Surrey · Fire damper testing
Fire and smoke damper testing in Tilford
Professional fire damper testing in and around Tilford, timed so the site keeps working and finished with a written report and photos.
- Dampers affected by leaks or condensation
- Blades that jam part-way when released
- Fire damper items raised by an assessor
How we handle fire damper testing in Tilford
The point of testing is to find dampers that fail. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper rather than leaving you with a problem and no fix. The work covers hospitals and care homes, offices and schools and fusible link fire dampers, and the jobs we see most are smoke dampers with no recent test and dirty dampers that may not close.
In a village or hamlet like Tilford, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
It’s worth checking any contractor’s accreditations. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Location
- Tilford (GU10)
- Region
- Surrey
- Paperwork
- Report and photos after the visit
- Price
- Fixed quote, usually within a working day
- Hours
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Common questions in Tilford
Do you work overnight in Tilford?
Yes, evening, overnight and weekend work is normal for us. Your customers, staff or residents in Tilford needn’t be disturbed. Let us know the hours you’re closed and we’ll book within them.
Can you get to a site in Tilford?
Yes. Villages and rural sites across the South East are part of our work, Tilford included. Let us know about access, parking and anything unusual about getting there when you book.
How do you deal with dampers that cannot be reached?
We don’t leave it off the report; we note it as not reached. Once there’s a panel or a way through the ceiling, it can be tested.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before work begins, and anything we remove is contained. Before we leave, we tidy up and clean down.
Can you fix fire dampers that fail?
We note the failure and what we found. We can then repair or replace the damper as a remedial job and test it again.
Is TR19 cleaning required by law?
No, not in itself. Insurers, fire officers and EHOs look to TR19® as the benchmark, and many insurance policies ask for proof of TR19® cleaning. The law behind it is the Fire Safety Order 2005, which applies in England and Wales.
Can you quote from photos?
Often, yes. With good pictures, the site type and your last report, we can price many jobs. Where we can’t see enough, we arrange a survey.
Do you offer emergency callouts?
Yes, day and night, every day of the year. Office hours are Monday to Friday, 8am to 6pm, and the emergency line covers the rest.
What happens on the day
At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and it goes on the report too. All told, the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. Rural roads and tight entrances are worth telling us about before a visit to Tilford.
- First we check the schedule and the last set of results.
- We locate every damper and note any we can’t reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
How to prepare
- Clear the space around the work
- Let us know about parking and loading
- Tell us the best time to work, such as after service or at a weekend
Getting a quote
Every quote begins with a look at the system, from your pictures and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work, before any work starts.
Read more
Leave it or put it right?
Putting testing off does not change whether the dampers will close; it just means you do not know. BESA guidance is to test at least annually, so a missed year leaves a gap in the record too. With notice, the visit to Tilford can be fitted around your bookings and events.
What you pay depends on how big the system is, what state it’s in and how easy it is to reach. You get a fixed price before any work starts, so you know where you stand.
Why us?
- Fully insured
- A written report with pictures after every visit
- Fixed quotes, usually within one working day
- A single point of contact for sites across the South East and London
Take a look at what affects the cost and how to check a contractor.
What fire damper testing looks like in Tilford
Surrey Fire and Rescue Service covers Tilford. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises. At about 35 miles from central London, Tilford sits well inside the area we cover. Evening, overnight and weekend visits are all possible.
A school like Waverley Abbey CofE Junior School can have any dampers tested over half-term without disturbing lessons. If you manage an older building converted to a hotel or venue, like many historic houses in the area (Farnham Castle is about 3.2 miles north-west), finding every damper is the first job.
Tilford is about 3 miles south-east of Farnham, in Surrey. We provide fire damper testing for commercial premises of every kind in Tilford and the rest of Surrey. We cover 395 places across Surrey, from busy centres to quieter spots. You can also see our page for Guildford, roughly 9 miles from Tilford.
All of GU10 is within our area for fire damper testing, from the main roads to the quietest streets. Streets in the area include Tilford Street, Shepherds Way and Riversmeet, all of which we cover for fire damper testing. Neighbouring places we cover for fire damper testing include Tilford Reeds (1 mile south-west), Tilford Common (1 mile south), Charleshill (1 mile east), Lower Bourne (2 miles west) and Millbridge (2 miles south-west). Further out, we also cover Guildford (9 miles north-east), Woking (12 miles north-east), Camberley (10 miles north), Farnham (3 miles north-west), Frimley (9 miles north) and Haslemere (7 miles south).
Landmarks near Tilford
We work in commercial kitchens and buildings around Barley Mow pub, Thundry Meadows and South Farnham School and the streets around them. The closest station to Tilford is Farnham station, about 2.5 miles north-west of the centre. Well-known places in the area include Milford Hospital (5.5 miles east) and Farnham Castle (3.2 miles north-west). For a walk, there’s Upper Lake and Culverswell Hill.
Different parts, different methods
Offices and retail
Offices and shops often have dampers above ceilings that are rarely opened. Testing can be done outside opening hours so the space stays open.
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. We work through them floor by floor so nothing is missed.
Multi-site and managed buildings
Keeping records across a portfolio is half the battle. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Nearby places to Tilford
More services for Tilford
When to call us in Tilford
Building work often happens right next to dampers. A cable run through the blade path, a knocked link or a wedged blade is enough to stop a damper closing.
Any of these means the system needs a check-up:
- Smoke dampers with no recent test
- Dampers overdue for their annual drop test
- Dampers that stick or will not close fully
- Gaps in the fire damper test log
Hospitals such as Milford Hospital, about 5.5 miles east, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Tilford, the same annual testing applies.
What to look for in a quote
- How areas they can’t reach will be recorded
- How they set the interval to the next visit
- If the quote is a fixed price or an estimate
- Whether a written report and pictures are included
Between visits
To keep the system working properly between visits:
- Keep cables and fixings away from damper blades
- Diary the annual test well ahead
- Keep the damper register up to date after any building work
- Store test records alongside the fire risk assessment
Make sure trades working in ceilings and risers know where the dampers sit, and ask them not to run cables through or wedge them. If a damper has been disturbed, have it tested again.
A simple register of every damper helps a great deal: location, type, last test date and result. It means nothing gets forgotten when staff or contractors change.
When it’s something else
Before you book, it helps to know what’s not included:
- Deciding where dampers should be fitted
- Ductwork crossing a fire wall with no damper fitted
- Faults in the alarm or building controls that signal smoke dampers
If you are not sure, just phone us on 0345 646 2711 or use the quote form and we will give you a straight answer before you book.
What the work covers
- Offices and schools
- Riser dampers
- Hospitals and care homes
- Wall and floor dampers
- Fusible link fire dampers
- Motorised smoke dampers