Essex · TR19 inspections and grease testing
TR19 Inspection in Margaret Roding
TR19 inspection for Margaret Roding and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Sites with gaps in their extract records
- Confirming a clean reached the whole system
- An insurer’s request for a TR19 audit
TR19 inspection in Margaret Roding, done properly
BESA’s minimum cleaning frequencies depend on how long the kitchen cooks each day: heavy use (12 to 16 hours a day) every 3 months, moderate use (6 to 12 hours) every 6 months and light use (2 to 6 hours) every 12 months. Those are minimums, and grease readings help set the real interval. If you are dealing with kitchens taken over with no cleaning records and kitchen extract systems with no recent grease readings, we can help.
In a small place like Margaret Roding, kitchens are often in older or extended buildings, with long single-storey duct runs, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Location
- Margaret Roding (CM6)
- Region
- Essex
- Paperwork
- Certificate and photo report
- Quote
- Fixed quote, normally within a working day
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
What affects the quote in Margaret Roding
The survey tells us what the work involves. We look at:
- Site rules, permits and inductions
- The number of sites or systems
- Where the site is and how we reach it
- How easy every part is to reach
You will not find a price list here, because the cost depends on the site in front of us. For a fixed quote, ring 0345 646 2711 or email us, and we’ll talk you through it.
What to send for a quote
Photos let us diagnose from a distance. Try to include:
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
- The paperwork from the last visit, if you have it
- Close-ups of filters, grilles, hatches or access panels
For TR19 inspection in Margaret Roding, call 0345 646 2711 or drop us a line. Tell us what kind of premises it is and when it’s open, plus pictures or the previous report if they’re to hand. We usually send a fixed quote within one working day.
TR19 inspection around Margaret Roding
The fire and rescue service for Margaret Roding is Essex County Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. Kitchens in Margaret Roding get their food hygiene inspections from Uttlesford council. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Keeping each certificate and photo report on file helps show the extract is looked after.
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Barrington Hall is about 4.8 miles north-west), access may need planning. Where a hall near Parish Church of St Margaret, or anywhere in Margaret Roding, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Margaret Roding is about 8 miles north-west of Chelmsford, in Essex. If you need TR19 inspection in Margaret Roding, please ring 0345 646 2711, or send details by email for a fixed quote. We work across South East England and London, including Margaret Roding. Margaret Roding is one of 644 towns, villages and districts in Essex we cover for commercial clients. You can also see our page for Chelmsford, roughly 8 miles from Margaret Roding.
We work across CM6 for TR19 inspection and the streets around it. If your site is just outside Margaret Roding, we cover Leaden Roding (1 mile north), Good Easter (2 miles east), Chalk End (2 miles south-east), Berners Roding (2 miles south) and Shellow Bowells (2 miles south). Within a short drive, we also cover Chelmsford (8 miles south-east), Braintree (12 miles north-east), Harlow (9 miles west), Brentwood (11 miles south), Billericay (12 miles south-east) and Witham (14 miles east).
Near you in Margaret Roding
Well-known places in the area include Willingale Doe (2.3 miles south).
Looking after it afterwards
Simple habits between visits make a real difference. We recommend:
- Keep the route to access panels clear
- Send TR19 audit reports to your insurer on request
- Store grease readings where your insurer can see them
- Look out for grease drips round the canopy edge
Any access problems we found are listed with a suggested fix. With panels fitted, the next clean can cover every section.
Fit access panels where the survey finds sections cannot be reached, so every part of the duct can be cleaned.
How the job changes from site to site
Schools, hospitals and care homes
Inspections are planned around mealtimes and holidays so meals aren’t affected.
Vertical risers
Risers carry the extract up through the building. Grease can drain down and pool at the bottom, so the base is a key test point.
Landlords, agents and facilities managers
We also work for facilities teams across offices, schools and healthcare across Essex. Work can be phased by floor, building or site around the people who use them.
Whether it’s one building or many, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Nearby places to Margaret Roding
More services for Margaret Roding
FAQs for Margaret Roding
Who is the fire and rescue service for Margaret Roding?
That is Essex County Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Which environmental health team covers Margaret Roding?
Kitchens in Margaret Roding are inspected by Uttlesford council’s environmental health officers. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
What does TR19 mean?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
What about areas you cannot get to?
We never leave them off the paperwork. The report says which parts couldn’t be reached and why, and we can quote to improve the access.
What is grease thickness testing?
Grease thickness testing measures the layer of grease on the duct surfaces, using the Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). Each reading is recorded in microns.
How much does TR19 inspection cost?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. We fix the price before any work starts.
What does a pre-clean survey involve?
It’s a look at the whole extract before it’s cleaned, with readings and photos. We can work from photos and details, or visit, whichever suits the system.
Can you inspect our extract for our insurance company?
Yes, for kitchens across the South East and London. Share the insurer’s request so the report addresses it.
What happens on the day
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the job takes an hour or two for a single kitchen, longer for a large or complex system. Visits to a village like Margaret Roding are booked in advance, at a time that suits whoever runs the site.
- Post-clean verification is booked once the clean is done.
- The same access points are opened up.
- We repeat the WFTT or DTT readings.
- Photos are taken to show the condition after the clean.
- We report the findings and flag any areas that need more work.
Before we arrive
- Clear the space around the work
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Name a contact who can let us in at the agreed time
Ask for a quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in pictures, get a survey first. Either way, you get a fixed price before work begins.
Read more
What TR19 inspection can’t fix
We’ll always give you a straight diagnosis, so here’s what this work cannot put right:
- The legal duty, which stays with the responsible person
- A faulty or failing extract fan
- Heavy deposits found on test, which still need cleaning
Not sure which it is? You can call us on 0345 646 2711 or drop us a line and we will tell you honestly before booking.
Parts of the system we cover
- Access surveys
- Wet film thickness tests
- Pre-clean surveys
- Post-clean checks
- Deposit thickness tests
- Insurer audits
What staff can safely do
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, and that is where we come in.