Essex · TR19 inspections and grease testing

TR19 inspections and grease testing in Clatterford End, Essex

TR19 inspection in Clatterford End from ventilation hygiene specialists trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.

  • An insurer’s request for a TR19 audit
  • Parts of the system left out of past cleans
  • Kitchens whose menu or hours have changed

TR19 inspection near Clatterford End

About our TR19 inspection in Clatterford End

A pre-clean survey looks at the whole system, from canopy to discharge. Access is checked along the full length, and record grease readings at set points. The work covers wet film thickness tests, post-clean checks and deposit thickness tests, and common reasons people get in touch are pre-clean surveys before a first TR19 clean and heavy grease suspected in the plenum or ducts.

Work in a small place like Clatterford End starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.

Think of the report as the system’s health record: dated, with photos, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.

Before and after view down the inside of a rectangular extract duct
Where
Clatterford End (CM5)
Wider area
Essex
Paperwork
Certificate and photo report
Quotes
Fixed quote, typically within a working day
When we work
When your site is closed, plus a 24/7 line
Telephone
0345 646 2711
Last updated
30 October 2026

What a clean won’t put right

We’d rather tell you now than book work that will not help, so these are the things it will not cover:

  • The responsible person’s own fire risk assessment
  • The grease itself, which needs a full or spot clean
  • Installation problems, which fall under design guidance such as DW172

If you are not sure, just phone us on 0345 646 2711, or email photos and we’ll give you a straight answer.

What we work on in Clatterford End

  • Insurer audits
  • Pre-clean surveys
  • Wet film thickness tests
  • Access surveys
  • Post-clean checks
  • Deposit thickness tests

Questions from Clatterford End

Do you work overnight in Clatterford End?

Yes, we can come after you close and finish before you open. Your customers, staff or residents in Clatterford End needn’t be disturbed. Your opening times are the first thing we ask for.

Can you get to a site in Clatterford End?

Yes, Clatterford End is part of our area, however small the site. A survey first, from photos or a visit, means we arrive with the right kit.

What grease levels does TR19 allow?

The TR19® Grease figures are a mean of 200 microns or less between cleans, and immediate spot cleaning wherever a reading hits 500 microns. Our report sets your readings against both.

How far ahead should we book?

It depends on the time you need and how big the job is. Mention your preferred dates with your enquiry, and if it’s an emergency, call us any time.

What information do you need?

Only a few details: where it is, what kind of site, when it’s open and the access. Photos and any previous paperwork make it quicker. After that, simply call 0345 646 2711, or email photos.

Which accreditations do you hold?

CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We are fully insured and have been trading since 2009.

Do you work with multi-site operators?

Yes. One number covers all your sites across London and the South East, and visits can be set on a regular cycle.

Which sectors do you work in?

Any site with a kitchen or a ventilation system to look after, from a single café to a large school. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.

What we are called out for in Clatterford End

Grease builds up as cooking vapour cools inside the extract. It often collects where nobody can see it: the plenum, bends and horizontal runs.

Common reasons sites call us are:

  • Parts of the system left out of past cleans
  • Ductwork where grease may be over the TR19 limits
  • Kitchens taken over with no cleaning records
  • Kitchens whose menu or hours have changed

Term dates shape school work: for a school like The Ongar Academy, an extract clean fits neatly into a half-term or summer break.

Questions to ask before you book

  • Whether inaccessible sections are listed on the report
  • What paperwork you get at the end
  • If the quote is a fixed price or an estimate
  • Whether they recommend a next date

Choosing a duct cleaning contractor

Managing agents and facilities teams in Clatterford End

Managing agents often deal with us directly. Tell us the site, the work and the access arrangements and we’ll come back with a fixed quote.

Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.

Kitchen extracts in Clatterford End

The fire and rescue service for Clatterford End is Essex County Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Clatterford End is about 23 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible.

Volunteers running a hall kitchen near Church of St Nicholas, or anywhere in Clatterford End, may not know when the extract was last cleaned, and a grease test settles it.

Clatterford End is about 7 miles east of Harlow, in Essex. Whether your site is in the middle of Clatterford End or further out, TR19 inspection is available to all kinds of commercial premises, from small sites to large estates. Our Essex coverage runs to 644 places, Clatterford End among them. Chelmsford is in our area too, around 10 miles away.

Our technicians cover all of the CM5 postcode area for TR19 inspection and the streets around it. Local streets include Moreton Road, Ongar Road and Forest Drive, all of which we cover for TR19 inspection. Neighbouring places we cover for TR19 inspection include Fyfield (1 mile east), Cannon's Green (1 mile south-east), Norwood End (1 mile north), Norton Mandeville (2 miles south-east) and Shelley (2 miles south-west). Further out, we also cover Chelmsford (10 miles east), Basildon (14 miles south-east), Harlow (7 miles west), Brentwood (8 miles south), Billericay (10 miles south-east) and Loughton (10 miles south-west).

Around Clatterford End

In Clatterford End, that means kitchens and buildings near Queens Head Public House and the streets around them. Well-known places in the area include Willingale Doe (2.5 miles east).

Map of Clatterford End © OpenStreetMap contributors

Aftercare tips

Once we have finished, these simple steps help:

  • File every inspection report with your certificates
  • Keep the route to access panels clear
  • Tell us if menus or opening hours change
  • Share inspection reports with your insurer or broker when asked

Where sections couldn’t be reached, the report says where access panels would help. Fitting them before the next clean means the whole system gets done.

Keep filters clean and in place. Gaps around filters let grease get past them.

What the work involves, part by part

Schools, hospitals and care homes

We fit testing around service times and school holidays to avoid disruption.

Restaurants, pubs and hotels

Heavy use under BESA guidance, 12 to 16 hours a day, means a clean at least every 3 months, and readings show whether that’s enough.

What we do, step by step

The first job on site is protection: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. It takes an hour or two for a single kitchen, longer for a large or complex system, and we clear up before we go. Seeing the system in photos first means the trip to Clatterford End can be planned properly.

  1. The visit is arranged for when the kitchen isn’t busy.
  2. We look over the canopy, plenum, ducts, fan and discharge.
  3. Grease thickness is measured at set points by WFTT or DTT.
  4. Photos are taken at each point, and access gaps noted.
  5. The findings go into a report with readings, photos and a recommended next clean.

How to prepare

  • Tell us about site rules, permits or sign-in
  • Clear the space around the work
  • Dig out any earlier paperwork for the system

How to get a quote

For TR19 inspection in Clatterford End, ring 0345 646 2711 or email us. Tell us what kind of premises it is and when it’s open, plus pictures or the previous report if they’re to hand. We typically send a fixed quote within one working day.

Get a price

Read more

In-house cleaning or a specialist?

When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.

Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London