Hampshire · Air handling unit cleaning
Micheldever Station AHU cleaning
For cleaning of air handling units, including filters, coils, drain trays, fans and internal surfaces in Micheldever Station, one call is all it takes: survey, fixed quote, work and sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Drain trays holding standing water
- Air handling units never cleaned inside
- Dirty fans and fan housings
Micheldever Station questions
Is AHU cleaning available in Micheldever Station?
Yes. We work across London and the South East, and Micheldever Station is part of that. A fixed quote usually follows within one working day of the survey details.
Do you work at weekends in Micheldever Station?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. When you call us on 0345 646 2711 or send us an email, mention when the site is quiet.
How much notice do you need?
Earlier is better, especially for out-of-hours work. We typically quote within one working day, and emergencies are covered by our 24/7 line.
What types of premises do you cover?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
How do you keep the site clean during the work?
With sheeting and covers, before anything else happens. The work is kept contained and clean down when we finish.
How long does an AHU clean take?
As a guide, it takes from a few hours for a compact unit to a day or more for a large one. The shutdown is planned to fit, including evenings or weekends.
Is a quote from photos possible?
Usually, yes. Send wide shots, close-ups of any access panels and anything that worries you, and a fixed quote typically follows within one working day. If pictures are not enough, we will survey first.
What happens if you cannot reach some of it?
We record them on the report, with photos where possible, and we tell you what would make it reachable, such as extra access panels in ductwork.
AHU cleaning in Micheldever Station, done properly
Coils are where a lot of the dirt ends up. A coated coil restricts airflow and makes the unit work harder. We clean coils with methods suited to their condition, taking care not to damage the fins. The work covers dampers and louvres, heating and cooling coils and supply and extract fans, and the jobs we see most are plant that needs cleaning after a refit and coils clogged with dust and debris.
Work in a small place like Micheldever Station starts with agreeing access and timings.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Place
- Micheldever Station (SO21)
- Wider area
- Hampshire
- Records
- Report and pictures after the visit
- Quotes
- A fixed price before any work starts
- Hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Staff cleaning versus specialist work
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, next to our reports.
Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.
Landlords, agents and facilities managers
From a single site to a large estate, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with photos.
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party, and the report can go to both.
What a clean will not put right
We’ll always give you a straight diagnosis, so here’s what this work can’t put right:
- Building management system faults
- Ventilation that was badly designed in the first place
- Coils that are corroded or leaking and need replacing
If in doubt, call 0345 646 2711, or send details by email and we’ll say what we think.
Parts of the system we cover
- Supply and extract fans
- Internal panels
- Drain trays
- Dampers and louvres
- Heating and cooling coils
- Filter sections
AHU cleaning around Micheldever Station
Micheldever Station is about 55 miles from central London, well within the area we cover across London and the South East. Visits are booked around your hours, evenings and weekends included.
An inspection comes first for any ventilation job around Micheldever Station, so the cleaning matches what’s there. Whether the building is in Micheldever Station itself or nearby, filters, coils, drain trays and ducts are all part of the work.
Micheldever Station is about 8 miles north of Hyde, in Hampshire. Every kind of commercial site in Micheldever Station, AHU cleaning is something we can help with. Visits can be booked for evenings, overnight or weekends so the site keeps running. 683 places in Hampshire are on our list, large and small. We also work in Southampton, about 19 miles from Micheldever Station.
We cover every part of SO21 for AHU cleaning and the roads nearby. We cover sites on Andover Road, Overton Road and Ellis Drive and nearby roads. If your site is just outside Micheldever Station, we cover Northbrook (2 miles south), Micheldever (2 miles south), East Stratton (3 miles south-east), Hunton (3 miles south-west) and Stoke Charity (3 miles south-west). Within a short drive, we also cover Basingstoke (9 miles north-east), Winchester (9 miles south), Eastleigh (15 miles south), Andover (10 miles west), Chandler's Ford (15 miles south) and Alton (13 miles east).
Around Micheldever Station
Locally, jobs take us to businesses close to The Dove Inn, among other places. For rail, the closest station is Overton station, about 5 miles north.
The process
Everything the job needs comes with us, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. On site, the work takes anything from half a day for one small unit to several shifts for a plant room full of them. If you can send photos, we can arrive in Micheldever Station knowing what to expect.
- We survey the unit from pictures or on site and agree what’s included.
- With your site team, the unit is switched off and isolated, then the area around it protected.
- Filters, coils, fan section and casing are cleaned in turn.
- We clean out the drain tray and make sure it drains.
- A TR19® certificate and photo report follow the clean.
Getting ready for the visit
- Dig out any earlier paperwork for the system
- Arrange a key holder or contact on site
- Let us know about parking and loading
Getting a quote
There’s no standard price list, because no two systems are the same. We look at your system first, from pictures or on a visit, and then send you a fixed quote. To get going, phone us on 0345 646 2711 or drop us a line.
Read more
Aftercare tips
Aftercare is simple, and it makes the next visit easier:
- Make sure condensate is draining away
- Plan the next inspection before the last report gets filed away
- Watch for drips or damp patches near the plant
- Flag stale or damp smells in the supply air
Once the clean is done, we send a TR19® certificate and a report with before and after photos. Keep both with the building’s maintenance records.
Change or clean filters on time. Overloaded filters let more dirt through to the coils and fan.
Different parts, different methods
Fans and fan sections
The fan section is cleaned with the unit switched off and isolated with your site team.
Rooftop and plant room units
Many AHUs sit on roofs or in plant rooms with limited access. We plan safe access as part of the survey, before we quote.
Towns and villages near Micheldever Station
What else we do in Micheldever Station
What affects the cost of AHU cleaning
Sites vary more than people expect. What affects the quote:
- When the work can happen, such as evenings, overnight or weekends
- The scale of the work
- How easy every part is to reach
- Whether several sites go on one quote
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we’ll explain each part.
Helping us quote
What to send for a quote:
- The site address and the type of premises
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The times we could work without disrupting the site
- Where the plant sits or the system leaves the building, such as a roof or outside wall
The quickest way to a quote is to send pictures: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.