Southend-on-Sea · TR19 inspections and grease testing
TR19 inspections and grease testing in Barling, Southend-on-Sea
TR19 inspection for Barling, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Extracts that have never been grease tested
- Checking the result of a recent clean
- Kitchens taken over with no cleaning records
TR19 inspection for kitchens and businesses in Barling
Grease thickness testing tells you how much grease is sitting in the canopy, ducts and fan. We use the Wet Film Thickness Test (WFTT) or the Deposit Thickness Test (DTT), taking readings at set points. The results show whether the system needs cleaning and how soon. Common call-outs are for an insurer’s request for a TR19 audit and missing access panels found on survey, on access surveys, deposit thickness tests and post-clean checks.
Work in a small place like Barling starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
A written report with photos follows every visit, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Where
- Barling (SS3)
- Region
- Southend-on-Sea
- Reporting
- Certificate and photo report
- Price
- Fixed quote, normally within a working day
- Working hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Staff cleaning versus specialist work
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Why it’s worth doing now in Barling
After an incident, an insurer can ask to see proof of TR19 cleaning and inspection. Missing records can put a claim at risk. An up-to-date inspection report is a good place to start. In a place like Barling, ductwork and fans are easy to forget until something goes wrong.
What you pay depends on the size of the system, the condition it’s in and access to every part of it. We give you a fixed price before work begins, so you know where you stand.
Why book with us
- Work around your opening hours, with 24/7 emergency cover
- A single point of contact for sites across the South East and London
- Fully insured
- Photo reports with every job
Read our cost guide and how to check a contractor.
Part by part
Schools, hospitals and care homes
In healthcare and care settings, kitchens may run from early until late. Readings show if cleaning is frequent enough.
Canopy and plenum
The plenum behind the filters can carry a lot of grease. Readings and pictures are taken in the plenum on every inspection.
What happens on the day
At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. All told, the work takes a morning or less for one kitchen, more where there are several systems. If you can send photos, we can arrive in Barling knowing what to expect.
- The visit is arranged for when the kitchen is not busy.
- We look over the canopy, plenum, ducts, fan and discharge.
- Grease readings are taken at set points using WFTT or DTT.
- Each test point and any access problems are photographed.
- The findings go into a report with readings, pictures and a recommended next clean.
Getting ready for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Let us know about permits to work or site inductions
- Arrange a key holder or contact on site
Getting a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
Read more
Nearby places to Barling
What else we do in Barling
Looking after it afterwards
Here’s the after-treatment advice, short and simple:
- Book the next test on the date in the report
- Store grease readings where your insurer can see them
- Look out for grease drips round the canopy edge
- Tell us if menus or opening hours change
If any reading is 500 microns or more, the report flags it for immediate spot cleaning, and we can quote to do it.
Fit access panels where the survey finds sections can’t be reached, so grease is not left building in hidden parts.
Grease, kitchens and Barling
Barling is within about 3 miles of the coast. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. In Barling, food businesses are inspected by environmental health officers from Rochford council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Our report lists what was cleaned and when, which is useful to have ready. Barling sits within the area of Essex County Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
Southchurch Hall, about 3.4 miles south-west, is one of the historic houses near Barling; if you run event catering at a venue like that, cleans can be booked between functions. Where a hall near Church of All Saints, or anywhere in Barling, hosts lunch clubs or events, its extract gathers grease just as a café’s does. Term dates shape school work: for a school like Barling Magna Primary Academy, an extract clean fits neatly into a half-term or summer break.
Barling is about 2 miles north of Shoeburyness, in Southend-on-Sea. Wherever you are in the SS3 postcode area, we can take on TR19 inspection. Barling is one of 16 places in Southend-on-Sea where we work for commercial clients. There’s also a page for Chelmsford, about 17 miles away.
Every address in SS3 is within our area for TR19 inspection, from the main roads to the quietest streets. Whether your site is on Church Road and Little Wakering Road or a nearby road, our technicians can take on the work. Close by, we work in Little Wakering (1 mile south), Stonebridge (1 mile south-west), Paglesham (2 miles north), North Shoebury (2 miles south) and Great Stambridge (2 miles north-west). We also work in nearby towns such as Southend-on-Sea (4 miles south-west), Prittlewell (4 miles south-west), Leigh-on-Sea (6 miles west), Westcliff-on-Sea (5 miles south-west), Southchurch (3 miles south-west) and Chalkwell (5 miles south-west).
Near you in Barling
Locally, jobs take us to businesses close to The Castle Inn, among other places. The nearest railway station is Thorpe Bay station, about 2.6 miles south-west. Other landmarks nearby include Rayleigh Windmill Museum (3.4 miles west) and Southend University Hospital (4.4 miles west). Green spaces nearby include Lion Creek and Lower Raypits.
Fixed quotes for TR19 inspection in Barling
We quote each job individually. These are the things that affect it:
- How big the system is
- The number of sites or systems
- Parking and loading at the site
- Access, including roofs, risers and ceiling voids
You won’t find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
What to send for a quote
When you contact us, it’s useful to have:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The times we could work without disrupting the site
- Any access panels or hatches you can see
- Any previous report or certificate
Quotes are quick. Call or email with a few details and you will typically have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Common questions in Barling
Do you cover smaller places like Barling?
Yes, Barling is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
Who is the fire and rescue service for Barling?
Fire safety enforcement in Barling is handled by Essex County Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Can you come out in an emergency?
Yes, day and night, every day of the year. Our office is open from 8am to 6pm on weekdays, and the emergency line covers the rest.
What happens to the waste?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on rather than letting it spread.
How much does TR19 inspection cost?
Every site is different, so each gets its own fixed quote. To get one, call us on 0345 646 2711, or send details by email and tell us about the site and its opening hours.
Can you quote from photos?
Yes, where the pictures show enough. If not, a site survey comes first, then a fixed quote.
Do you offer maintenance contracts?
Yes. Scheduled maintenance plans are part of what we do, with visits at the interval your system needs. The report from each visit recommends the next date.
At what point does grease need cleaning?
Under TR19® Grease, the mean thickness should not exceed 200 microns between cleans. 500 microns or more at any point calls for immediate spot cleaning.
What a clean will not put right
It’s worth knowing the limits before booking:
- The grease itself, which needs a full or spot clean
- Fan breakdowns, which need a repair visit
- Design faults in the extract system
If you’re not sure, just ring 0345 646 2711 or use the quote form and we’ll give you a straight answer before you book.
Parts of the system we cover
- Deposit thickness tests
- Access surveys
- Wet film thickness tests
- Pre-clean surveys
- Post-clean checks
- Insurer audits