Kent · Air handling unit cleaning
Stone in Oxney AHU cleaning
Air handling unit cleaning in Stone in Oxney, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- Air handling units never cleaned inside
- Debris and leaves in the fresh air intake
- Filters that are clogged or overdue
AHU cleaning for kitchens and businesses in Stone in Oxney
Where a building in Stone in Oxney has had little more than filter changes, the coils, fan and casing can be carrying far more dirt than anyone has seen. A full AHU clean takes in the whole unit. The work covers supply and extract fans, heating and cooling coils and internal panels, and people most often call us about plant that has been serviced but not cleaned and plant that needs cleaning after a refit.
In rural areas, ventilation units are often in roof voids or outbuildings, where filters and drain trays get forgotten.
It’s worth checking any contractor’s accreditations. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Place
- Stone in Oxney (TN30)
- Region
- Kent
- Records
- Report and photos after the visit
- Price
- A fixed price before work begins
- Hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Why it’s worth doing now in Stone in Oxney
A clean unit feeds cleaner air into the ductwork, so the whole system stays cleaner for longer. That makes the next inspection of a building in Stone in Oxney simpler. Planning a trip to Stone in Oxney ahead is easier for everyone than a rushed one.
Combining work into one visit or one programme can make for a more efficient booking. Mention every system or site you need covered, and you’ll get one fixed quote.
What you get with us
- Fully insured
- Every job surveyed first
- A single point of contact for sites across the South East and London
- Accredited under CHAS and SafeContractor, with ISO 9001
Read how cleaning jobs are priced and our accreditations and certificates.
Places near Stone in Oxney
What else we do in Stone in Oxney
Staff cleaning versus specialist work
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Logging matters as much as cleaning. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
Aftercare tips
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Store the TR19 paperwork where auditors can find it
- Keep inspection doors on the unit in good order
- Watch for drips or damp patches near the plant
- Look at the condensate drain whenever the unit is serviced
The ducts served by the unit may need attention too. A clean unit feeding dirty ducts only solves half the problem, and we can quote for both.
Make sure access doors and panels on the unit open easily. If a section is hard to get into, it tends not to get checked.
Different parts, different methods
Fans and fan sections
The fan moves all of the unit’s air, so dirt on it gets spread around. We clean the impeller, housing and surrounding section.
Rooftop and plant room units
Smaller units in ceiling voids are part of the work as well. We protect the area below before opening them.
Questions from Stone in Oxney
Is Stone in Oxney in your area for AHU cleaning?
Yes, Stone in Oxney is within the area we cover across London and the South East. A fixed quote usually follows within one working day of the survey details.
Will you come out to Stone in Oxney?
Yes, Stone in Oxney is part of our area, however small the site. Photos of the system and directions to the site help us plan the visit.
What’s included in an AHU clean?
The main parts are the filters, coils, drain tray, fan and inside of the casing. The survey confirms what’s in your unit before we quote.
How often do AHUs need cleaning?
TR19® Air takes a risk-based approach, so it depends on inspection rather than a fixed interval. Each report suggests when the unit should next be looked at.
Can you fix a faulty AHU?
The clean includes noting faults, but repairs sit with your maintenance contractor, with the details in the report.
Do you survey before quoting?
Yes. Every job is surveyed first, from your photos and details, or with a visit where needed. Then you get a fixed quote.
Which sectors do you work in?
All kinds of commercial and public premises: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. Work is timed around how each site runs.
Can you set up regular visits?
Yes. Scheduled maintenance plans are part of what we do, with visits at the interval your system needs. Each report recommends when the next visit should be.
AHU cleaning around Stone in Oxney
At about 50 miles from central London, Stone in Oxney sits well inside the area we cover. The visit is fixed around your opening hours, not ours.
An inspection comes first for any ventilation job around Stone in Oxney, so the cleaning matches what’s there. Whether the building is in Stone in Oxney itself or nearby, filters, coils, drain trays and ducts are all part of the work.
Stone in Oxney is about 10 miles south-west of Ashford, in Kent. Sites in Stone in Oxney get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Our area takes in 922 places across Kent, large and small. You can also see our page for Maidstone, roughly 20 miles from Stone in Oxney.
AHU cleaning in TN30 follows the same survey, fixed quote and written report as everywhere else we cover. That includes premises on The Street, Forge Meadow and Church Hill and the roads around them. Neighbouring places we cover for AHU cleaning include Appledore (1 mile north-east), Appledore Heath (2 miles north-east), Stone Corner (2 miles west), Reading Street (2 miles north-west) and The Stocks (2 miles west). Further out, we also cover Ashford (10 miles north-east), Hythe (14 miles east), Tenterden (5 miles north-west), Kennington (12 miles north-east), New Romney (8 miles east) and Staplehurst (14 miles north-west).
Local landmarks in Stone in Oxney
For rail, the closest station is Appledore (Kent) station, about 2.5 miles north-east. A little further out are Smallhythe Place (3.2 miles north-west) and Ypres Tower (4.9 miles south).
How we price AHU cleaning
The price is fixed before any work begins. It’s based on:
- Travel, parking and unloading
- How many systems or sites are involved
- Whether we need access equipment or extra panels
- Site rules, permits and inductions
Working hours, access and the scale of the site all affect the cost. We take each of them into account and give you a fixed price before work begins.
What we need to know
You do not need the technical terms. It helps if you can send:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The postcode and the type of business
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Any access panels or hatches you can see
Want a quote for AHU cleaning? Please ring 0345 646 2711 or send us an email and tell us about the site. We will talk you through the work and give you a fixed quote before anything is booked.
How it works
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool before any work starts, and the area around the work is covered and protected. The work itself takes one overnight shift for many single units, with bigger plant phased. If the van will struggle with a lane or gateway near Stone in Oxney, let us know and we will plan around it.
- We survey the unit from pictures or on site and agree what’s included.
- We arrange the shutdown with your staff and sheet the area.
- Filters, coils, fan section and casing are cleaned in turn.
- Drain trays are cleared and cleaned and the outlet checked.
- A TR19® certificate and photo report follow the clean.
Getting ready for the visit
- Clear loose items from the work area
- Dig out any earlier paperwork for the system
- Arrange a key holder or contact on site
Get a fixed quote
Quotes are quick. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Related advice
Multi-site and managed buildings
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.