Kent · Fire damper testing
Fire damper testing in Nash Street, Kent
Fire damper drop testing and smoke damper testing, with a record for each damper for businesses, landlords and public buildings in Nash Street. CHAS, SafeContractor and ISO 9001, and fully insured.
- Smoke dampers that need testing through their controls
- Fire dampers with no recent test record
- Fire dampers nobody can get to
Do you need fire damper testing in Nash Street?
Over time, dust builds up on the blade, the runners and the spring. If the duct carries cooking vapour, a film of grease adds to it, and either one can hold the blade part-open.
The symptoms we’re asked about most are:
- Fire dampers that haven’t been tested for over a year
- Corroded dampers in damp risers and plant rooms
- Gaps in the fire damper test log
- Dampers flagged on a fire risk assessment
For managed buildings around Meopham station, damper testing can be booked out of hours so tenants are not disturbed.
What your quote should include
- Whether the work can be done while the site is closed
- What paperwork you get at the end
- Whether a survey comes first
- Whether VAT is included
How we handle fire damper testing in Nash Street
Smoke dampers work differently from fire dampers. Smoke dampers are motorised and are opened and closed by a control system, so testing means running them through their controls and confirming every blade travels fully and comes back. Typical jobs include corroded dampers in damp risers and plant rooms and missing or out-of-date damper records, across wall and floor dampers, motorised smoke dampers and riser dampers.
Testing in a small place like Nash Street is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
The paperwork matters as much as the work. Each visit is written up with pictures, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Where
- Nash Street (DA13)
- Wider area
- Kent
- Paperwork
- Photo report after each visit
- Quotes
- Fixed quote, typically within a working day
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Checked
- 30 October 2026
What staff can safely do
Keep a record of what your team does. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Fire damper testing around Nash Street
Going by the FSA’s register, there are about 6 schools, colleges and universities and about 4 care, childcare and hospital premises serving food in Nash Street and the streets around it, up to about 1.5 miles out. If any of them has ducted ventilation, its dampers need an annual drop test at least. Fire safety in Nash Street falls to Kent Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. Gravesham Community Hospital is the nearest hospital, about 3.2 miles north of Nash Street. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Cobham College is about 1.8 miles east), finding every damper is the first job. Hospitals such as Gravesham Community Hospital, about 3.2 miles north, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Nash Street, the same annual testing applies.
Nash Street is about 3 miles south of Gravesend, in Kent. Wherever you are in the DA13 postcode area, we can carry out fire damper testing at your premises. Across Kent, we cover 922 places, Nash Street among them. For sites nearby, see our Maidstone page, about 12 miles away.
Work in DA13 follows the same survey, fixed quote and written report as everywhere else we cover. We also cover the places around Nash Street: Round Street (1 mile east), Longfield Hill (1 mile south-west), Meopham (1 mile south), Sole Street (1 mile south-east) and New Barn (1 mile west). We also work in nearby towns such as Maidstone (12 miles south-east), Dartford (7 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (3 miles north).
Landmarks near Nash Street
Locally, jobs take us to businesses close to Meopham School and Jeskyns and the streets around them. For rail, the closest station is Meopham station, about 0.7 miles south. A little further out are Stone Castle (4.7 miles north-west) and Gravesham Community Hospital (3.2 miles north). Open spaces near Nash Street include Sawyers Lake and Gad's Hill.
Nearby places to Nash Street
Also in Nash Street
Your questions about fire damper testing in Nash Street
Can you work in Nash Street outside opening hours?
Yes, nights and weekends are routine for us. The work in Nash Street can fit around your hours. Tell us your opening hours when you ask for a quote.
Is Nash Street within the area you cover?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
Do you offer maintenance contracts?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.
Are you insured?
Yes. Full insurance covers our work and have been trading since 2009.
Do you have a 24/7 line?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line and we will talk you through the next steps.
How much does fire damper testing cost in Nash Street?
Every site is different, so each gets its own fixed quote. For a quote, call 0345 646 2711, or email photos with the site type, opening hours and a few photos.
Is TR19 a legal requirement?
No. TR19® itself isn’t law; it’s a BESA specification. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
How do you deal with dampers that cannot be reached?
It goes on the report as inaccessible, with the reason. We can fit an access panel so it’s tested on the next visit.
When something else is needed
Not every problem is solved by fire damper testing, and we will tell you before work begins. It will not put right:
- Signing off a building’s overall fire safety
- Fire alarm or control system faults behind a smoke damper
- Gaps in the wall or floor around the damper
If in doubt, call us on 0345 646 2711 or email us and we’ll say what we think before you book.
What the work covers
- Riser dampers
- Hospitals and care homes
- Offices and schools
- Fusible link fire dampers
- Wall and floor dampers
- Motorised smoke dampers
What affects the cost of fire damper testing
Your quote is based on your site. We consider:
- When the work can happen, such as evenings, overnight or weekends
- The condition of the system
- Access, including roofs, risers and ceiling voids
- The size of the system
The price reflects the work, not guesswork. That is why every job is surveyed first, and the price is agreed before we start.
What to send for a quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Your last certificate, test record or report
- Close-ups of filters, grilles, hatches or access panels
- Problems your staff have spotted
- Where the plant sits or the system leaves the building, such as a roof or outside wall
For fire damper testing in Nash Street, ring 0345 646 2711, or email photos. Tell us what kind of premises it is and when it’s open, plus pictures or the previous report if they’re to hand. We normally send a fixed quote within one working day.
How the job changes from site to site
Fusible link fire dampers
The common fire damper uses a link that holds the blade open. When the link reaches its set temperature it melts, and the blade drops to close the duct. Testing means dropping the blade, checking the full close and resetting it.
Access panels
Over time, hatches and panels get covered up. Clear access makes the test quicker and less disruptive.
Between visits
Once we’ve finished, these simple steps help:
- Diary the annual test well ahead
- Add new dampers to the register as they’re fitted
- Keep damper test reports with the fire safety log
- Report leaks or condensation near ductwork quickly
Any damper that failed is listed with the reason, along with an offer to repair or replace them. Once the work is done, the damper is tested again and the record updated.
Keep a damper register: location, type, last test date and result. It stops dampers getting lost as the building changes.
The process
The visit has three parts: set-up, the treatment itself and the sign-off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with pictures. The middle part takes longest, which takes from an hour or two in a small building to several visits on a large estate. We agree a date with you, plan the drive to Nash Street and turn up when the site is quiet.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- We close everything up and send the results in a report.
Getting ready for the visit
- Mention any sign-in, permit or induction we need
- Plan for cooking equipment or plant to be off before we arrive
- Dig out any earlier paperwork for the system
How to get a quote
Getting a quote doesn’t take long. Call or email with a few details and you’ll normally have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.