Essex · TR19 inspections and grease testing
TR19 inspections and grease testing in Stanford Rivers, Essex
Professional TR19 inspection in and around Stanford Rivers, booked around your opening hours and signed off in writing with pictures.
- Surveys needed before quoting a full clean
- Extracts that have never been grease tested
- Parts of the system left out of past cleans
How we handle TR19 inspection in Stanford Rivers
A pre-clean survey is the diagnosis, and the clean is the treatment. Readings, photos and notes on access are gathered from end to end, so the quote and the clean fit the real system. Typical jobs include sites with gaps in their extract records and systems cleaned on a calendar with no measurements, across access surveys, pre-clean surveys and wet film thickness tests.
Somewhere as small as Stanford Rivers, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
The paperwork matters as much as the work. You get a written report with photos after every visit, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s ready for an insurer, fire officer or EHO.
- Where
- Stanford Rivers (CM5)
- Wider area
- Essex
- Records
- TR19® certificate and photo report
- Quote
- Fixed quote, normally within a working day
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Common questions in Stanford Rivers
Do you work at weekends in Stanford Rivers?
Yes, out-of-hours work is a big part of what we do. That way a site in Stanford Rivers does not have to lose a day’s trading. Your opening times are the first thing we ask for.
Do you cover smaller places like Stanford Rivers?
Yes. Stanford Rivers is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
What do you do with what you remove?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. We don’t leave it behind.
What should I send you?
The site address, the type of premises and your opening hours, along with a few photos and any previous report.
Which kinds of sites do you work on?
Commercial premises of every kind: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. Work is timed around how each site runs.
Why survey before a clean?
We check the layout, the grease levels and the access, so the clean goes to plan. Any access problems are flagged so they can be sorted first.
How do you measure grease in a kitchen extract?
The Wet Film Thickness Test (WFTT) and Deposit Thickness Test (DTT) measure how thick the grease is at a given point. We take readings at set points from canopy to fan.
What is post-clean verification?
A post-clean check records grease readings and photos after the work, for our cleans and other firms’ alike.
What we are called out for in Stanford Rivers
Menus, opening hours and cooking styles change over time, and more frying or longer hours mean more grease. A cleaning interval set years ago may no longer fit.
Any of these means the system needs a check-up:
- Confirming a clean reached the whole system
- Uncertainty over how often to clean
- Ductwork where grease may be over the TR19 limits
- Parts of the system left out of past cleans
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; St. Margaret's Hospital is the nearest hospital to Stanford Rivers, about 4.2 miles west.
Comparing quotes
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether they recommend a next date
- Whether a written report and pictures are included
- Whether the price is fixed
What happens on the day
Every visit runs to the same pattern: sheeting and protection first, make the system safe, do the work, clear away and leave you the report. On site, the work takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. The timing of a visit to Stanford Rivers is set by you, and the travel is our side of the planning.
- First we book a time that will not disrupt cooking.
- We look over the canopy, plenum, ducts, fan and discharge.
- Grease readings are taken at set points using WFTT or DTT.
- We photograph the test points and record any sections we can’t reach.
- You get a report with readings, photos and recommendations.
Preparing for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Dig out any earlier paperwork for the system
- Clear loose items from the work area
How to get a quote
For a fixed quote, ring 0345 646 2711, or send details by email with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You’ll usually have a quote within one working day.
Advice
Honest limits
We’d rather tell you now than book work that will not help, so here are the limits:
- Parts of the duct nobody can reach yet
- Fan breakdowns, which need a repair visit
- The legal duty, which stays with the responsible person
If in doubt, call us on 0345 646 2711 or email us and we will say what we think.
What the work covers
- Post-clean checks
- Insurer audits
- Deposit thickness tests
- Access surveys
- Wet film thickness tests
- Pre-clean surveys
In-house cleaning or a specialist?
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Kitchen extracts in Stanford Rivers
The FSA’s data shows about 4 bars, pubs and nightclubs registered within about 1.5 miles of central Stanford Rivers. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. The fire and rescue service for Stanford Rivers is Essex County Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. In Stanford Rivers, food businesses are inspected by environmental health officers from Epping Forest council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Keeping each certificate and photo report on file helps show the extract is looked after.
Term dates shape school work: for a school like Chipping Ongar Primary School, an extract clean fits neatly into a half-term or summer break. Volunteers running a hall kitchen near Church of St Margaret of Antioch, or anywhere in Stanford Rivers, may not know when the extract was last cleaned, and a grease test settles it.
Stanford Rivers is about 6 miles north-west of Brentwood, in Essex. If you need TR19 inspection in Stanford Rivers, please call 0345 646 2711, or send details by email for a fixed quote. We work across South East England and London, Stanford Rivers included. Stanford Rivers is one of 644 places in Essex where we work for commercial clients. Chelmsford is in our area too, about 12 miles from Stanford Rivers.
We work across CM5 for TR19 inspection and the roads nearby. You’ll find streets such as Mutton Row and School Road, all of which we cover for TR19 inspection. Other places close to Stanford Rivers include Little End (1 mile south-east), Hare Street (1 mile south), Clatterford End (1 mile north-west), Marden Ash (1 mile north-east) and Navestock Heath (2 miles south). Within a short drive, we also cover Chelmsford (12 miles east), Basildon (13 miles south-east), Harlow (7 miles north-west), Brentwood (6 miles south-east), Billericay (10 miles south-east) and Loughton (7 miles south-west).
What’s near Stanford Rivers
In Stanford Rivers, that means kitchens and buildings near The Woodman Public House and The Ongar Academy, among other places. A little further out are St. Margaret's Hospital (4.2 miles west). Not far away are Gernon Bushes.
Why deal with it now?
Don’t wait for an EHO visit or insurance renewal to find gaps in your extract records. A recent inspection report means you are ready when asked. It’s worth booking a check, because nobody sees inside a duct day to day.
When the work has to happen, how we reach it and how big the site is can all change the price. We take each of them into account, and the price is fixed before we start.
What you get with us
- Fully insured
- One contact for all your sites in London and the South East
- A fixed price before any work starts
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
For landlords and multi-site operators
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.
We also work for facilities teams across offices, schools and healthcare in Stanford Rivers and across Essex. Work can be phased by floor, building or site to keep disruption down.
Places near Stanford Rivers
What else we do in Stanford Rivers
What affects the quote in Stanford Rivers
Every site gets its own quote. This is what makes a difference:
- The condition of the system
- The number of sites or systems
- Working hours and out-of-hours timing
- Site requirements such as sign-in and permits
Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
Asking for a quote
A few details help us quote accurately. With your enquiry, please include:
- The postcode and the type of business
- Any previous report or certificate
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
Every quote begins with a look at the system, from your photos and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work, before any work starts.