Kent · Fire damper testing
Fire damper inspection in Three Chimneys
Fire damper testing for Three Chimneys, with a survey first and a report with pictures at the end. Ask us for a fixed quote.
- Smoke dampers that need testing through their controls
- Fire damper items raised by an assessor
- Dust or grease build-up on damper blades
About our fire damper testing in Three Chimneys
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Three Chimneys. If there’s a damper register or a set of drawings, share it with us, and we will plan the testing around when the building is in use. Common call-outs are for dampers that can’t be reached without an access panel and dampers flagged on a fire risk assessment, on hospitals and care homes, motorised smoke dampers and riser dampers.
For a building in or near Three Chimneys, the visit is planned ahead, with access agreed in advance, and the test itself is the same as in any city building.
For insurers and inspectors, the record counts. That’s why every job is written up in a report with pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Location
- Three Chimneys (TN27)
- Region
- Kent
- Records
- Written report with photos
- Price
- A fixed price before we start
- Hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Updated
- 30 October 2026
What your team can do, and what needs us
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We can diagnose it and quote.
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they do not reach the grease that builds up further in. That part needs specialist access and equipment.
How it works
Night work is normal for us. A lot of visits happen overnight or at weekends, so a kitchen or building can carry on as usual the next day. On site, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Pictures of the system and its access let us plan the work in Three Chimneys before we set off.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
How to prepare
- Mention any parking or loading restrictions
- Clear the space around the work
- Let us know how we reach the system, including roofs, risers and plant rooms
Getting a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
Related advice
Landlords, agents and facilities managers
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
We regularly work with managing agents. Send the address, what’s needed and how access works, and we will send a fixed quote.
Your questions about fire damper testing in Three Chimneys
Do you cover smaller places like Three Chimneys?
Yes, we work in villages as well as towns, and Three Chimneys is covered. Let us know about access, parking and anything unusual about getting there when you book.
Do you work overnight in Three Chimneys?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. Tell us your opening hours when you ask for a quote.
Can you come out in an emergency?
Yes. There’s a 24/7 emergency line, for problems that can’t wait. Ring any time and tell us what’s happened.
How often do fire dampers need drop testing?
BESA’s guidance is a test on installation and at least once a year after that. Some sites choose to test more often where the risk is higher.
What’s TR19?
BESA’s ventilation hygiene specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not legislation, but it’s the standard people check against.
Do you survey before quoting?
Yes. For many sites, photos and a few details are enough, and larger or hidden systems get a visit.
What accreditations do you have?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We’re fully insured and have been trading since 2009.
How long will damper testing take?
Expect it to take from an hour or two in a small building to several visits on a large estate. Access is the biggest factor, and we will give you an idea when we quote.
What we’re called out for in Three Chimneys
Over time, dust builds up on the blade, the runners and the spring. If the duct carries cooking vapour, a film of grease adds to it, and either can stop the blade dropping fully.
These are the problems we see most often:
- Dirty dampers that may not close
- Corroded dampers in damp risers and plant rooms
- Dampers that cannot be reached without an access panel
- Dampers flagged on a fire risk assessment
In Three Chimneys, each damper is dropped to prove it closes fully, then reset.
What to look for in a quote
- Whether the quote is based on a survey or pictures
- Whether inaccessible sections are listed on the report
- What paperwork you get at the end
- Whether they recommend a next date
Why it’s worth doing now in Three Chimneys
A damper that is stuck open gives fire and smoke a route straight through a fire-resisting wall. The rest of the compartment can be built perfectly and still be bypassed by the duct. It’s far better to find that out on a test than in a fire. A fault that closes a site in a village like Three Chimneys affects everyone who depends on it.
You won’t find a price list here, because the cost depends on the site in front of us. For a fixed quote, give us a ring on 0345 646 2711 or drop us a line, and we will talk you through it.
Why Three Chimneys businesses choose us
- Survey first, then a fixed quote
- CHAS and SafeContractor accredited, with ISO 9001
- Fixed quotes from a survey or photos
- Evenings, overnight and weekends, plus 24/7 emergency callout
Read how cleaning jobs are priced or our accreditations and certificates.
Fire damper testing in Three Chimneys: local notes
About 40 miles out from central London, Three Chimneys is part of the South East area we work across. Visits are booked around your hours, evenings and weekends included. Three Chimneys sits within the area of Kent Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
The nearest hospital, Benenden Hospital, is about 2.3 miles south; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly.
Three Chimneys is about 11 miles south of Maidstone, in Kent. We carry out fire damper testing for businesses, landlords and public buildings in Three Chimneys and the rest of Kent. Our Kent coverage runs to 922 places, and Three Chimneys is one of them. For sites nearby, see our Maidstone page, about 11 miles away.
Work in TN27 is surveyed, quoted and booked the same way as anywhere else. That includes premises on Hareplain Road and Sissinghurst Road and nearby roads. Close by, we work in Hareplain (1 mile north-east), Biddenden (1 mile east), Curteis' Corner (2 miles east), Standen (2 miles north-east) and Lashenden (2 miles north-east). Larger places within reach include Maidstone (11 miles north), Ashford (11 miles east), Royal Tunbridge Wells (15 miles west), Tonbridge (15 miles west), Kings Hill (14 miles north-west) and Foley Park (12 miles north).
What’s near Three Chimneys
We work in commercial kitchens and buildings around Three Chimneys Public House and the streets around them. The closest station to Three Chimneys is Headcorn station, about 3.2 miles north of the centre. Other landmarks nearby include Kent Firefighting Museum (1.2 miles north) and Sissinghurst Castle (1.3 miles west).
Looking after it afterwards
How long the results last depends on use and care. We suggest:
- Book the next test before the year runs out
- Act on failed dampers rather than leaving them on file
- File every damper report where your assessor can find it
- Keep an eye out for damp around dampers
Make sure trades working in ceilings and risers know where the dampers sit, and that they mustn’t tie, wedge or obstruct them. If a damper has been disturbed, have it tested again.
Good access is half the battle. If a damper has no access panel, have one fitted ahead of the next visit.
Nearby places to Three Chimneys
What else we do in Three Chimneys
How we price fire damper testing
Sites vary more than people expect. What affects the quote:
- The condition we find in the survey
- Site rules, permits and inductions
- Whether several sites go on one quote
- The times the site is available
Working hours, access and the scale of the site all affect the cost. We take each of them into account, and the price is fixed before we start.
What we need to know
We can often survey from pictures. Try to include:
- The postcode and the type of business
- The paperwork from the last visit, if you have it
- How we’d reach plant on a roof or in a plant room
- Close-ups of filters, grilles, hatches or access panels
Here’s what helps us quote: where the site is, what it is and its opening hours, pictures of the system and any previous report or certificate. Once you have those, call us on 0345 646 2711 or send us an email.