Hampshire · Air handling unit cleaning

AHU Cleaning in Cole Henley

For air handling unit cleaning in Cole Henley, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.

  • Dust built up on fan impellers
  • Air handling units never cleaned inside
  • Dust-coated heating and cooling coils

Book AHU cleaning in Cole Henley

AHU cleaning in Cole Henley

No two plant rooms are the same, whether it’s a compact unit in a ceiling void or a big unit on the roof. Every job starts with a survey, from photos or on site, followed by a fixed quote before any cleaning starts. The work covers dampers and louvres, drain trays and supply and extract fans, and common reasons people get in touch are units needing a clean before a new tenant or handover and blocked condensate drains and slimy trays.

Somewhere as small as Cole Henley, ducted ventilation is normally limited to a school, a care home, a surgery or a converted business building, wherever there is one, but where it’s fitted, it needs the same inspection and cleaning as anywhere.

Every visit ends with a written report and photos, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.

Location
Cole Henley (RG28)
Wider area
Hampshire
Reporting
Written report with photos
Price
Fixed quote, usually within a working day
When we work
Nights, weekends or holidays to suit you
Call
0345 646 2711
Page updated
30 October 2026
Before and after view down the inside of a rectangular extract duct

What the work involves, part by part

Heating and cooling coils

Because cooling coils run wet, the dirt on them tends to cling. We clean the coil and the tray beneath it together.

Drain trays

Drain trays can rust and leak over time. We record their condition with pictures so you can decide on any repairs.

What we’re called out for in Cole Henley

Air handling units are normally tucked away on roofs, in plant rooms or above ceilings, so they’re easy to forget about. Months can pass without anyone looking inside.

Common reasons sites call us are:

  • Dirty coils holding back the airflow
  • Plant that has been serviced but not cleaned
  • Dirty filters cutting the airflow
  • Stale or musty smells from the ventilation

Ventilation work in and around Cole Henley is risk-based: inspect, then clean what needs it.

Questions to ask before you book

  • Proof of accreditation you can verify
  • What happens if part of the system cannot be accessed
  • What paperwork you get at the end
  • Whether the quote is based on a survey or pictures

How to choose an extract cleaning contractor

FAQs for Cole Henley

Will you come out to Cole Henley?

Yes. Cole Henley is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.

Do you offer AHU cleaning in Cole Henley?

Yes, Cole Henley is within the area we cover across London and the South East. To start, phone us on 0345 646 2711 or drop us a line with a few pictures of the system.

Are you fully insured?

Yes. Duct Doctor is fully insured, and we can share the details when you need them.

How do you keep the site clean during the work?

We cover floors and nearby surfaces with sheeting before we start, and anything we remove is contained. Before we leave, we tidy up and clean down.

What should I send you?

A short description and a few pictures plus the address and your hours. We’ll ask for anything else we need.

Do you give a certificate after the clean?

Yes. A TR19® certificate and photo report are sent after the clean, with any faults we noticed.

What happens to the waste?

We take it away at the end of the visit. During the work, it’s contained to keep the area clean.

Do you work with multi-site operators?

Yes. Our area covers London and the South East, so sites at different addresses can be planned together as one programme. Each site gets its own report and photos.

Multi-site and managed buildings

Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept on a regular cycle.

We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.

Between visits

Once we’ve finished, these simple steps help:

  • Diary the inspection date recommended in the report
  • Stick to the filter change plan
  • Report stiff or damaged access doors
  • Report musty smells from the vents right away

Keep filter changes on schedule between cleans, as that does more than anything to keep the unit clean. Record each change in the maintenance log.

Regular inspection under TR19® Air shows when cleaning is due, rather than waiting for a problem.

The process

A visit follows the same order every time: protect the area, isolate whatever needs isolating, do the work, tidy up and leave you the report. On site, the work takes half a day to a full day per unit, with large plant planned over several shifts. Pictures of the system and its access let us plan the work in Cole Henley before we set off.

  1. The survey covers the unit, its access and how it can be shut down.
  2. We sheet the area and the unit is isolated.
  3. Each section is cleaned of dust, debris and slime.
  4. We clean the coils and clear the tray and drain.
  5. The unit is closed up and handed back, with a report to follow.

Getting ready for the visit

  • Make sure someone can let us in and lock up afterwards
  • Mention any sign-in, permit or induction we need
  • Let us know when the site is closed or quiet

Ask for a quote

Every quote begins with a look at the system, from your pictures and details or, where that isn’t enough, a survey on site. Then we send a fixed price, before we start.

Get a quick quote

Advice

AHU cleaning in Cole Henley: local notes

Cole Henley is about 56 miles from central London, well within the area we cover across London and the South East. The visit is fixed around your opening hours, not ours.

School buildings such as Testbourne Community School are normally done in the holidays, so classrooms are not disturbed.

Cole Henley is about 7 miles north-east of Andover, in Hampshire. From the centre of Cole Henley to the outskirts, we cover AHU cleaning for every kind of premises, from small sites to large estates. 683 places in Hampshire are on our list, from busy centres to quieter spots. You can also see our page for Reading, roughly 20 miles from Cole Henley.

We work across RG28 for AHU cleaning and the roads nearby. Neighbouring places we cover for AHU cleaning include Wells-in-the-Field (2 miles south), Freefolk (2 miles south-east), Whitchurch (2 miles south), Wadwick (3 miles north-west) and St Mary Bourne (3 miles west). We also work in nearby towns such as Basingstoke (10 miles east), Winchester (14 miles south), Andover (7 miles south-west), Tadley (10 miles north-east), Hyde (13 miles south) and Popley (11 miles east).

What’s near Cole Henley

For rail, the closest station is Whitchurch (Hampshire) station, about 1.4 miles south of the centre. Not far away are Ladle Hill.

Map of Cole Henley © OpenStreetMap contributors

Staff cleaning versus specialist work

Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. That’s our job.

Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, next to our reports.

How we price AHU cleaning

We quote each job individually. These are the things that affect it:

  • The times the site is available
  • Whether it’s a one-off visit or part of a schedule
  • How easy every part is to reach
  • Whether several sites go on one quote

Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, which can make the next visit longer. If you’re unsure, ring 0345 646 2711 or use the quote form and we’ll give you an honest view and a fixed quote.

Asking for a quote

Before you ask for a quote, gather:

  • The site address and the type of premises
  • Any previous report or certificate
  • When the site is open and when it’s quiet
  • Photos showing the whole system and its surroundings

The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London