Surrey · Fire damper testing
Fire Damper Testing in Hammer
Fire damper testing for Hammer and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Buildings with no damper register
- Dust or grease build-up on damper blades
- Corroded dampers in damp risers and plant rooms
Fire damper testing in Hammer, done properly
Ductwork can carry fire and smoke between compartments, and the damper is what stops it. A damper only does its job if the blade can drop fully. Regular drop testing is how that gets checked for the dampers in your building. The work covers wall and floor dampers, offices and schools and fusible link fire dampers, and the jobs we see most are rusted damper blades and springs and dampers clogged with dust or grease.
In a village or hamlet like Hammer, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
We have been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Location
- Hammer (GU27)
- Wider area
- Surrey
- Records
- Report and photos after the visit
- Quote
- A fixed price before work begins
- Hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Fire damper testing around Hammer
The FSA’s food hygiene register lists about 6 schools, colleges and universities and about 10 care, childcare and hospital premises with registered kitchens or food service across Hammer and its immediate surroundings (about a mile and a half). Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Hammer is covered by Surrey Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty. Hammer’s nearest hospital, Haslemere and District Hospital, is about 2 miles east. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.
Site managers at schools such as Woolmer Hill School normally find the summer break the easiest time for ceiling work like damper testing. Hospitals such as Haslemere and District Hospital, about 2 miles east, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Hammer, the same annual testing applies.
Hammer is about 9 miles south of Farnham, in Surrey. Hammer gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Our Surrey coverage runs to 395 places, and Hammer is one of them. Our Guildford page covers sites nearby (14 miles or so).
All of GU27 is within our area for fire damper testing, from the main roads to the quietest streets. We cover sites on Hammer Lane, Moor Road and Copse Road and the roads around them. Neighbouring places we cover for fire damper testing include Woolmer Hill (1 mile south), Hammer Bottom (1 mile west), Shottermill (1 mile east), Bramshott Chase (1 mile north) and Linchmere (1 mile south-west). Within a short drive, we also cover Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (11 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
What’s near Hammer
In Hammer, that means kitchens and buildings near The Prince of Wales pub and Camelsdale Primary School and the streets around them. For rail, the closest station is Haslemere station, roughly 1.5 miles east of the centre. Other landmarks nearby include Haslemere and District Hospital (2 miles east). Green spaces nearby include Lynchmere Commons and Wheeler's Down.
When it’s something else
To be straight with you, some problems need a different fix:
- Faults in the alarm or building controls that signal smoke dampers
- Deciding where dampers should be fitted
- Gaps in the wall or floor around the damper
Not sure which it is? You can call us on 0345 646 2711, or send details by email and we will tell you honestly.
Where we work
- Fusible link fire dampers
- Hospitals and care homes
- Wall and floor dampers
- Offices and schools
- Riser dampers
- Motorised smoke dampers
Different parts, different methods
Access panels
Over time, hatches and panels get covered up. Clear access makes the test quicker and less disruptive.
Fusible link fire dampers
Most fire dampers are held open by a fusible link. When the link reaches its set temperature it melts, and the blade drops to close the duct. We release the blade, check it closes fully and reset it.
What staff can safely do
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, next to our reports.
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Fixed quotes for fire damper testing in Hammer
Every site gets its own quote. These are the things that affect it:
- The times the site is available
- Parking and loading at the site
- The condition we find in the survey
- Any permits to work or inductions
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re not sure what’s needed, give us a ring on 0345 646 2711 or drop us a line and we will give you an honest view and a fixed quote.
Asking for a quote
To speed up the quote, please include:
- Any access panels or hatches you can see
- The paperwork from the last visit, if you have it
- The postcode and the type of business
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Quoting starts with a diagnosis, from your photos and details or, where that isn’t enough, a survey on site. Then we send a fixed price, before we start.
FAQs for Hammer
Can fire dampers in schools around Hammer be tested in the holidays?
Yes. The holidays are the usual time for school work. Around Hammer, the Food Standards Agency lists about 6 schools and colleges with registered kitchens within a mile and a half or so. Just phone us on 0345 646 2711 or drop us a line with your term dates and we’ll plan around them.
Do you cover smaller places like Hammer?
Yes, smaller places are covered as well as towns. Photos of the system and directions to the site help us plan the visit.
What if a damper has no access panel?
It’s noted as inaccessible rather than skipped. Once there’s a panel or a way through the ceiling, it can be tested.
How much notice should we give?
Earlier is better, especially for out-of-hours work. We normally quote within one working day, and emergencies are covered by our 24/7 line.
Can you test out of hours?
Yes, we plan around how the building is used. Out-of-hours and weekend work is available where daytime access is difficult.
Can you quote from photos?
Yes, if we can see what we need. Otherwise, we book a survey at a time that suits the site, then a fixed quote.
Where does the waste go?
It’s contained and taken away. We collect grease, debris and waste water as we go rather than letting it spread.
Who is the responsible person?
That depends on who controls the premises. The Fire Safety Order 2005 puts the duty on the responsible person, which may be the employer, owner, landlord, facilities manager or managing agent.
The process
Everything the job needs comes with us, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. The visit takes a morning or an afternoon for a small number of dampers, longer where there are many. Rural roads and tight entrances are worth telling us about before a visit to Hammer.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
How to prepare
- Let us know when the site is closed or quiet
- Mention any locked doors, roof access or ceiling voids
- Dig out any earlier paperwork for the system
How to get a quote
Getting a quote doesn’t take long. Call or email with a few details and you’ll normally have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Advice
More services for Hammer
Why it’s worth doing now in Hammer
A sticking blade caught on an annual test can be a small repair. Years of corrosion and dirt can mean the whole damper needs replacing instead. Out of sight is the usual reason a rural system goes too long without attention.
One small site or a whole estate, we price it on the same basis: the work involved, the access and the timing. The price is fixed before any work starts.
Why book with us
- Work around your opening hours, with 24/7 emergency cover
- One contact for all your sites in London and the South East
- Fixed quotes, typically within one working day
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Read what affects the cost or our accreditations and certificates.
Landlords, agents and facilities managers
We regularly work with managing agents. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.