Hampshire · Fire damper testing
Fire damper testing in Lee, Hampshire
Specialist fire damper testing for Lee: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Motorised smoke dampers due for testing
- Dampers overdue for their annual drop test
- Gaps in the fire damper test log
Fire damper testing for kitchens and businesses in Lee
The idea behind drop testing is straightforward: the blade is released, checked for a full close and reset. We do this for buildings in Lee and across Hampshire, keeping a log for each damper so there’s a history to look back on. If you have damper actions from a fire risk assessment and fire dampers nobody can get to, we can put it right, from offices and schools, riser dampers and hospitals and care homes onwards.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, and the dampers in them are easily forgotten. A first test typically starts with finding them all.
A written report with pictures follows each visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Where
- Lee (SO51)
- Region
- Hampshire
- Reporting
- Report and photos after the visit
- Quotes
- Fixed quote, usually within a working day
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Why deal with it now?
A sticking blade caught on an annual test can be a small repair. Left for years, corrosion and build-up can turn it into a full damper replacement. It’s simpler to plan the work at Lee now than to arrange it in a hurry later.
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. You get a fixed price before we start, so you know where you stand.
What you get with us
- Trading since 2009
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Out-of-hours work and a 24/7 emergency line
- Photo reports with every job
Questions from Lee
Will you come out to Lee?
Yes, Lee is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
Does the sea air around Lee make a difference to fire damper testing?
It can. Lee is within about 3 miles of the coast, and salt air speeds up corrosion. If corrosion is stopping a blade, the report says so and remedial work can be quoted.
Can testing be done without disrupting the building?
Yes, the visit is arranged to suit the site. We can work evenings, overnight or at weekends where daytime access is difficult.
Can you quote from pictures?
Yes, where the photos show enough. If not, a site survey comes first, and the quote follows that.
Do we lose a day’s trading?
Not normally. We need the work area to ourselves while we are on site, so the visit goes in a quiet slot.
What do you need from me for a quote?
Some pictures and a quick description of the system plus the address and your hours. If we need more, we’ll ask.
Are you fully insured?
Yes. We carry full insurance and have been trading since 2009.
Is there a survey before the work?
Yes. Every job is surveyed first, from your photos and details, or with a visit where needed. Then you get a fixed quote.
What else we do in Lee
Staff cleaning versus specialist work
Staff cleaning does not replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Fire damper testing around Lee
The coast is only about 3 miles from Lee. Corrosion is a known cause of damper failure, and coastal air adds to the risk near intakes and louvres. Fire safety in Lee falls to Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. For Lee, the closest hospital is Romsey Community Hospital, roughly 2.3 miles north. Where patients or residents may need help to leave a building, working dampers matter all the more.
The nearest hospital, Romsey Community Hospital, is about 2.3 miles north; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly.
Lee is about 2 miles south of Romsey, in Hampshire. Across the SO51 area, we can take on fire damper testing. Lee is one of 683 places in Hampshire we cover for commercial clients.
We work across the SO51 postcode area for fire damper testing and the roads nearby. Whether your site is on Lee Lane and Lee Church Lane or anywhere close by, our technicians can take on the work. Other places close to Lee include Ashfield (1 mile east), Toothill (1 mile east), Upton (1 mile south-east), Nursling (1 mile south-east) and Rownhams (2 miles south-east). We also work in nearby towns such as Winchester (10 miles north-east), Eastleigh (6 miles east), Fareham (15 miles south-east), Totton (3 miles south), Chandler's Ford (5 miles north-east) and Hedge End (9 miles east).
Near you in Lee
The nearest railway station is Romsey station, roughly 2.4 miles north of the centre. Well-known places in the area include King Johns House (2.3 miles north) and Romsey Community Hospital (2.3 miles north). The countryside around Lee includes Testwood Lakes.
What a clean will not put right
An honest diagnosis matters more to us than a booking, so here’s what fire damper testing will not do:
- Dampers that were never installed where they’re needed
- Designing the building’s fire compartments
- Holes around ductwork in fire-resisting walls
If in doubt, call us on 0345 646 2711, or email photos and we will say what we think.
What we work on in Lee
- Motorised smoke dampers
- Riser dampers
- Fusible link fire dampers
- Hospitals and care homes
- Wall and floor dampers
- Offices and schools
Looking after it afterwards
Good habits slow the build-up between visits. Our tips:
- Tell contractors where dampers are before they start work
- Update the register when ductwork changes
- File every damper report where your assessor can find it
- Keep cables and fixings away from damper blades
Dampers we couldn’t reach are listed with the reason, such as no access panel or a blocked hatch. We can fit access panels so they can be tested next time.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. It makes sense to plan duct cleaning and damper testing together.
When to call us in Lee
Dust settles on damper blades, runners and springs over the years. If the duct carries cooking vapour, a film of grease adds to it, and either can stop the blade dropping fully.
What we’re most often called out for:
- Smoke dampers with no recent test
- Missing or out-of-date damper records
- Fire dampers nobody can get to
- Fire dampers that haven’t been tested for over a year
School buildings such as Oasis Academy Lord's Hill are typically tested in the holidays, wherever they have dampers.
Before you book anyone
- Whether the quote shows VAT
- If they look at the system before pricing
- Whether the work can be done while the site is closed
- What’s included in the scope, part by part
The process
We start by comparing what we find with the survey or your photos. If anything is different, we talk it through with the person on site before carrying on. From there, it takes a couple of hours for a few dampers, and a day or more across a big site. Pictures of the system and its access let us plan the work in Lee before we set off.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- We close everything up and send the results in a report.
Preparing for the visit
- Clear the space around the work
- Mention any parking or loading restrictions
- Tell us the best time to work, such as after service or at a weekend
How to get a quote
Getting a quote doesn’t take long. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Read more
How we price fire damper testing
The quote reflects the site in front of us. We consider:
- How many systems or sites are involved
- How easy every part is to reach
- Site requirements such as sign-in and permits
- Working hours and out-of-hours timing
What you pay reflects the actual work. That’s why we survey first, from photos or on site, and the price is agreed before any work starts.
What we need to know
When you call or email, these details help:
- Detail shots of panels, filters and grilles
- The roof, plant room or outside wall the system runs to
- Wide pictures of the system and the area around it
- Your opening hours and when the area is out of use
Want a quote for fire damper testing? Please ring 0345 646 2711 or use the quote form with a few details about the site. We will explain what we’d do and send a fixed quote before you commit to anything.