Essex · TR19 inspections and grease testing
TR19 Inspection in Frinton-on-Sea
TR19 inspections and grease testing for commercial sites in Frinton-on-Sea and across Essex. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- Extracts that have never been grease tested
- Systems that need surveying before cleaning
- Parts of the system left out of past cleans
Your questions about TR19 inspection in Frinton-on-Sea
Does the sea air around Frinton-on-Sea make a difference to TR19 inspection?
It can. Frinton-on-Sea is within about 1 mile of the coast, and salt air speeds up corrosion. A fan housing that is rusting near the coast can fail sooner, so it’s worth catching early.
Can you get to a site in Frinton-on-Sea?
Yes. Villages and rural sites across the South East are part of our work, Frinton-on-Sea included. Let us know about access, parking and anything unusual about getting there when you book.
What does TR19 mean?
TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Will you produce a report for our insurer?
Yes. Our TR19 audits cover readings, photos, access and a recommended cleaning interval. You can pass it straight to your insurer or broker.
Do you offer emergency callouts?
Yes, 24/7. Our office is open from 8am to 6pm on weekdays, with the emergency line covering every other hour.
What happens to the waste?
Anything we remove is contained as we work and taken away with us, including grease, debris and dirty water. We don’t leave it behind.
How much notice should we give?
The more notice, the better, especially for out-of-hours work. We usually quote within one working day, and there’s a 24/7 line for emergencies.
Can you set up regular visits?
Yes. Scheduled maintenance plans are part of what we do, set at the interval the system needs. The report from each visit recommends the next date.
TR19 inspection in Frinton-on-Sea, done properly
A pre-clean survey looks at the whole system, from canopy to discharge. Access is checked along the full length, and record grease readings at set points. Common call-outs are for missing TR19 certificates or history and insurance renewals needing proof of TR19 cleaning, on wet film thickness tests, deposit thickness tests and insurer audits.
For a smaller kitchen near Frinton-on-Sea, a TR19® clean is the same job as anywhere: canopy, filters, plenum, duct, fan and discharge. We plan the visit around your hours, with the journey sorted in advance.
Accreditations are easy to claim and worth checking. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Place
- Frinton-on-Sea (CO13, CO14)
- Region
- Essex
- Records
- Certificate plus before-and-after pictures
- Quotes
- A fixed price before work begins
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Kitchen extracts in Frinton-on-Sea
Frinton-on-Sea is within about 1 mile of the coast. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. The Food Standards Agency lists about 8 bars, pubs and nightclubs as registered food businesses within 1.5 miles or so of the middle of Frinton-on-Sea. Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. Environmental health officers from Tendring council inspect food businesses in Frinton-on-Sea. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Before-and-after pictures from each clean are a simple way to show the extract is in hand.
Term dates shape school work: for a school like Frinton Primary School, an extract clean fits neatly into a half-term or summer break. If you run a café or takeaway near Frinton-On-Sea station, early starts and late finishes leave little time to clean, so overnight extract cleaning suits.
Frinton-on-Sea is about 5 miles north-east of Clacton-on-Sea, in Essex. We provide TR19 inspection for businesses, landlords and public buildings in Frinton-on-Sea and the rest of Essex. Our Essex coverage runs to 644 places, Frinton-on-Sea among them. There’s also a page for Chelmsford, roughly 33 miles from Frinton-on-Sea.
We cover every part of CO13 and CO14 for TR19 inspection and the roads nearby. That includes premises on Glebe Way, Greenway and Pole Barn Lane and the roads around them. Being close to the B1033 and B1336, Frinton-on-Sea is easy for our technicians to reach at any hour. Neighbouring places we cover for TR19 inspection include Kirby Cross (1 mile north-west), Walton-on-the-Naze (1 mile north-east), Kirby-le-Soken (1 mile north-west), Great Holland (2 miles west) and Lane End (2 miles north-west). Within a short drive, we also cover Colchester (15 miles west), Clacton-on-Sea (5 miles south-west), Harwich (7 miles north), Greenstead (14 miles west), Wivenhoe (12 miles west) and Brightlingsea (10 miles west).
Local landmarks in Frinton-on-Sea
Around Frinton-on-Sea, our work takes us to kitchens and buildings near The Lock and Barrel pub, Tendring Technology College and Frinton Park and the streets around them. There’s a railway station in Frinton-on-Sea itself: Frinton-On-Sea station. For a walk, there’s Great Holland Pits.
Between visits
So the system stays in good health:
- Don’t box in or cover duct access panels
- Store grease readings where your insurer can see them
- Diary the next grease test and clean
- Keep grease filters clean and fitted properly
For an insurer audit, send them the report as it is, including readings, photos and any inaccessible sections.
Clean, correctly fitted filters stop more grease reaching the duct. Missing or damaged filters let grease straight into the plenum.
When to call us in Frinton-on-Sea
You cannot judge grease thickness by eye. A system can look clean at the filters and be heavily coated further in, so readings are the reliable guide.
If you notice any of these, it’s worth a diagnosis:
- Missing access panels found on survey
- Checking the result of a recent clean
- Insurance renewals needing proof of TR19 cleaning
- Missing TR19 certificates or history
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Thorpe Hall is about 3.6 miles west), access may need planning.
Comparing quotes
- Whether VAT is included
- Exactly which parts of the system are covered
- Whether the quote is based on a survey or pictures
- If the quote is a fixed price or an estimate
What a clean will not put right
We’d rather tell you now than book work that will not help, so here are the limits:
- The grease itself, which needs a full or spot clean
- Design faults in the extract system
- Mechanical faults in the extract
If you’re not sure, just ring 0345 646 2711, or send details by email and we will give you a straight answer before booking.
What we work on in Frinton-on-Sea
- Insurer audits
- Wet film thickness tests
- Access surveys
- Pre-clean surveys
- Post-clean checks
- Deposit thickness tests
Nearby places to Frinton-on-Sea
Also in Frinton-on-Sea
How the job changes from site to site
Extract fan and discharge
Grease on the fan adds to wear. Readings show if it needs attention before the next clean.
Vertical risers
Risers in multi-storey buildings can pass through other areas, so access is planned in advance.
The process
There are three stages on the day: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and pictures. The middle part takes longest, and that takes a morning or less for one kitchen, more where there are several systems. For a place like Frinton-on-Sea, we load the van from the survey notes so the work can be done in one visit where possible.
- We agree a time when the kitchen is closed or quiet.
- We look over the canopy, plenum, ducts, fan and discharge.
- We take WFTT or DTT readings at set points along the system.
- We photograph the test points and record any sections we can’t reach.
- You get a report with readings, photos and recommendations.
How to prepare
- Agree a time when the area can be out of use
- Tell us where we can park and unload
- Tell us about site rules, permits or sign-in
How to get a quote
There’s no standard price list, because every site is different. We look at your system first, from photos or on a visit, and then send you a fixed quote. To start, ring 0345 646 2711, or send details by email.
Related advice
Why it’s worth doing now in Frinton-on-Sea
If there’s a fire or a claim, your insurer may ask for TR19 records. Without them, a claim can be reduced or refused. Getting an inspection done now starts that paper trail. Booking ahead lets us plan the trip to Frinton-on-Sea at a time that suits you.
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered and we’ll price it together.
Why book with us
- CHAS and SafeContractor accredited, with ISO 9001
- Photo reports with every job
- Fixed quotes from a survey or photos
- Out-of-hours work and a 24/7 emergency line
Read our cost guide and how to check a contractor.
What affects the cost of TR19 inspection
The price is fixed before any work begins. It takes into account:
- The size of the system
- The condition of the system
- One-off work versus a regular cycle
- Access, including roofs, risers and ceiling voids
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before we start, so you know where you stand.
What to send for a quote
Before you ask for a quote, gather:
- Any symptoms, from odd noises to smells or leaks
- Any access panels or hatches you can see
- The paperwork from the last visit, if you have it
- Where the site is and what kind of site it is
To get a fixed quote, give us a ring on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You will normally have a quote within one working day.