Hampshire · Air handling unit cleaning
AHU Cleaning in Stanswood
Looking for AHU cleaning in Stanswood? We diagnose first, fix the price and book the work around your hours, finishing with a written report and pictures.
- Filters that are clogged or overdue
- Units needing a clean before a new tenant or handover
- Air handling units never cleaned inside
What happens if it’s left?
Leave an AHU uncleaned and the dirt doesn’t stay put. It’s carried through the ductwork and out of the grilles, so cleaning the ducts without the unit only goes so far. A planned visit to Stanswood is easier to arrange than an emergency callout.
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.
What you get with us
- Photo reports with every job
- Accredited under CHAS and SafeContractor, with ISO 9001
- Full insurance on every job
- One number for every site across the South East and London
See our cost guide or our accreditations.
About our AHU cleaning in Stanswood
Our AHU cleans for sites in Stanswood cover the parts that collect dirt: the filter section, heating and cooling coils, drain trays, fan and casing. Every clean comes with a TR19® certificate and before and after photos in a report. If you are dealing with rooms that smell stuffy when the system runs and condensate trays that won’t empty, we can put it right, from dampers and louvres, internal panels and drain trays onwards.
For a building in or near Stanswood, access is agreed in advance and the visit is planned around the journey.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Place
- Stanswood (SO45)
- Region
- Hampshire
- Records
- Written report with photos
- Price
- Fixed quote, normally within a working day
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Checked
- 30 October 2026

Stanswood questions
Can you get to a site in Stanswood?
Yes. Villages and rural sites across the South East are part of our work, Stanswood included. Photos of the system and directions to the site help us plan the visit.
Do you work overnight in Stanswood?
Yes, nights and weekends are routine for us. That way a site in Stanswood does not have to lose a day’s trading. Your opening times are the first thing we ask for.
Do you need to switch the unit off?
Yes. Cleaning needs the unit off and isolated, and we time the work to suit the site.
Will you repair the fan or motor?
We clean the unit and flag faults rather than repair them, with pictures where it helps.
Can you clean the ducts connected to the AHU?
Yes. Ventilation ductwork cleaning to TR19® Air is part of what we do. It’s often worth doing both at once, and we can survey both on the same visit.
How much notice do you need?
Book as early as you can for planned work, particularly if your next visit is nearly due. Emergencies are different, because our line is open 24/7.
Can you set up regular visits?
Yes. Scheduled maintenance plans are part of what we do, set at the interval the system needs. Each report recommends when the next visit should be.
Where does the waste go?
We take it away when we go. During the work, it’s contained so the area stays clean.
When to call us in Stanswood
No filter stops everything. What gets through settles on coils, fans and the inside of the casing, building up layer by layer.
Clients typically contact us after spotting one of these:
- Air handling units due a clean after building work
- Drain trays holding standing water
- Debris and leaves in the fresh air intake
- Dirty fans and fan housings
Coldeast, about 5.4 miles north-east, is the nearest hospital to Stanswood, and healthcare sites of every size need their supply air kept clean.
What your quote should include
- Whether the work can be done while the site is closed
- Whether the price is fixed
- Whether the whole system is included, or only the parts that are easy to reach
- Whether a written report and photos are included
Honest limits
Not every problem is solved by AHU cleaning, and we’d rather say so up front. It does not solve:
- Building management system faults
- Dirty ducts beyond the unit itself
- Mechanical faults with motors, belts or bearings
If you are not sure, just call 0345 646 2711, or email photos and we’ll give you a straight answer before booking.
What we work on in Stanswood
- Internal panels
- Supply and extract fans
- Heating and cooling coils
- Drain trays
- Filter sections
- Dampers and louvres
Ventilation in Stanswood buildings
The nearest hospital to Stanswood is Coldeast, about 5.4 miles north-east. Healthcare buildings depend on clean supply and extract ventilation, and the same applies to surgeries, clinics and care homes.
An inspection comes first for any ventilation job around Stanswood, so the cleaning matches what’s there.
Stanswood is about 3 miles north-west of Cowes, in Hampshire. Whether your site is in the middle of Stanswood or further out, we cover AHU cleaning for every kind of premises, from small sites to large estates. Across Hampshire, we cover 683 places, and Stanswood is one of them. For sites nearby, see our Southampton page (8 miles or so).
Every address in SO45 is within our area for AHU cleaning, from busy streets to back roads. We also cover the places around Stanswood: Sprat's Down (1 mile north), Calshot (1 mile north-east), Hillhead (1 mile north-east), Langley (1 mile west) and Blackfield (2 miles north-west). We also work in nearby towns such as Gosport (8 miles east), Eastleigh (11 miles north), Fareham (7 miles north-east), Totton (11 miles north-west), Chandler's Ford (13 miles north) and Hedge End (8 miles north).
Landmarks near Stanswood
For rail, the closest station is Hamble station, roughly 4.8 miles north. Other landmarks nearby include Coldeast (5.4 miles north-east) and Calshot Castle (2 miles north-east). For a walk, there’s Mill Hill and Mercury Marshes.
What we do, step by step
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool first, and the area around the work is covered and protected. The work itself takes from a few hours for a compact unit to a day or more for a large one. Seeing the system in pictures first means the trip to Stanswood can be planned properly.
- First we agree when the unit can be switched off, including evenings or weekends.
- We take before photos of each section of the unit.
- Filters, coils and internal surfaces are cleaned from intake to discharge.
- We finish with the fan section and the drain tray.
- We take after pictures and issue the certificate and report.
Getting ready for the visit
- Mention any parking or loading restrictions
- Name a contact who can let us in at the agreed time
- Move anything stored near the system
Ask for a quote
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.
Related advice
Looking after it afterwards
Results last longer with the right care. Here’s what we suggest:
- Do not store bins or materials near the intake
- Check the drain tray is emptying during routine visits
- Flag stale or damp smells in the supply air
- Note any water around the unit or leaks below it
If the ductwork hasn’t been cleaned, consider it next. A clean unit feeding dirty ducts only solves half the problem, and we can survey both.
Do not let leaves, litter or stored materials build up near the fresh air intake. What’s near the intake ends up in the unit.
How we price AHU cleaning
The survey tells us what the work involves. The main factors are:
- The scale of the work
- Whether it’s a one-off visit or part of a schedule
- Working hours and out-of-hours timing
- The number of sites or systems
A single site or a whole portfolio, the quote is built the same way: the work involved, the access and the timing. You will have a fixed price before any work starts.
What we need to know
Photos let us diagnose from a distance. The most useful are:
- The site address and the type of premises
- The times we could work without disrupting the site
- Detail shots of panels, filters and grilles
- The roof, plant room or outside wall the system runs to
For AHU cleaning in Stanswood, call us on 0345 646 2711, or send details by email. Tell us what kind of premises it is and when it’s open, and send pictures or your last report if you can. We typically send a fixed quote within one working day.
Nearby places to Stanswood
Also in Stanswood
For landlords and multi-site operators
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
When the building owner and the occupier are different, the lease normally sets out who maintains what. We are happy to deal with either side, and the report can go to both.