can be done in stages so parts stay in use.