Medway · Fire damper testing
Fire and smoke damper testing in Halling
We cover Halling for fire damper testing. Fixed quotes, work around your opening hours and photo reports as standard.
- Fire dampers that fail to drop shut
- Fire damper items raised by an assessor
- Missing or out-of-date damper records
Your questions about fire damper testing in Halling
Can you work in Halling outside opening hours?
Yes, nights and weekends are routine for us. The site is handed back ready to open. Tell us your opening hours when you ask for a quote.
Who is the fire and rescue service for Halling?
Kent Fire and Rescue Service is the fire and rescue service for Halling. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Can you fix fire dampers that fail?
We note the failure and what we found. We can then repair or replace the damper as a remedial job with a fresh test at the end.
What is TR19?
TR19® is the BESA specification for keeping ventilation systems clean. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Can you price the work without visiting?
Yes, where the photos show enough. Otherwise, we book a survey at a time that suits the site, then a fixed quote.
What paperwork do we get after testing?
What you receive is a written report of each test for every damper on the visit. Failures are set out with the remedials we’d suggest.
What do you do to protect the area?
Protection goes down first: floor sheeting and covers over nearby surfaces and equipment. We tidy up and take our waste away before we leave.
How long does fire damper testing take?
It takes anything from a couple of hours for a handful of dampers to a full day for a large building. Access is the biggest factor, and we will give you an idea when we quote.
How we handle fire damper testing in Halling
The idea behind drop testing is straightforward: we release the blade, watch it close fully, then reset it. We test dampers for sites in Halling and the rest of Medway, logging each one so the record builds year on year. The work covers offices and schools, hospitals and care homes and wall and floor dampers, and the jobs we see most are smoke dampers with no recent test and dampers that can’t be reached without an access panel.
For a building in or near Halling, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Place
- Halling (ME2)
- Region
- Medway
- Records
- Photo report after every visit
- Quotes
- Fixed quote, normally within a working day
- Hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Multi-site and managed buildings
Facilities teams in offices, schools and healthcare sites book us too in Halling and across Medway. Larger estates can be phased building by building around the people who use them.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Fire damper testing in Halling: local notes
There are about 5 schools, colleges and universities and about 3 care, childcare and hospital premises on the FSA’s food hygiene register within about 1.5 miles of central Halling. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. Halling’s nearest hospital, St. Catherine's Hospital, is about 3.4 miles north-east. Hospitals are a good example of a building with fire dampers across many floors and departments. The fire and rescue service for Halling is Kent Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
For managed buildings around Halling station, damper testing can be booked out of hours so tenants are not disturbed. St. Catherine's Hospital, about 3.4 miles north-east of Halling, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
Halling is about 3 miles south-west of Rochester, in Medway. Whatever kind of site you run in Halling, fire damper testing is something we can help with. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. Across Medway, we cover 68 places, and Halling is one of them. For sites nearby, see our Maidstone page (7 miles or so).
All of ME2 is covered for fire damper testing, from the main roads to the quietest streets. Whether your site is on High Street, Kent Road and Essex Road or a nearby road, we can help. Other places close to Halling include Wouldham (1 mile east), Upper Halling (1 mile south-west), North Halling (1 mile north), Holborough (1 mile south) and Peters Village (1 mile south-east). Larger places within reach include Gillingham (6 miles east), Chatham (4 miles east), Rochester (3 miles north-east), Rainham (7 miles east), Strood (3 miles north-east) and Luton (4 miles east).
Landmarks near Halling
We work in commercial kitchens and buildings around Holborough Marshes, The Homeward Bound pub and The Holmesdale School and the streets around them. Halling has its own railway station: Halling station. A little further out are St. Catherine's Hospital (3.4 miles north-east) and Rochester Castle (3.5 miles north-east). Not far away are Blue Bell Hill and Ranscombe Farm.
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We will take a look and send you a fixed quote.
What affects the quote in Halling
The quote reflects the site in front of us. We consider:
- Site requirements such as sign-in and permits
- Travel, parking and unloading
- The condition we find in the survey
- When the work can happen, such as evenings, overnight or weekends
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we will explain each part.
What to send for a quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
- Any symptoms, from odd noises to smells or leaks
- Where the site is and what kind of site it is
For fire damper testing in Halling, call 0345 646 2711 or drop us a line. Let us know the site type and the opening hours, and send pictures or your last report if you can. We normally send a fixed quote within one working day.
What we’re called out for in Halling
Other trades work around dampers all the time. A cable run through the blade path, a knocked link or a wedged blade is enough to stop a damper closing.
Signs it’s time to call us include:
- Dust or grease build-up on damper blades
- Damper actions from a fire risk assessment
- Dampers hidden with no access panel or hatch
- Motorised smoke dampers due for testing
For schools like Halling Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
What to look for in a quote
- How areas they cannot reach will be recorded
- How VAT is shown on the quote
- Whether a survey comes first
- Exactly which parts of the system are covered
The process
When we arrive, we check the system against the survey or the photos you sent. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Photos of the system and how to reach it help us plan a visit to Halling.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- We find every damper and open it up through the access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Dampers that close fully are reset and left open.
- The results go into a report, with failed dampers and remedials listed.
Preparing for the visit
- Dig out any earlier paperwork for the system
- Clear loose items from the work area
- Make sure someone can let us in and lock up afterwards
How to get a quote
Some systems can be priced from pictures; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
Read more
Aftercare tips
Results last longer with the right care. We suggest:
- Keep to at least yearly testing
- Update the register when ductwork changes
- Keep cables and fixings away from damper blades
- Warn anyone working in ceiling voids about the dampers
After testing, you get a report listing each of the fire and smoke dampers we tested, with where it is and whether it passed. File it with your fire safety log so it’s ready when your assessor or insurer asks.
Clean ductwork means less dust and grease reaching the dampers. It makes sense to plan duct cleaning and damper testing together.
Why deal with it now?
Until a damper has been dropped, you can’t say whether it works. Testing turns it into a known pass or a known fault, with remedials offered for anything that fails, which is far easier to plan for. Planning a trip to Halling ahead is easier for everyone than a rushed one.
You won’t find a price list here, because the cost depends on the site in front of us. Call for a fixed quote, and we’ll talk you through it.
Why us?
- Full insurance on every job
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Ventilation hygiene specialists since 2009
- Evenings, overnight and weekends, plus 24/7 emergency callout
Read what affects the cost or our accreditations.