Hampshire · Fire damper testing
Fire damper testing in Wildhern, Hampshire
Fire damper testing for Wildhern, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Dampers clogged with dust or grease
- Rusted damper blades and springs
- Fire dampers that haven’t been tested for over a year
Wildhern buildings and fire safety
About 2.8 miles south of Wildhern is Andover War Memorial Hospital, the nearest hospital. Healthcare buildings rely on fire compartments to protect people who cannot easily move, and dampers keep those compartments sealed. Hampshire and Isle of Wight Fire and Rescue Service covers Wildhern. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
The nearest hospital, Andover War Memorial Hospital, is about 2.8 miles south; healthcare buildings like it are a reminder that dampers protect people who cannot move quickly.
Wildhern is about 3 miles north of Andover, in Hampshire. We carry out fire damper testing for commercial premises of every kind in Wildhern and the rest of Hampshire. Wildhern is one of 683 towns, villages and districts in Hampshire where we work for commercial clients. There’s also a page for Southampton, about 24 miles away.
We cover every part of the SP11 postcode area for fire damper testing and the streets around it. We also cover the places around Wildhern: Upper Enham (1 mile south-east), Enham Alamein (1 mile south-east), Little London (2 miles east), Knights Enham (2 miles south-east) and Smannell (2 miles south-east). Within a short drive, we also cover Andover (3 miles south), Hyde (15 miles south-east), Tidworth (7 miles west), Weeke (15 miles south-east), Kempshott (15 miles east) and Ludgershall (5 miles west).
Near you in Wildhern
In Wildhern, that means kitchens and buildings near The Hare & Hounds pub and the streets around them. Wildhern’s nearest station is Andover station, roughly 3.1 miles south of the centre. A little further out are Finkley Down Farm Museum (3.1 miles south-east) and Andover War Memorial Hospital (2.8 miles south). For a walk, there’s Anton Lakes and Mill Lake.
How we handle fire damper testing in Wildhern
Some dampers haven’t been tested since the day they went in. Ceilings have gone up, access panels have been covered or lost, and the records have gone missing. We find what we can, test what we can reach and list anything we can’t get to, so you can see exactly what still needs access. If you are dealing with blades that jam part-way when released and buildings with no damper register, we can help.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, and the dampers in them are easily forgotten. The first visit starts by locating each damper.
The sign-off is always in writing: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Location
- Wildhern (SP11)
- Wider area
- Hampshire
- Records
- Report and pictures after the visit
- Quotes
- A fixed price before any work starts
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Nearby places to Wildhern
What else we do in Wildhern
What affects the cost of fire damper testing
Sites vary more than people expect. What affects the quote:
- Travel, parking and unloading
- What state the system is in
- The size of the system
- Access, including roofs, risers and ceiling voids
Working hours, access and the scale of the site can all change the price. Each of those is built into the quote and give you a fixed price before work begins.
What to send for a quote
Photos and a few facts are often enough to price the work. Send what you can of the following:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- A few general shots of the system
- Any previous report or certificate
- Any symptoms, from odd noises to smells or leaks
We do not publish a price list, because every site is different. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To start, call 0345 646 2711 or send us an email.
Why act early in Wildhern
Faults found early are often simpler to put right. Left for years, corrosion and build-up can turn it into a full damper replacement. If the system at a site near Wildhern fails, there may be nowhere nearby to move to.
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
Why us?
- In business since 2009
- Work around your opening hours, with 24/7 emergency cover
- A fixed price before any work starts
- Fully insured
Take a look at what affects the cost and how to check a contractor.
What staff can safely do
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that’s where we come in.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
FAQs for Wildhern
Which fire and rescue service is responsible for Wildhern?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Wildhern. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Do you work in villages like Wildhern?
Yes, smaller places are covered as well as towns. Let us know about access, parking and anything unusual about getting there when you book.
Are you fully insured?
Yes. We carry full insurance and have been trading since 2009.
Is TR19 a legal requirement?
No. TR19® itself is not law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
Can you quote from pictures?
Typically, yes. Send wide shots, close-ups of any access panels and anything that worries you, and we normally come back within one working day. Some sites still need a visit, and we will say so.
How often does BESA say fire dampers should be tested?
BESA guidance calls for testing by a competent person at least once a year. A test on completion of installation comes first.
Can you test out of hours?
Yes. We work evenings, overnight and weekends, so the building keeps running. Tell us the hours that suit and we will plan around them.
Which accreditations do you hold?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We are fully insured and have been trading since 2009.
Common problems we fix in Wildhern
Corrosion is another common cause of failure. Water leaks, condensation and damp plant areas attack the casing, blade and spring, and the damper can seize quietly where no one sees it.
Most sites get in touch after spotting something like this:
- Gaps in the fire damper test log
- Fire dampers nobody can get to
- Dirty dampers that may not close
- Damper actions from a fire risk assessment
If you manage a school site such as Hatherden Church of England Primary School, any fire dampers can be tested in the holidays.
Comparing quotes
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether the figure could change on the day
- Proof of insurance
- What’s included in the scope, part by part
What we do, step by step
At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and it goes on the report too. All told, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. The timing of a visit to Wildhern is set by you, and the travel is our side of the planning.
- First we look at any damper register, drawings or earlier test reports.
- Dampers are located one by one and reached through their access panels.
- We release each fire damper blade and operate smoke dampers from their controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
Before we arrive
- Let us know about parking and loading
- Let us know when the site is closed or quiet
- Let us know how we reach the system, including roofs, risers and plant rooms
Ask for a quote
To help us quote: the address, the type of site and when it’s open, a few pictures and any previous report or certificate. Once you have those, call 0345 646 2711 or email us.
Advice
Managing agents and facilities teams in Wildhern
From a single site to a large estate, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with pictures.
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
Keeping the system healthy
No system stays clean for ever, but care slows the build-up. Our tips:
- Keep an eye out for damp around dampers
- Store test records alongside the fire risk assessment
- Diary the annual test well ahead
- Keep ceiling hatches and duct panels easy to open
The next test should be no more than a year away. The guidance is at least once a year, so it helps to book it before the date slips.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.