Portsmouth · Fire damper testing

Fire Damper Testing in Portsmouth Point

Need fire damper testing in Portsmouth Point? We diagnose first, fix the price and book the work around your hours, then sign off with a report and pictures.

  • Fire dampers nobody can get to
  • Dampers that stick or will not close fully
  • Damper actions from a fire risk assessment

Fire damper testing in Portsmouth Point

Staff cleaning versus specialist work

In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.

For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.

How we handle fire damper testing in Portsmouth Point

Ductwork can carry fire and smoke between compartments, and the damper is what stops it. A damper only does its job if the blade can drop fully. Annual drop testing is how you know for the dampers in your building. The work covers fusible link fire dampers, riser dampers and offices and schools, and the jobs we see most are fire dampers that fail to drop shut and corroded dampers in damp risers and plant rooms.

Buildings around Portsmouth Point may have just a handful of dampers, but each one still needs drop testing at least once a year, with a record of every result.

A written report with pictures follows every visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.

Before and after view down the inside of a rectangular extract duct
Location
Portsmouth Point (PO1, PO5, PO12)
Wider area
Portsmouth
Paperwork
Report and pictures after the visit
Quotes
A fixed price before we start
Hours
Nights, weekends or holidays to suit you
Telephone
0345 646 2711
Checked
30 October 2026

Questions from Portsmouth Point

Which fire authority looks after Portsmouth Point?

It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Portsmouth Point. If a fire safety officer audits the building, they may ask for the latest damper test records.

Do you work in villages like Portsmouth Point?

Yes. Villages and rural sites across the South East are part of our work, Portsmouth Point included. Let us know about access, parking and anything unusual about getting there when you book.

What accreditations do you have?

CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We are fully insured and have been trading since 2009.

How do you deal with dampers that cannot be reached?

Any damper we can’t reach is listed on the report so nothing is quietly missed. Fitting an access panel is the usual fix, and we can quote for it.

Do you have a 24/7 line?

Yes, day and night, every day of the year. Office hours are Monday to Friday, 8am to 6pm, and the emergency line covers the rest.

Who is responsible for fire damper testing?

The Regulatory Reform (Fire Safety) Order 2005 puts it on the responsible person. Testing at least yearly and keeping the reports is how they can show it’s being done.

Is TR19 a legal requirement?

No. TR19® itself isn’t law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.

What do you do with what you remove?

Anything we remove is contained as we work and taken away with us, including grease, debris and dirty water. We do not leave it behind.

Why it’s worth doing now in Portsmouth Point

If a damper can’t close, the wall it sits in has a hole in it during a fire. Everything else about the compartment can be right and the duct still lets it down. It’s far better to find that out on a test than in a fire. You choose the date of a planned visit, and a breakdown never asks.

One small site or a whole estate, we price it on the same basis: the work involved, the access and the timing. The price is fixed before work begins.

Why book with us

  • Fixed quotes from a survey or photos
  • We’re fully insured
  • A single point of contact for sites across the South East and London
  • Each visit written up, with photos

Read our cost guide and how to check a contractor.

Fixed quotes for fire damper testing in Portsmouth Point

You will get a fixed price before work begins. It’s based on:

  • Whether we need access equipment or extra panels
  • Parking and loading at the site
  • What state the system is in
  • The times the site is available

We don’t list prices on the website, because each job is priced on what it involves. For a fixed quote, phone us on 0345 646 2711 or send us an email, and we will explain what it covers.

Asking for a quote

To speed up the quote, please include:

  • Anything you’ve noticed, such as smells, noise, drips or poor airflow
  • How we’d reach plant on a roof or in a plant room
  • Wide photos of the system and the area around it
  • Detail shots of panels, filters and grilles

If you need fire damper testing in Portsmouth Point, call 0345 646 2711 or send us an email. Let us know the site type and the opening hours, plus pictures or the previous report if they’re to hand. We usually send a fixed quote within one working day.

The process

When we arrive, we check the system against the survey or the photos you sent. Anything unexpected is raised with you before we go further. From there, it takes anything from a couple of hours for a handful of dampers to a full day for a large building. Tell us about any gates, ladders or locked plant areas at your site near Portsmouth Point when you book.

  1. We gather what’s known about the dampers, from drawings, registers or past reports.
  2. We find every damper and open it up through the access panel.
  3. Fire dampers are drop tested and smoke dampers are run through their controls.
  4. Each one that passes is reset, ready to work.
  5. We report on every damper, with faults and suggested remedials set out.

Before we arrive

  • Find the previous report, if there is one
  • Make sure someone can let us in and lock up afterwards
  • Plan for cooking equipment or plant to be off before we arrive

Get a fixed quote

Want a quote for fire damper testing? Please ring 0345 646 2711 or email us with a few details about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.

Get a price

Related advice

Part by part

Schools, hospitals and care homes

In schools and colleges, testing fits well into holidays and weekends, with no classes to work around.

Fusible link fire dampers

The common fire damper uses a link that holds the blade open. Heat melts the link and the blade falls shut across the duct. Testing means dropping the blade, checking the full close and resetting it.

Multi-site and managed buildings

Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.

The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.

Looking after it afterwards

Good habits slow the build-up between visits. A few tips:

  • Keep damper test reports with the fire safety log
  • Don’t let hatches get painted shut or boarded over
  • Keep to at least yearly testing
  • Keep an eye out for damp around dampers

When we finish, we send a report covering every damper on the visit, with its location and its result. Keep it with the building’s fire safety records so it’s to hand for assessors and insurers.

Keeping to at least annual testing stops small faults turning into failed dampers. A blade that’s just starting to stick is easier to deal with than a seized one.

Fire damper testing in Portsmouth Point: local notes

Portsmouth Point is within about 1 mile of the coast. Dampers close to louvres and air intakes can corrode in sea air, and a corroded blade may not drop. Going by the FSA’s register, there are about 30 schools, colleges and universities, about 41 hospitals, care homes and childcare premises and about 24 hotels, B&Bs and guest houses serving food within 1.5 miles or so of the middle of Portsmouth Point. If any of them has ducted ventilation, its dampers need an annual drop test at least. Hampshire and Isle of Wight Fire and Rescue Service covers Portsmouth Point. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.

If you look after a building near Portsmouth Harbour station with a fire risk assessment due, a damper test with a full record is worth having first. A school like St Jude's CofE Primary School can have any dampers tested over half-term without disturbing lessons. Royal Portsmouth Hospital, about 1 mile north-east of Portsmouth Point, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.

Portsmouth Point is about 2 miles west of Southsea, in Portsmouth. For fire damper testing in and around Portsmouth Point, please call 0345 646 2711 or email us for a fixed quote. Our area covers London and the South East, including Portsmouth Point. We cover 19 places across Portsmouth, from busy centres to quieter spots.

Our technicians cover all of PO1, PO5 and PO12 for fire damper testing and the streets around it. You will find streets such as Park Road, Nobbs Lane and Bath Square, and we cover them all for fire damper testing. We also cover the places around Portsmouth Point: Portsea (1 mile north), Clayhall (1 mile south-west), Haslar (1 mile south-west), Alverstoke (2 miles south-west) and Privett (2 miles west). Further out, we also cover Hilsea (3 miles north-east), Wymering (4 miles north), Paulsgrove (4 miles north), Cosham (4 miles north-east), Drayton (5 miles north-east) and Farlington (5 miles north-east).

Around Portsmouth Point

Around Portsmouth Point, our work takes us to kitchens and buildings near Charter Academy, Portsmouth Grammar School and Bridge Tavern, among other places. Portsmouth Point has its own railway station: Portsmouth Harbour station. Nearby you will also find Southsea Castle (1.2 miles south-east) and Portsmouth Museum And Art Gallery (less than half a mile east). Not far away are Portsdown Hill and Milton Locks.

Map of Portsmouth Point © OpenStreetMap contributors
BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London