Essex · TR19 inspections and grease testing
TR19 inspections in Layer Marney
TR19 inspection in Layer Marney from ventilation hygiene specialists trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Missing TR19 certificates or history
- Parts of the system left out of past cleans
- Systems that need surveying before cleaning
How we handle TR19 inspection in Layer Marney
BESA’s minimum cleaning frequencies depend on how long the kitchen cooks each day: heavy use (12 to 16 hours a day) every 3 months, moderate use (6 to 12 hours) every 6 months and light use (2 to 6 hours) every 12 months. Those are minimums, and grease readings help set the real interval. We’re often asked to deal with parts of the system left out of past cleans and checking the result of a recent clean, across deposit thickness tests, access surveys and post-clean checks.
In a village or hamlet like Layer Marney, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease.
The sign-off is always in writing: a dated report with photos of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Place
- Layer Marney (CO5)
- Wider area
- Essex
- Records
- Certificate plus before-and-after pictures
- Quote
- Fixed quote, normally within a working day
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Looking after it afterwards
Good habits slow the build-up between visits. A few tips:
- Flag changes in how much frying the kitchen does
- Keep to the recommended interval
- Store grease readings where your insurer can see them
- Send TR19 audit reports to your insurer on request
Readings of 500 microns or more are highlighted as needing immediate spot cleaning, and we can quote to do it.
Close the access gaps found during inspection, so every part of the duct can be cleaned.
What happens on the day
There are three stages on the day: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with photos. Most of the time goes on the work itself, and that takes around an hour or two per canopy and duct system. Photos of the system and how to reach it help us plan a visit to Layer Marney.
- The visit is arranged for when the kitchen isn’t busy.
- We look over the canopy, plenum, ducts, fan and discharge.
- We take WFTT or DTT readings at set points along the system.
- We photograph the test points and record any sections we cannot reach.
- We send a report setting out the readings, photos and next steps.
Before we arrive
- Name a contact who can let us in at the agreed time
- Find the previous report, if there is one
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Getting a quote
Quotes are quick. Call or email with a few details and you will usually have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Advice
What staff can safely do
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Places near Layer Marney
What else we do in Layer Marney
Kitchen extracts in Layer Marney
At about 44 miles from central London, Layer Marney sits well inside the area we cover. A survey and a fixed quote come first, then the visit at a time that suits you. In Layer Marney, food businesses are inspected by environmental health officers from Colchester council. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Our report lists what was cleaned and when, which is useful to have ready.
Where a hall near Church of St Mary the Virgin, or anywhere in Layer Marney, hosts lunch clubs or events, its extract gathers grease just as a café’s does. If your kitchen is in a listed or historic building, like the houses around Layer Marney (Layer Marney Tower is about 0.4 miles south), fitting access panels needs care. If you look after a school kitchen, at a school such as Thurstable School or anywhere near Layer Marney, the holidays are the usual time for a TR19® clean.
Layer Marney is about 6 miles south-west of Colchester, in Essex. From the centre of Layer Marney to the outskirts, TR19 inspection is available to all kinds of commercial premises, from a single unit to a large public building. Layer Marney is one of 644 places in Essex we cover for TR19 inspection. We also work in Chelmsford, about 15 miles from Layer Marney.
Every address in CO5 is within our area for TR19 inspection, from the main roads to the quietest streets. If your site is just outside Layer Marney, we cover Messing (2 miles west), Easthorpe (2 miles north-west), Tiptree (2 miles south-west), Mulberry Green (2 miles north) and Windmill Hill (3 miles west). Larger places within reach include Colchester (6 miles north-east), Chelmsford (15 miles south-west), Braintree (11 miles west), Clacton-on-Sea (15 miles east), Maldon (9 miles south-west) and Witham (7 miles west).
Landmarks near Layer Marney
The nearest railway station is Marks Tey station, about 3.6 miles north. Other landmarks nearby include Birch Castle (1.4 miles north-east) and Anchor Press Museum (2.1 miles south-west). Not far away are Oxley Meadow.
What a clean won’t put right
We will always give you a straight diagnosis, so here’s what TR19 inspection won’t do:
- Heavy deposits found on test, which still need cleaning
- Mechanical faults in the extract
- Ductwork that was designed or installed badly
If you are not sure, just call 0345 646 2711, or send details by email and we’ll give you a straight answer before you book.
What the work covers
- Access surveys
- Wet film thickness tests
- Insurer audits
- Post-clean checks
- Deposit thickness tests
- Pre-clean surveys
Leave it or put it right?
Don’t wait for an EHO visit or insurance renewal to find gaps in your extract records. An inspection now gives a site in Layer Marney a current picture. A fault that closes a site in a village like Layer Marney affects everyone who depends on it.
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before work begins.
Why us?
- Trading since 2009
- We diagnose before we treat
- One number for every site across the South East and London
- Out-of-hours work and a 24/7 emergency line
See our cost guide or our accreditations.
Landlords, agents and facilities managers
Facilities teams in offices, schools and healthcare sites book us too in Layer Marney and across Essex. Work can be phased by floor, building or site to keep disruption down.
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We are happy to deal with either side, and the report can go to both.
Questions from Layer Marney
Do you cover smaller places like Layer Marney?
Yes. Villages and rural sites across the South East are part of our work, Layer Marney included. Photos of the system and directions to the site help us plan the visit.
Can you work in Layer Marney outside opening hours?
Yes, out-of-hours work is a big part of what we do. The work in Layer Marney can fit around your hours. Let us know the hours you are closed and we will book within them.
Can we book visits on a schedule?
Yes, of course. Send details of the systems and how they’re used, and we’ll suggest a schedule and quote for it.
What do you do to protect the area?
By covering it before any work starts. We keep the work contained and leave the area clean.
Do we have to follow TR19 by law?
No. TR19® is BESA’s specification and the industry benchmark, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005, which requires the responsible person to reduce fire risk, and insurers, fire officers and EHOs look to TR19® as the benchmark.
Do you look at the system first?
Yes. Every job is surveyed first, from your pictures and details, or with a visit where necessary. Then you get a fixed quote.
Which accreditations do you hold?
We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.
How often should a kitchen extract be inspected?
Enough to be sure grease stays within the TR19® Grease figures between cleans. If readings rise, the interval should shorten.
What affects the quote in Layer Marney
The quote reflects the site in front of us. We take into account:
- Whether several sites go on one quote
- Parking and loading at the site
- How easy every part is to reach
- What state the system is in
What you pay depends on the size of the system, what state it’s in and how easy it is to reach. You get a fixed price before we start, so there are no surprises.
What to send for a quote
You do not need the technical terms. It helps if you can send:
- A few general shots of the system
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The times we could work without disrupting the site
- The site address and the type of premises
For TR19 inspection in Layer Marney, phone us on 0345 646 2711, or send details by email. Let us know the site type and the opening hours, and send photos or your last report if you can. A fixed quote usually follows within one working day.