Hampshire · Fire damper testing
Fire and smoke damper testing in Longparish
Looking for fire damper testing in Longparish? We survey first, give you a fixed quote and work around your opening hours, then sign off with a report and photos.
- Dampers clogged with dust or grease
- Gaps in the fire damper test log
- Dampers that stick or will not close fully
FAQs for Longparish
Can you come to Longparish after we close?
Yes, evening, overnight and weekend work is normal for us. The work in Longparish can fit around your hours. When you phone us on 0345 646 2711 or email us, mention when the site is quiet.
Who enforces fire safety at workplaces in Longparish?
That is Hampshire and Isle of Wight Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Do we need to close while you work?
Not normally. We need the work area to ourselves while we’re on site, so the visit goes in a quiet slot.
Do you have a 24/7 line?
Yes. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line and we will talk you through the next steps.
Do you carry out smoke damper testing?
Yes. Smoke dampers are motorised, so we test them by operating them through their controls. Each one is checked for full travel and the result recorded.
What do you do with what you remove?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. None of it is left on site.
How much does fire damper testing cost in Longparish?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before work begins.
How often should fire dampers be tested?
According to BESA guidance, dampers should be tested when they’re installed and then at least once a year. Spring-operated dampers need annual testing as a minimum.
Fire damper testing in Longparish
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Longparish. If there’s a damper register or a set of drawings, share it with us, and we’ll plan the testing around when the building is in use. The work covers hospitals and care homes, fusible link fire dampers and offices and schools, and people most often call us about dampers hidden with no access panel or hatch and dust or grease build-up on damper blades.
Testing in a small place like Longparish is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
The report is your system’s health record: a dated account with photos of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Where
- Longparish (SP11)
- Region
- Hampshire
- Paperwork
- Written report with photos
- Price
- A fixed quote up front
- Working hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Nearby places to Longparish
More services for Longparish
Part by part
Smoke dampers
If a smoke damper won’t operate when signalled, it goes on the report as a failure, with a note of what we found.
Access panels
A damper can only be tested if it can be reached. Most need an access panel in the duct and a hatch in the ceiling or wall.
Fixed quotes for fire damper testing in Longparish
A fixed price needs a few facts first. We check:
- Whether it’s a one-off visit or part of a schedule
- When the work can happen, such as evenings, overnight or weekends
- Access, including roofs, risers and ceiling voids
- The condition we find in the survey
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all play a part.
Helping us quote
You don’t need the technical terms. Just send:
- The roof, plant room or outside wall the system runs to
- Detail shots of panels, filters and grilles
- When the site is open and when it’s quiet
- Your last certificate, test record or report
The quickest way to a quote is to send pictures: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
The process
We work around your opening hours, not the other way round. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. The timing of a visit to Longparish is set by you, and the travel is our side of the planning.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
Getting ready for the visit
- Arrange a key holder or contact on site
- Tell us the best time to work, such as after service or at a weekend
- Let us know about parking and loading
Get a fixed quote
Here’s what helps us quote: the address, the type of site and when it’s open, pictures of the system and any previous report or certificate. Once you have those, give us a ring on 0345 646 2711 or email us.
Related advice
Fire damper testing around Longparish
For Longparish, the closest hospital is Andover War Memorial Hospital, roughly 5.1 miles west. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. We cover Longparish, about 59 miles from central London, as part of our work across London and the South East. The visit is fixed around your opening hours, not ours.
The nearest hospital, Andover War Memorial Hospital, is about 5.1 miles west; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly. Site managers at schools such as Longparish Church of England Primary School typically find the summer break the easiest time for ceiling work like damper testing.
Longparish is about 5 miles east of Andover, in Hampshire. We carry out fire damper testing for businesses, landlords and public buildings in Longparish and the rest of Hampshire. Longparish is one of 683 places in Hampshire we cover for fire damper testing. There’s also a page for Southampton, about 19 miles away.
We cover every part of the SP11 postcode area for fire damper testing and the streets around it. Local streets include Mill Lane and Southside Road, and we cover them all for fire damper testing. Other places close to Longparish include Middleton (1 mile west), Barton Stacey (2 miles south), Egypt (3 miles south-east), Sutton Scotney (3 miles south-east) and Hunton (4 miles south-east). Within a short drive, we also cover Basingstoke (13 miles east), Winchester (10 miles south), Andover (5 miles west), Chandler's Ford (14 miles south), Romsey (15 miles south) and Tadley (15 miles north-east).
Local landmarks in Longparish
Around Longparish, our work takes us to kitchens and buildings near The Cricketers Inn, among other places. The closest station to Longparish is Whitchurch (Hampshire) station, about 3.5 miles north-east. A little further out are Finkley Down Farm Museum (3.6 miles north-west) and Andover War Memorial Hospital (5.1 miles west). The countryside around Longparish includes Anton Lakes and Mill Lake.
What fire damper testing can’t fix
In fairness, some problems need a different fix:
- Ductwork crossing a fire wall with no damper fitted
- Signing off a building’s overall fire safety
- Holes around ductwork in fire-resisting walls
If in doubt, phone us on 0345 646 2711, or send details by email and we will say what we think before you book.
What the work covers
- Fusible link fire dampers
- Offices and schools
- Riser dampers
- Motorised smoke dampers
- Wall and floor dampers
- Hospitals and care homes
Between visits
Good habits slow the build-up between visits. A few tips:
- Keep the damper register up to date after any building work
- Do not let anything obstruct a damper’s blade
- Keep to at least yearly testing
- Act on failed dampers rather than leaving them on file
Tell other contractors where the dampers are, and ask them not to run cables through or wedge them. Anything they disturb should be checked again.
A simple register of every damper helps a great deal: location, type, last test date and result. It means nothing gets forgotten when staff or contractors change.
Managing agents and facilities teams in Longparish
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
From a single site to a large estate, the standard is the same: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
In-house cleaning or a specialist?
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.