Kent · Air handling unit cleaning
AHU Cleaning in Tilmanstone
We cover Tilmanstone for cleaning of air handling units, including filters, coils, drain trays, fans and internal surfaces. Fixed quotes, work around your opening hours and photo reports as standard.
- Dust built up on fan impellers
- Dirty coils holding back the airflow
- Intake sections clogged with outdoor debris
AHU cleaning in Tilmanstone
Every supply and extract system relies on the air handling unit at its centre: it draws air in, filters it, heats or cools it and pushes it round the ductwork. Whatever builds up inside it travels with that air, which is why we clean the unit itself, not just the ducts. We’re often asked to deal with stale or musty smells from the ventilation and dirty coils holding back the airflow, across internal panels, dampers and louvres and drain trays.
Work in a small place like Tilmanstone starts with agreeing access and timings.
Good records are part of the job. You get a written report with pictures after every visit, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s ready for an insurer, fire officer or EHO.
- Place
- Tilmanstone (CT14)
- Wider area
- Kent
- Records
- Report and pictures after the visit
- Quote
- Fixed quote, normally within a working day
- When we work
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Aftercare tips
So the system stays in good health:
- Make sure condensate is draining away
- Stick to the filter change plan
- File each AHU report in the maintenance log
- Do not ignore odours coming through the grilles
You receive a TR19® certificate and a photo report after the clean. They belong in the plant or maintenance log.
Make sure access doors and panels on the unit open easily. Sections that are awkward to open are the ones that get skipped.
Signs you need AHU cleaning in Tilmanstone
No filter stops everything. What gets through settles on coils, fans and the inside of the casing, a little more each month.
The symptoms we’re asked about most include:
- Dust-coated heating and cooling coils
- Intake sections clogged with outdoor debris
- Dirty filters cutting the airflow
- Plant that needs cleaning after a refit
Healthcare ventilation, from large hospitals like Buckland Hospital (about 5.7 miles south) to small clinics, depends on clean filters, coils and ducts.
Comparing quotes
- Whether the whole system is included, or only the parts that are easy to reach
- What hours they’ll be on site
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether the quote shows VAT
What happens if it’s left?
Tenants, auditors and owners may want proof that the air handling plant is kept clean. Our certificate and photo report give you clear evidence, ready to show anyone who asks. It’s simpler to plan the work at Tilmanstone now than to arrange it in a hurry later.
When the work has to happen, how we reach it and how big the site is can all change the price. We take each of them into account and give you a fixed price before work begins.
Why book with us
- Fixed quotes, typically within one working day
- CHAS and SafeContractor accredited, with ISO 9001
- Survey first, then a fixed quote
- Work around your opening hours, with 24/7 emergency cover
For landlords and multi-site operators
We also work for facilities teams across offices, schools and healthcare across Kent. Larger estates can be phased building by building to keep disruption down.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
Your questions about AHU cleaning in Tilmanstone
Do you work overnight in Tilmanstone?
Yes. We work evenings, overnight and at weekends. It means the site in Tilmanstone keeps running as normal. Tell us your opening hours when you ask for a quote.
Do you offer AHU cleaning in Tilmanstone?
Yes. We work across London and the South East, and Tilmanstone is part of that. Get in touch with the details and we will arrange a survey.
What do you do with what you remove?
Anything we remove is contained as we work and taken away with us, including grease, debris and dirty water. We do not leave it behind.
What types of premises do you cover?
Any site with a kitchen or a ventilation system to look after, from a single café to a large school. We work with hotels, schools, care homes, offices, retail and leisure sites.
What information do you need?
Only a few details: the address, the site type, your opening hours and how we reach the system. Photos and the last report help too. Then call 0345 646 2711 or email us.
How long does an AHU clean take?
Typically the clean takes one overnight shift for many single units, with bigger plant phased. The shutdown is planned to fit, out of hours if needed.
Do you work with multi-site operators?
Yes. You deal with one contact for every site in our area, and visits can be set on a regular cycle.
Do you have insurance?
Yes. We are fully insured, and the details are available on request.
In-house cleaning or a specialist?
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
Fixed quotes for AHU cleaning in Tilmanstone
Sites vary more than people expect. The main factors:
- A single visit or a regular plan
- Access, including roofs, risers and ceiling voids
- Travel, parking and unloading
- The scale of the work
What you pay reflects the actual work. That’s why we survey first, from pictures or on site, and the price is agreed before any work starts.
What to send for a quote
Many jobs can be priced from photos and some basics. Send what you can of the following:
- Your opening hours and when the area is out of use
- Problems your staff have spotted
- The site address and the type of premises
- A few general shots of the system
If you need AHU cleaning in Tilmanstone, ring 0345 646 2711, or email photos. Tell us what kind of premises it is and when it’s open, and send pictures or your last report if you can. A fixed quote normally follows within one working day.
Tilmanstone buildings and their air
About 5.7 miles south of Tilmanstone is Buckland Hospital, the nearest hospital. Hospitals show how much a building can rely on its ventilation, and smaller healthcare sites rely on theirs too.
For buildings in and around Tilmanstone, TR19® Air cleaning starts with an inspection.
Tilmanstone is about 4 miles west of Deal, in Kent. Whether your site is in the middle of Tilmanstone or further out, AHU cleaning is available to all kinds of commercial premises, from small sites to large estates. Tilmanstone is one of 922 places in Kent where we work for AHU cleaning. For sites nearby, see our Maidstone page (33 miles or so).
All of CT14 is within our area for AHU cleaning, from busy streets to back roads. Streets in the area include Upper Street, Vicarage Lane and Chapel Road, and we cover them all for AHU cleaning. Other places close to Tilmanstone include Elvington (2 miles west), Heronden (2 miles north), Chillenden (2 miles north-west), Barfrestone (2 miles west) and Hammill Park (3 miles north). We also work in nearby towns such as Canterbury (10 miles north-west), Margate (12 miles north), Dover (5 miles south), Folkestone (11 miles south-west), Ramsgate (10 miles north-east) and Broadstairs (12 miles north-east).
What’s near Tilmanstone
For rail, the closest station is Shepherds Well station, roughly 3.3 miles south-west. Other landmarks nearby include Deal Castle (4.7 miles east) and Buckland Hospital (5.7 miles south).
Nearby places to Tilmanstone
Also in Tilmanstone
The process
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. On site, the work takes from a few hours for a compact unit to a day or more for a large one. We agree a date with you, plan the drive to Tilmanstone and turn up when the site is quiet.
- We agree a shutdown window that suits the building.
- Before cleaning, each section is photographed.
- Filters, coils and internal surfaces are cleaned from intake to discharge.
- We finish with the fan section and the drain tray.
- We take after pictures and issue the certificate and report.
Preparing for the visit
- Move anything stored near the system
- Let us know about parking and loading
- Tell us about site rules, permits or sign-in
Ask for a quote
For a fixed quote, call 0345 646 2711, or send details by email and tell us the type of site, your opening hours and roughly what the system looks like. A few pictures and your last certificate or report help a lot. We usually come back within one working day.