Hampshire · Fire damper testing
Fire damper testing in Tinkers Cross, Hampshire
Fire damper drop testing and smoke damper testing, with a record for each damper for Tinkers Cross, with a survey first and a report with photos at the end. Call for a fixed quote.
- Smoke dampers with no recent test
- Missing or out-of-date damper records
- Dampers hidden with no access panel or hatch
How we price fire damper testing
Your quote is based on your site. We take into account:
- The scale of the work
- The number of sites or systems
- Access, including roofs, risers and ceiling voids
- Parking and loading at the site
What you pay reflects the actual work. That’s why every job is surveyed first, and why the quote is fixed before we start.
What to send for a quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Close-ups of filters, grilles, hatches or access panels
- The postcode and the type of business
- How we’d reach plant on a roof or in a plant room
- The times we could work without disrupting the site
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
About our fire damper testing in Tinkers Cross
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we can’t get to, so you can see exactly what still needs access. If you have damper actions from a fire risk assessment and fire dampers that haven’t been tested for over a year, we can help.
Testing in a small place like Tinkers Cross is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
The paperwork matters as much as the work. Each visit is written up with photos, covering the work done, any areas we couldn’t access and a recommended next date. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.
- Location
- Tinkers Cross (SP6)
- Region
- Hampshire
- Records
- Written report with photos
- Quotes
- Fixed quote, typically within a working day
- Working hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Checked
- 30 October 2026
Fire dampers in Tinkers Cross buildings
Food Standards Agency data includes about 3 schools, colleges and universities and about 7 hospitals, care homes and childcare premises in and around Tinkers Cross, up to about a mile and a half out. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Tinkers Cross sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
Historic houses near Tinkers Cross, with Breamore House about 2.2 miles north, are a reminder that older buildings can hold dampers in unexpected places. A school like Fordingbridge Junior School can have any dampers tested over half-term without disturbing lessons.
Tinkers Cross is in Hampshire. We provide fire damper testing for commercial premises of every kind in Tinkers Cross and the rest of Hampshire. Tinkers Cross is one of 683 places in Hampshire we cover for fire damper testing. Southampton is in our area too, around 18 miles away.
Work in SP6 follows the same survey, fixed quote and written report as everywhere else we cover. We cover sites on Linguire Lane, Neave Road and Seton Way and the roads around them. We also cover the places around Tinkers Cross: Lower Burgate (1 mile east), Fordingbridge (1 mile south), Upper Burgate (1 mile north-east), Horseport (1 mile south-east) and Criddlestyle (1 mile south-east). We also work in nearby towns such as Totton (13 miles east), Romsey (14 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south-east) and Marchwood (15 miles east).
Landmarks near Tinkers Cross
We work in commercial kitchens and buildings around The Ship Inn and The Burgate School and Sixth Form, among other places. Nearby you will also find Fordingbridge Museum (0.8 miles south-east) and Godshill Castle Hill (1.5 miles east). Open spaces near Tinkers Cross include Blashford Lakes.
Why deal with it now?
Sites in Tinkers Cross tested every year build up a history for each damper so repeat problems show up early. A damper that was slow last year and sticks this year tells you something before it becomes a failure. If the system at a site near Tinkers Cross fails, there may be nowhere nearby to move to.
We do not list prices on the website, because the cost depends on the site in front of us. For a fixed quote, ring 0345 646 2711 or drop us a line, and we will explain what it covers.
Why book with us
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Photo reports with every job
- Every job surveyed first
- A single point of contact for sites across the South East and London
Read how cleaning jobs are priced and our accreditations and certificates.
How it works
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we’re in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes a few hours for a single floor, with bigger buildings phased over more than one visit. A quick note on how to find the site and where to park makes a visit to Tinkers Cross run smoothly.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- The damper is reset and its condition noted.
- Panels and tiles go back, and the results are written up.
How to prepare
- Allow time for equipment near the work to be turned off and cool down
- Make sure someone can let us in and lock up afterwards
- Have your last certificate or report to hand
Getting a quote
To help us quote: the address, the type of site and when it’s open, a few pictures and the last certificate or report, if there is one. Then phone us on 0345 646 2711, or email photos.
Advice
Between visits
Once we have finished, these simple steps help:
- Keep the damper register up to date after any building work
- Get remedials done soon after a failed test
- Tell contractors where dampers are before they start work
- Keep damper test reports with the fire safety log
After testing, you get a report listing each of the fire and smoke dampers we tested, with where it is and whether it passed. File it with your fire safety log so it’s to hand for assessors and insurers.
A simple register of every damper helps a great deal: location, type, last test date and result. It means nothing gets forgotten when staff or contractors change.
How the job changes from site to site
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. We note any rust or water damage on the report so the cause can be tackled.
Fusible link fire dampers
For dampers closed by a spring, BESA guidance is annual testing as a minimum. Dropping the blade reveals springs that are tired and blades that drag.
Common questions in Tinkers Cross
Is Tinkers Cross within the area you cover?
Yes, we work in villages as well as towns, and Tinkers Cross is covered. Let us know about access, parking and anything unusual about getting there when you book.
Do you work at weekends in Tinkers Cross?
Yes, out-of-hours work is a big part of what we do. The work in Tinkers Cross can fit around your hours. Tell us your opening hours when you ask for a quote.
Which sectors do you work in?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
Can one contract cover all our sites?
Yes. One number covers all your sites across London and the South East, with visits on a regular schedule.
How long will damper testing take?
As a guide, it takes from an hour or two in a small building to several visits on a large estate. It comes down mainly to how many dampers there are and how easy they are to get to.
Do you carry out smoke damper testing?
Yes. Smoke dampers are motorised, so we test them by operating them through their controls. Each one is checked for full travel and the result recorded.
What about areas you can’t get to?
We record them on the report, with a note of where it is, and we tell you what would make it reachable, for example new access panels.
Who has the duty to keep fire dampers working?
Under the Fire Safety Order 2005, it’s the responsible person, who might be the employer, owner, landlord, facilities manager or managing agent. Keeping fire safety systems working, dampers included, is part of their duty.
When it’s something else
We’d rather tell you now than book work that will not help, so here are the limits:
- Deciding where dampers should be fitted
- Dampers that were never installed where they’re needed
- Fire-stopping gaps around the duct where it passes through the wall
If you’re not sure, just call 0345 646 2711 or use the quote form and we’ll give you a straight answer before you book.
What the work covers
- Wall and floor dampers
- Motorised smoke dampers
- Hospitals and care homes
- Offices and schools
- Riser dampers
- Fusible link fire dampers
Also near Tinkers Cross
What else we do in Tinkers Cross
Managing agents and facilities teams in Tinkers Cross
Facilities teams in offices, schools and healthcare sites book us too in Tinkers Cross and across Hampshire. Larger estates can be phased building by building around the people who use them.
We regularly work with managing agents. Send the address, what’s needed and how access works, and we’ll send a fixed quote.