Kent · Fire damper testing
Fire Damper Testing in Sellindge
Fire damper testing for Sellindge, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Dirty dampers that may not close
- Dampers hidden with no access panel or hatch
- Dampers affected by leaks or condensation
About our fire damper testing in Sellindge
Fire dampers sit inside ductwork where it passes through a fire-resisting wall or floor. A fusible link holds the blade open until heat melts it, and the blade then drops to shut the duct. Drop testing proves that this still happens, and every result is written down, damper by damper. If you have corroded dampers in damp risers and plant rooms and fire dampers that haven’t been tested for over a year, we can help.
In a village or hamlet like Sellindge, there may be only a few buildings with fire dampers. Each damper still needs testing at least once a year.
A written report with pictures follows every visit, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Sellindge (TN25)
- Wider area
- Kent
- Records
- Written report with pictures
- Quotes
- Fixed quote, normally within a working day
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Looking after it afterwards
After the visit, a few habits help the work last:
- Never wedge or tie a damper open
- Add new dampers to the register as they’re fitted
- Fix water leaks in plant rooms and risers promptly
- File every damper report where your assessor can find it
Pass the report to whoever keeps your fire risk assessment up to date, so the assessment reflects where the dampers stand. Faults on the report are worth closing off quickly.
Good access is half the battle. Where there’s no hatch, an access panel makes testing possible before the next test.
When it’s something else
It’s worth knowing the limits before booking:
- Gaps in the wall or floor around the damper
- Approving the building’s fire strategy
- Fire alarm or control system faults behind a smoke damper
If you’re not sure, just call 0345 646 2711, or send details by email and we’ll give you a straight answer before you book.
What the work covers
- Fusible link fire dampers
- Wall and floor dampers
- Motorised smoke dampers
- Riser dampers
- Offices and schools
- Hospitals and care homes
What we do, step by step
We turn up at the time agreed with you, which is often after service, overnight or at a weekend. Anything that needs to be off for the work is switched off and left to cool before we start, and floors and nearby surfaces are sheeted. The work itself takes anything from a couple of hours for a handful of dampers to a full day for a large building. Pictures of the system and its access let us plan the work in Sellindge before we set off.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- The blade is released and watched to make sure it closes fully.
- We reset it and record any dirt, corrosion or damage.
- We close everything up and send the results in a report.
Getting ready for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Find the previous report, if there is one
- Let us know how we reach the system, including roofs, risers and plant rooms
Getting a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Related advice
What affects the quote in Sellindge
The quote reflects the site in front of us. We take into account:
- The size of the system
- Whether we need access equipment or extra panels
- When the work can happen, such as evenings, overnight or weekends
- A single visit or a regular plan
The cost depends on how big the system is, what state it’s in and access to every part of it. You get a fixed price before any work starts, so you know where you stand.
Helping us quote
There’s no need for technical detail. It helps if you can send:
- Close-ups of filters, grilles, hatches or access panels
- Where the site is and what kind of site it is
- Problems your staff have spotted
- The paperwork from the last visit, if you have it
To get a fixed quote, phone us on 0345 646 2711 or use the quote form and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We usually come back within one working day.
What the work involves, part by part
Access panels
If we cannot reach a damper, it goes on the report as inaccessible. Fitting a panel means it can be tested on the next visit.
Smoke dampers
Smoke dampers are motorised and run by a control system. Testing means operating them from the controls and check each blade travels fully.
Why it’s worth doing now in Sellindge
Leaving damper testing for another year does not make the dampers any more likely to work. The guidance from BESA is at least once a year, so a missed year leaves a gap in the record too. Our emergency line runs 24/7, but a planned visit to Sellindge is calmer for everyone.
What you pay reflects the actual work. That is why every job is surveyed first, and the price is agreed before we start.
What you get with us
- Fixed quotes, normally within one working day
- Ventilation hygiene specialists since 2009
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Every job surveyed first
Take a look at our cost guide and our accreditations and certificates.
Do you need fire damper testing in Sellindge?
In most buildings, Sellindge included, dampers are out of sight in ceiling voids, risers and service shafts. If there’s no hatch to reach them, they slip off everyone’s list, and one that can’t be reached can’t be tested.
It’s time to book a visit if you see:
- Smoke dampers with no recent test
- Fire dampers with no recent test record
- Missing or out-of-date damper records
- Dampers clogged with dust or grease
William Harvey Hospital, about 4.7 miles north-west of Sellindge, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
What to look for in a quote
- Whether they’re fully insured
- Whether the work can be done while the site is closed
- Whether they recommend a next date
- Whether VAT is included
Other services in Sellindge
Fire damper testing in Sellindge: local notes
Fire safety in Sellindge falls to Kent Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises. At about 55 miles from central London, Sellindge sits well inside the area we cover. The visit is fixed around your opening hours, not ours.
Historic houses near Sellindge, with Westenhanger Castle about 1.4 miles south-east, are a reminder that older buildings can hold dampers in unexpected places. For schools like Sellindge Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Sellindge is about 4 miles north-west of Hythe, in Kent. From the centre of Sellindge to the outskirts, fire damper testing is available to all kinds of commercial premises, from small sites to large estates. Sellindge is one of 922 places in Kent where we work for fire damper testing. For sites nearby, see our Maidstone page, about 24 miles away.
Postcode districts we cover here for fire damper testing: TN25. Whether your site is on Downs Way, Woodlees Close and Swan Green or a nearby road, our technicians can take on the work. Neighbouring places we cover for fire damper testing include Moorstock (1 mile north), Stanford (2 miles east), Postling (3 miles east), Stowting (3 miles north-east) and Skeete (3 miles north-east). We also work in nearby towns such as Ashford (6 miles north-west), Canterbury (13 miles north), Dover (13 miles east), Folkestone (7 miles east), Faversham (15 miles north) and Hythe (4 miles south-east).
What’s near Sellindge
The closest station to Sellindge is Westenhanger station, roughly 1.6 miles south-east of the centre. A little further out are William Harvey Hospital (4.7 miles north-west) and Lympne Castle (2.4 miles south). Not far away are Tolsford Hill and Hatch Park.
Questions from Sellindge
Can you come to Sellindge after we close?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. When you call us on 0345 646 2711 or send us an email, mention when the site is quiet.
Will you come out to Sellindge?
Yes, Sellindge is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before we start, and anything we remove is contained. At the end, the area is cleaned down.
Can you test motorised smoke dampers?
Yes. We operate each smoke damper from its controls and check it opens and closes fully. Where a controls contractor needs to be involved, we arrange it with you.
How far ahead should we book?
That depends on the slot you want and the size of the job. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
How much does fire damper testing cost in Sellindge?
Size, condition, access and working hours all affect the cost. Call for a fixed quote, normally ready within one working day.
Where does the waste go?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. None of it is left on site.
Can you look after several sites?
Yes. You deal with one contact for every site across London and the South East, and visits can be set on a regular cycle.