Oxfordshire · Air handling unit cleaning
Balscote AHU cleaning
AHU cleaning for Balscote, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Drain trays holding standing water
- Debris and leaves in the fresh air intake
- Filters that are clogged or overdue
Why it’s worth doing now in Balscote
Dirty coils and fans make the unit strain to move the same air. That means more wear on the motor and rooms that feel less fresh, and a clean on your terms beats a breakdown on nobody’s. It’s simpler to plan the work at Balscote now than to arrange it in a hurry later.
A single site or a whole portfolio, the quote is built the same way: the work involved, the access and the timing. The price is fixed before we start.
Why us?
- Work around your opening hours, with 24/7 emergency cover
- One contact for all your sites in London and the South East
- Full insurance on every job
- Fixed quotes from a survey or photos
Read our cost guide and how to check a contractor.
About our AHU cleaning in Balscote
Heating and cooling coils trap dust that gets past the filters. Dirt on the fins holds back air and makes the unit work harder to do the same job. Coils are cleaned carefully, with methods chosen so the fins are not flattened. If you have dirty coils holding back the airflow and air handling units with blocked filters, we can help.
Somewhere as small as Balscote, ducted ventilation is normally limited to a school, a care home, a surgery or a converted business building, wherever there is one, but those that do need it inspected and cleaned like any other.
We’ve been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.
- Where
- Balscote (OX15)
- Wider area
- Oxfordshire
- Records
- Written report with photos
- Price
- A fixed quote up front
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
What affects the cost of AHU cleaning
A fixed price needs a few facts first. We look at:
- Access, including roofs, risers and ceiling voids
- The number of sites or systems
- Whether it’s a one-off visit or part of a schedule
- The scale of the work
Working hours, access and the scale of the site can all change the price. Each of those is built into the quote and give you a fixed price before any work starts.
What to send for a quote
When you call or email, these details help:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Close-ups of filters, grilles, hatches or access panels
- Your last certificate, test record or report
- A few general shots of the system
There’s no standard price list, because every site is different. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To start, ring 0345 646 2711, or email photos.
In-house cleaning or a specialist?
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
How the job changes from site to site
Filters
Filters are the first line of defence in the unit. As part of the clean, filters are checked and cleaned or replaced as agreed, and the housing around them is cleaned too.
Fans and fan sections
Before the fan is touched, the unit is shut down and made safe with your site team.
Common questions in Balscote
Can the work in Balscote be done at night or at weekends?
Yes. We work evenings, overnight and at weekends. That way a site in Balscote doesn’t have to lose a day’s trading. Let us know the hours you’re closed and we’ll book within them.
Do you cover smaller places like Balscote?
Yes. Balscote is within the area we cover across London and the South East. The journey is planned ahead, so a few details about the route help.
What happens to the waste?
It’s contained and taken away. Grease, debris and waste water are collected as the work goes on, so it does not spread.
Do you give a certificate after the clean?
Yes, both a certificate and a report with photos. It includes a recommended date for the next check.
How long does an AHU clean take?
As a guide, it takes anything from half a day for one small unit to several shifts for a plant room full of them. We plan the shutdown around that, including evenings or weekends.
Which sectors do you work in?
Any site with a kitchen or a ventilation system to look after, from a single café to a large school. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
Do you have a 24/7 line?
Yes. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we’ll advise on what to do next.
What does TR19 mean?
TR19® is the BESA specification for keeping ventilation systems clean. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Towns and villages near Balscote
What else we do in Balscote
Ventilation in Balscote buildings
For Balscote, the closest hospital is Horton General Hospital, roughly 4.2 miles east. If you run a surgery, clinic or care home, your ventilation deserves the same care as a hospital’s, on a smaller scale.
For buildings in and around Balscote, TR19® Air cleaning starts with an inspection. Healthcare buildings such as Horton General Hospital, about 4.2 miles east, depend on their ventilation; if you manage a surgery, clinic or care home near Balscote, yours matters too.
Balscote is about 4 miles west of Banbury, in Oxfordshire. From the centre of Balscote to the outskirts, AHU cleaning is available to all kinds of commercial premises, from small sites to large estates. Balscote is one of 443 towns, villages and districts in Oxfordshire we cover for AHU cleaning. Our Oxford page covers sites nearby, about 24 miles away.
Our technicians cover all of OX15 for AHU cleaning and the streets around it. Nearby, we also carry out AHU cleaning in Shutford (1 mile south), Alkerton (1 mile north-west), Shenington (1 mile north-west), Epwell (2 miles west) and Tadmarton (2 miles south). Further out, we also cover Banbury (4 miles east), Chipping Norton (10 miles south-west), Neithrop (3 miles east), Grimsbury (5 miles east), Ruscote (3 miles east) and Bloxham (4 miles south-east).
Landmarks near Balscote
We work in commercial kitchens and buildings around The Butchers Arms Public House and the streets around them. For rail, the closest station is Banbury station, roughly 4.5 miles east. A little further out are Horton General Hospital (4.2 miles east) and W. O. Bentley Memorial Foundation (1.1 miles north-east). Not far away are Woodford Bottom and Lamb's Pool and Edge Hill.
Looking after it afterwards
A little care between visits keeps the system in better shape. Our advice:
- Don’t ignore odours coming through the grilles
- Don’t store bins or materials near the intake
- Note any water around the unit or leaks below it
- Keep inspection doors on the unit in good order
Stick to the filter change schedule, as that does more than anything to keep the unit clean. Log every change so it’s easy to see when the next is due.
Keep the area around the intake clear. Anything around the intake is likely to be drawn in.
What AHU cleaning can’t fix
An honest diagnosis matters more to us than a booking, so here’s what AHU cleaning won’t do:
- Dirty ducts beyond the unit itself
- Leaking heating or cooling coils
- Building management system faults
If you’re not sure, just ring 0345 646 2711 or drop us a line and we will give you a straight answer.
Parts of the system we cover
- Supply and extract fans
- Drain trays
- Heating and cooling coils
- Filter sections
- Dampers and louvres
- Internal panels
What we do, step by step
We’re used to working while the site is closed. Evenings, nights and weekends are when much of our work happens, so a kitchen or building can carry on as usual the next day. On site, the work takes anything from half a day for one small unit to several shifts for a plant room full of them. Rural roads and tight entrances are worth telling us about before a visit to Balscote.
- First we agree when the unit can be switched off, including evenings or weekends.
- We take before photos of each section of the unit.
- Filters, coils and internal surfaces are cleaned from intake to discharge.
- The fan and drain tray are cleaned and the drain checked.
- We take after pictures and issue the certificate and report.
Getting ready for the visit
- Allow time for equipment near the work to be turned off and cool down
- Name a contact who can let us in at the agreed time
- Tell us where we can park and unload
Ask for a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before any work starts.