Hampshire · Kitchen extract cleaning
Kitchen extraction cleaning in Binley
We cover Binley for TR19 Grease cleaning of complete kitchen extract systems, from canopy to discharge. Fixed quotes, work around your opening hours and photo reports on every job.
- Ductwork thick with old, hardened grease
- An extract that no longer clears the smoke
- A TR19 certificate needed for the insurer
About our kitchen extract cleaning in Binley
The ducts are where most of the grease hides. Access panels let us into the duct runs and risers, removing thick grease by hand, then using degreasers, hot water or steam to suit the deposit. Anything out of reach is noted in the report, and new panels can be fitted. Typical jobs include heavy grease build-up inside the duct runs and grease smells coming from the extract, on discharge points, extract fans and canopies and hoods. Whether you call it kitchen extract cleaning, TR19 cleaning or kitchen duct cleaning, it’s the job we do every week across Hampshire.
Before we clean, we look at where the grease is: wet film or deposit thickness readings show which parts of the duct need the most attention, and readings afterwards go into your report.
For a kitchen in or near Binley, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Each visit ends with a written report and photos, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Location
- Binley (SP11)
- Region
- Hampshire
- Records
- TR19® certificate and photo report
- Price
- A fixed price before work begins
- Hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Part by part
Ductwork and risers
Horizontal runs collect grease as the air slows and cools. Each run is cleaned through its access panels, recording any that cannot be reached.
Grease filters
Baffle filters are cleaned as part of every TR19 clean, and put back so they seat correctly. Damaged ones are noted on the report.
Common problems we fix in Binley
A lot of duct grease gets there because the filters let it through. Filters that are bent, badly fitted, missing or left uncleaned let more fat into the plenum and duct, and from there it travels on to the fan.
It’s time to book a visit if you see:
- Ductwork thick with old, hardened grease
- Grease drips onto cooking equipment
- A kitchen with no current TR19 certificate
- A TR19 certificate needed for the insurer
A hospital like Andover War Memorial Hospital, about 5.9 miles south-west, is the kind of site where a kitchen may cook for patients, staff and visitors all day.
Questions to ask before you book
- What insurance they carry
- What happens if part of the system can’t be accessed
- Whether they recommend a next date
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
Binley kitchens: local notes
It’s Basingstoke and Deane council that sends environmental health officers to food businesses in Binley. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A dated certificate in the maintenance file answers the question before it’s asked. Binley, about 58 miles from central London, is within our usual area. Visits are booked around your hours, evenings and weekends included.
Historic houses near Binley, such as Highclere Castle about 3.8 miles north-east, are a reminder that older buildings with event kitchens can have long, awkward duct routes.
Binley is about 6 miles north-east of Andover, in Hampshire. Whether your site is in the middle of Binley or further out, kitchen extract cleaning is available to all kinds of commercial premises, from small sites to large estates. Across Hampshire, we cover 683 places, Binley among them. Reading is in our area too, about 22 miles from Binley.
Every address in SP11 is within our area for kitchen extract cleaning, from busy streets to back roads. Whether your site is on Binley Bottom and Long Hedge Drove or anywhere close by, we can help. Nearby, we also carry out kitchen extract cleaning in Wadwick (1 mile east), St Mary Bourne (2 miles south), Cole Henley (3 miles south-east), Whitchurch (4 miles south-east) and Hurstbourne Priors (4 miles south). Further out, we also cover Basingstoke (13 miles east), Winchester (15 miles south), Andover (6 miles south-west), Tadley (12 miles north-east), Hyde (15 miles south) and Popley (13 miles east).
Around Binley
For rail, the closest station is Whitchurch (Hampshire) station, about 3.6 miles south-east. Well-known places in the area include Andover War Memorial Hospital (5.9 miles south-west). Open spaces near Binley include Sidown Hill.
Leave it or put it right?
Any food business in Binley can expect visits from the council’s environmental health officers, and a greasy canopy or dripping filters won’t go unnoticed. A clean extract is one less thing to worry about on the day. A fault that closes a site in a village like Binley affects everyone who depends on it.
We don’t list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we’ll explain what it covers.
Why us?
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Fully insured
- A written report with pictures after every visit
- Ventilation hygiene specialists since 2009
Read what affects the cost or our accreditations and certificates.
Staff cleaning versus specialist work
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they do not reach the grease that builds up further in. That part needs specialist access and equipment.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
For landlords and multi-site operators
Records are where multi-site compliance often slips. Each visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.
We regularly work with managing agents. Send the address, what’s needed and how access works, and we will send a fixed quote.
What affects the cost of kitchen extract cleaning
You will get a fixed price before we start. It’s based on:
- Site rules, permits and inductions
- Whether it’s a one-off visit or part of a schedule
- The times the site is available
- The condition of the system
What you pay reflects the actual work. That’s why every job is surveyed first, and the price is agreed before work begins.
What to send for a quote
What to send for a quote:
- The postcode and the type of business
- Detail shots of panels, filters and grilles
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.
How it works
On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Anything that needs to be off for the work is switched off and left to cool before any work starts, and the area around the work is covered and protected. The work itself takes a single shift for most kitchens, with long duct runs and tall risers needing more time. The timing of a visit to Binley is set by you, and the travel is our side of the planning.
- We survey the system, from your photos or on site, canopy to discharge.
- We take grease readings at set points and send you a fixed quote.
- The kitchen is closed, the equipment cooled and everything nearby protected.
- Filters, canopy and plenum are cleaned, then the ducts, risers, fan and discharge.
- Readings are repeated, photos taken, and your TR19 certificate and photo report issued.
Getting ready for the visit
- Make sure someone can let us in and lock up afterwards
- Let us know how we reach the system, including roofs, risers and plant rooms
- Let us know when the site is closed or quiet
Get a fixed quote
Getting a quote does not take long. Send a few details and pictures, and we normally reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Advice
Binley: your questions answered
Which fire and rescue service is responsible for Binley?
Fire safety enforcement in Binley is handled by Hampshire and Isle of Wight Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Can the work in Binley be done at night or at weekends?
Yes, out-of-hours work is a big part of what we do. The work in Binley can fit around your hours. Just phone us on 0345 646 2711, or email photos with your opening times and we will plan around them.
Do you survey before quoting?
Yes. For many sites, photos and a few details are enough, and larger or hidden systems get a visit.
How far ahead should we book?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and if it’s an emergency, call us any time.
What should I send you?
Just the basics: the address, the site type, your opening hours and how we reach the system. Photos and any previous paperwork make it quicker. Then phone us on 0345 646 2711 or send us an email.
Which parts of the extract do you clean?
Everything from canopy to discharge: canopy inside and out, plenum, grease filters, ductwork, risers, extract fan and discharge, plus attenuators where fitted. Any part without access is noted.
What is TR19?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Are you a BESCA Vent Hygiene Elite member?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.