Hertfordshire · TR19 inspections and grease testing
TR19 inspections and grease testing in Stanborough, Hertfordshire
TR19 inspection across Stanborough and nearby, booked around your opening hours and signed off in writing with pictures.
- Extracts that may be over the 200 micron mean
- Cleaning intervals that may not suit the kitchen
- Missing access panels found on survey
Staff cleaning versus specialist work
Staff cleaning does not replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you can’t see still need a specialist at the right interval.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and give you a fixed quote.
How we handle TR19 inspection in Stanborough
A fixed schedule does not always match how a kitchen really cooks. Some kitchens build up grease faster than the minimum intervals assume, and only measurement shows it. We give your risk assessment measured figures rather than guesses. Typical jobs include heavy grease suspected in the plenum or ducts and extracts that have never been grease tested, across post-clean checks, pre-clean surveys and insurer audits.
Somewhere as small as Stanborough, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Each still has a canopy and duct that collect grease, whatever the size of the place.
We are CHAS and SafeContractor accredited, we hold ISO 9001 and we are fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Place
- Stanborough (AL8)
- Region
- Hertfordshire
- Paperwork
- TR19® certificate and photo report
- Price
- Fixed quote, normally within a working day
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Managing agents and facilities teams in Stanborough
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so records stay tidy.
What a clean will not put right
A few issues sit outside what this work can do:
- Design faults in the extract system
- Fire safety duties beyond the extract system
- Hidden runs that need access panels first
If in doubt, give us a ring on 0345 646 2711, or email photos and we will say what we think before booking.
What the work covers
- Deposit thickness tests
- Pre-clean surveys
- Wet film thickness tests
- Access surveys
- Post-clean checks
- Insurer audits
TR19 inspection around Stanborough
The FSA’s data shows about 10 pubs, bars and clubs and about 3 hotels, B&Bs and guest houses registered across Stanborough and its immediate surroundings (about a mile and a half). Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. Kitchens in Stanborough get their food hygiene inspections from Welwyn Hatfield council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Before-and-after pictures from each clean are a simple way to show the extract is in hand. The fire and rescue service for Stanborough is Hertfordshire Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract.
Where a hall near Church of St John the Evangelist, or anywhere in Stanborough, hosts lunch clubs or events, its extract gathers grease just as a café’s does. Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Stanborough is Queen Elizabeth II Hospital, about 1.8 miles east.
Stanborough is about 2 miles south-west of Welwyn Garden City, in Hertfordshire. Sites in Stanborough get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. Stanborough is one of 381 towns, villages and districts in Hertfordshire we cover for TR19 inspection. We also work in London, about 21 miles from Stanborough.
Postcode districts we cover here for TR19 inspection: AL8. Whether your site is on New Road, Brocket Road and Great North Road or a nearby road, our technicians can take on the work. We also cover Lemsford (1 mile north), Hatfield (2 miles south), Cooper's Green (2 miles south-west), Coleman Green (2 miles west) and Smallford (3 miles south-west). Larger places within reach include Watford (11 miles south-west), Hemel Hempstead (10 miles west), Stevenage (9 miles north), St Albans (5 miles south-west), Harpenden (6 miles west) and Hitchin (11 miles north).
What’s near Stanborough
Typical jobs here are in premises near The East pub, Stanborough Park and Applecroft School. Stanborough’s nearest station is Welwyn Garden City station, roughly 1.4 miles north-east of the centre. Nearby you will also find The Bunker at Hatfield Police Station (1.6 miles south) and Howard Centre (1.4 miles north-east). Green spaces nearby include Lemsford Springs.
Nearby places to Stanborough
Also in Stanborough
Common problems we fix in Stanborough
Menus, opening hours and cooking styles change over time, and more frying or longer hours mean more grease. The old cleaning schedule may not match the kitchen any more.
The symptoms we’re asked about most include:
- Systems cleaned on a calendar with no measurements
- Ductwork where grease may be over the TR19 limits
- Cleaning intervals that may not suit the kitchen
- Systems that need surveying before cleaning
Historic houses near Stanborough, such as Hatfield House about 2 miles south-east, are a reminder that older buildings with event kitchens can have long, awkward duct routes.
What to look for in a quote
- How they set the interval to the next visit
- What records you will receive afterwards
- Which accreditations they hold, and whether you can check them
- Whether the quote shows VAT
What we do, step by step
The first job on site is protection: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. It takes around an hour or two per canopy and duct system, and we clear up before we go. Seeing the system in pictures first means the trip to Stanborough can be planned properly.
- First we look at the system’s cleaning history, if there is one.
- The layout is traced from the canopy to the discharge.
- Access panels are located and any missing ones noted.
- We measure the grease and photograph each point.
- We report back with readings and a fixed quote.
Before we arrive
- Clear the space around the work
- Mention any locked doors, roof access or ceiling voids
- Arrange a key holder or contact on site
Get a fixed quote
Need a price for TR19 inspection? Please call 0345 646 2711, or send details by email with a few details about the site. We will talk you through the work and send you a fixed quote before anything is booked.
Advice
How we price TR19 inspection
The survey tells us what the work involves. The main factors are:
- The scale of the work
- Parking and loading at the site
- Any permits to work or inductions
- What state the system is in
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, which can make the next visit longer. If you are not sure what’s needed, phone us on 0345 646 2711 or use the quote form for straight advice and a fixed quote.
What to send for a quote
We can often survey from photos. The most useful are:
- The site address and the type of premises
- Photos showing the whole system and its surroundings
- How we’d reach plant on a roof or in a plant room
- The paperwork from the last visit, if you have it
Every quote begins with a look at the system, from your photos and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work, before we start.
Why deal with it now?
An EHO visit, an insurance renewal or a fire risk assessment is a bad time to find your extract records are thin. A recent inspection report means you are ready when asked. A planned visit to Stanborough is easier to arrange than an emergency callout.
You won’t find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we will explain what it covers.
Why book with us
- We diagnose before we treat
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Full insurance on every job
- One contact for all your sites in London and the South East
Read our cost guide and how to check a contractor.
Common questions in Stanborough
Can you clean school kitchen extracts in Stanborough during the holidays?
Yes. The holidays are the usual time for school work. With about 21 schools and colleges on the FSA’s register within roughly a mile and a half of Stanborough, it pays to plan holiday dates ahead. Tell us your holiday dates and we will book the visit for when the site is empty.
Which fire authority looks after Stanborough?
Stanborough is in the area of Hertfordshire Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
What information do you need?
Where the site is, what it is and when it’s open, plus photos of the system and your last certificate or report if you have one.
How much does TR19 inspection cost in Stanborough?
Every site is different, so each gets its own fixed quote. To get one, phone us on 0345 646 2711, or send details by email and tell us about the site and its opening hours.
Is TR19 a legal requirement?
No. TR19® is not law; it’s BESA’s specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005, which requires the responsible person to reduce fire risk, and TR19® is what insurers and fire officers look to.
Do you work in Stanborough?
Yes. Stanborough is part of the area we cover, as part of our area across London and the South East.
What accreditations do you have?
Our accreditations are CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Will you produce a report for our insurer?
Yes. Insurers often want evidence the extract is managed to TR19®, and our audit gives a clear record of the system’s condition, along with any actions needed.