Kent · Fire damper testing
Fire damper inspection in Henhurst
Fire damper testing across Henhurst and nearby, booked around your opening hours and finished with a written report and pictures.
- Fire dampers that haven’t been tested for over a year
- Smoke dampers that need testing through their controls
- Dirty dampers that may not close
How we handle fire damper testing in Henhurst
Testing finds the dampers that won’t close. When one sticks, has a damaged link or is corroded, we report it and offer remedials rather than leaving you with a problem and no fix. We’re often asked to deal with corroded dampers in damp risers and plant rooms and fire dampers that haven’t been tested for over a year, across wall and floor dampers, offices and schools and fusible link fire dampers.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.
For insurers and inspectors, the record counts. So every job comes with a written report and photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Place
- Henhurst (DA12)
- Region
- Kent
- Paperwork
- Report and photos after the visit
- Price
- A fixed price before work begins
- When we work
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
What your team can do, and what needs us
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That is our job.
Do you need fire damper testing in Henhurst?
Over time, dust builds up on the blade, the runners and the spring. Where the duct carries grease or cooking vapour, grease coats them too, and either one can hold the blade part-open.
What we’re most often called out for:
- Damper actions from a fire risk assessment
- Fire dampers that haven’t been tested for over a year
- Corroded dampers in damp risers and plant rooms
- Buildings with no damper register
School buildings such as Singlewell Primary School are typically tested in the holidays, wherever they have dampers.
Questions to ask before booking
- Exactly which parts of the system are covered
- Proof of accreditation you can verify
- Whether the quote shows VAT
- Whether the price is fixed
Towns and villages near Henhurst
What else we do in Henhurst
Landlords, agents and facilities managers
We regularly work with managing agents. Send the address, what’s needed and how access works and we will come back with a fixed quote.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
Questions from Henhurst
Do you do school damper testing in Henhurst in the summer holidays?
Yes, holiday work suits schools best. There are about 10 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Henhurst. Send us your term dates when you ring 0345 646 2711 or use the quote form, and we will fit the work in.
Can you come to Henhurst after we close?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Tell us your opening hours when you ask for a quote.
What if parts of the system can’t be reached?
We record them on the report, with pictures where possible, and we tell you what would make it reachable, for example new access panels.
What happens if a damper fails its test?
We record the damper as failed, with the reason, such as a sticking blade, corrosion or a damaged link. We offer remedials to repair or replace it, and test it again afterwards.
How often do fire dampers need drop testing?
BESA guidance calls for testing by a competent person at least once a year. A test on completion of installation comes first.
Who has the duty to keep fire dampers working?
The Regulatory Reform (Fire Safety) Order 2005 puts it on the responsible person. Annual testing by a competent person, with written records, is a practical way to show the duty is being met.
Can one contract cover all our sites?
Yes. You deal with one contact for every site across London and the South East, and visits can be set on a regular cycle.
Will we get a certificate for the dampers?
Our paperwork is a test report, not a certificate of compliance. It lists each damper, the result and any remedials needed.
Honest limits
A few issues sit outside what this work can do:
- Fire alarm or control system faults behind a smoke damper
- Fire risk assessments, which need a fire risk assessor
- Holes around ductwork in fire-resisting walls
If you are not sure, just call 0345 646 2711 or email us and we’ll give you a straight answer before you book.
Parts of the system we cover
- Hospitals and care homes
- Wall and floor dampers
- Riser dampers
- Offices and schools
- Fusible link fire dampers
- Motorised smoke dampers
What fire damper testing looks like in Henhurst
Going by the FSA’s register, there are about 10 schools, colleges and universities and about 4 hospitals, care homes and childcare premises serving food within about 1.5 miles of central Henhurst. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Henhurst’s nearest hospital, Gravesham Community Hospital, is about 3 miles north. Hospitals are a good example of a building with fire dampers across many floors and departments. Henhurst is covered by Kent Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
Cobham College, about 1 mile south-east, is one of the historic houses near Henhurst, and older buildings converted to new uses often have ventilation added later. Hospitals such as Gravesham Community Hospital, about 3 miles north, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Henhurst, the same annual testing applies.
Henhurst is about 2 miles south of Gravesend, in Kent. For fire damper testing in and around Henhurst, it’s easy to get a fixed quote: please give us a ring on 0345 646 2711 or email us. We work across South East England and London, Henhurst included. Across Kent, we cover 922 places, and Henhurst is one of them. You can also see our page for Maidstone, roughly 11 miles from Henhurst.
Fire damper testing in DA12 is surveyed, quoted and booked the same way as anywhere else. Close by, we work in Singlewell or Ifield (1 mile north-west), Istead Rise (1 mile west), Gravesend (2 miles north), Denton (2 miles north) and Northfleet Green (2 miles north-west). We also work in nearby towns such as Maidstone (11 miles south-east), Dartford (8 miles west), Sevenoaks (12 miles south-west), Tonbridge (15 miles south), Northfleet (3 miles north-west) and Swanley (9 miles west).
Near you in Henhurst
In Henhurst, that means kitchens and buildings near Jeskyns, The George Inn and Thamesview School and the streets around them. Henhurst’s nearest station is Sole Street station, about 1.3 miles south. Other landmarks nearby include Gravesham Museum (2.8 miles north) and Gravesham Community Hospital (3 miles north). Not far away are Sawyers Lake and Gad's Hill.
Aftercare tips
So the system stays in good health:
- Add new dampers to the register as they’re fitted
- Brief other trades about dampers in ceilings and risers
- Diary the annual test well ahead
- Store test records alongside the fire risk assessment
After testing, you get a report listing each of the fire and smoke dampers we tested, with where it is and whether it passed. Keep it with the building’s fire safety records so it’s to hand for assessors and insurers.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. Duct cleaning and damper testing can be planned side by side.
What affects the quote in Henhurst
The survey tells us what the work involves. We look at:
- Parking and loading at the site
- The times the site is available
- Site rules, permits and inductions
- How many systems or sites are involved
You won’t find a price list here, because each job is priced on what it involves. For a fixed quote, phone us on 0345 646 2711 or drop us a line, and we will explain what it covers.
What we need to know
A few details help us quote accurately. When you get in touch, it helps to send:
- The roof, plant room or outside wall the system runs to
- Wide pictures of the system and the area around it
- Problems your staff have spotted
- Close-ups of filters, grilles, hatches or access panels
For fire damper testing in Henhurst, call us on 0345 646 2711 or drop us a line. Let us know the site type and the opening hours, plus pictures or the previous report if they’re to hand. A fixed quote usually follows within one working day.
What we do, step by step
A visit follows the same order every time: protect the area, make the system safe, carry out the fire damper testing, clear away and leave you the report. The visit itself takes from an hour or two in a small building to several visits on a large estate. Photos of the system and how to reach it help us plan a visit to Henhurst.
- We go through the damper schedule and any previous faults.
- Each damper is found and checked for access.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- We report the results and offer remedials on failed dampers.
Before we arrive
- Plan for cooking equipment or plant to be off before we arrive
- Find the previous report, if there is one
- Let us know when the site is closed or quiet
Getting a quote
Quoting starts with a diagnosis, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work, before work begins.