Hampshire · Fire damper testing
Fire and smoke damper testing in Fullerton
Specialist fire damper testing for Fullerton: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Motorised smoke dampers due for testing
- Rusted damper blades and springs
- Dampers overdue for their annual drop test
When it’s something else
A few issues sit outside what this work can do:
- Sign-off of the whole building’s fire safety
- Dampers that were never installed where they’re needed
- Faults in the alarm or building controls that signal smoke dampers
If in doubt, give us a ring on 0345 646 2711, or send details by email and we will say what we think.
What we work on in Fullerton
- Motorised smoke dampers
- Wall and floor dampers
- Riser dampers
- Offices and schools
- Fusible link fire dampers
- Hospitals and care homes
Fire damper testing in Fullerton, done properly
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Fullerton. Send us the damper schedule or the drawings if you have them, and we will plan the visit around the building’s hours. Common call-outs are for buildings with no damper register and corroded dampers in damp risers and plant rooms, across motorised smoke dampers, fusible link fire dampers and offices and schools.
In a village or hamlet like Fullerton, there may be only a few buildings with fire dampers. Each damper still needs testing at least once a year.
For insurers and inspectors, the record counts. That’s why every job is written up in a report with photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Location
- Fullerton (SP11)
- Wider area
- Hampshire
- Reporting
- Written report with photos
- Quotes
- A fixed quote up front
- When we work
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
What happens if it’s left?
Leaving damper testing for another year does not make the dampers any more likely to work. The guidance from BESA is at least once a year, so a missed year leaves a gap in the record too. In a place like Fullerton, ductwork and fans are easy to forget until something goes wrong.
What you pay reflects the actual work. That’s why every job is surveyed first, and why the quote is fixed before work begins.
Why us?
- Every visit written up, with photos
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- CHAS, SafeContractor and ISO 9001
- In business since 2009
See what affects the cost or our accreditations and certificates.
How we price fire damper testing
Before we fix a price, we need to know a few things. We check:
- Access, including roofs, risers and ceiling voids
- The condition we find in the survey
- Working hours and out-of-hours timing
- How big the system is
A single site or a whole portfolio, we price it on the same basis: what needs doing, how we get to it and when. The price is fixed before we start.
Helping us quote
Before you ask for a quote, gather:
- Where the site is and what kind of site it is
- Any symptoms, from odd noises to smells or leaks
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The times we could work without disrupting the site
For fire damper testing in Fullerton, give us a ring on 0345 646 2711 or email us. Tell us what kind of premises it is and when it’s open, plus pictures or the previous report if they’re to hand. We usually send a fixed quote within one working day.
Between visits
To keep the system working properly between visits:
- Do not let hatches get painted shut or boarded over
- Never wedge or tie a damper open
- Book the next test before the year runs out
- Get remedials done soon after a failed test
Any damper that failed is listed with the reason, and we can quote for remedials. Once the work is done, the damper is tested again and the record updated.
Deal with leaks and condensation near dampers quickly. Rusted parts are one of the main reasons dampers fail to close.
Signs you need fire damper testing in Fullerton
Fusible links and springs don’t last for ever. A link can be damaged, painted over or swapped for the wrong one, and a tired spring may not drive the blade home, and that only becomes clear during a drop test.
Common reasons sites call us are:
- Fire dampers with no recent test record
- Dampers clogged with dust or grease
- Dampers that stick or won’t close fully
- Smoke dampers that need testing through their controls
Andover War Memorial Hospital, about 4.6 miles north of Fullerton, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
Comparing quotes
- Whether they recommend a next date
- Whether the price is fixed
- What hours they’ll be on site
- What insurance they carry
Fire damper testing in Fullerton: local notes
Andover War Memorial Hospital is the nearest hospital, about 4.6 miles north of Fullerton. Healthcare buildings rely on fire compartments to protect people who cannot easily move, and dampers keep those compartments sealed. Fullerton is covered by Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
For buildings in and around Fullerton, every damper is drop tested, reset and recorded.
Fullerton is about 4 miles south of Andover, in Hampshire. Fullerton gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where needed and a written report with pictures. Fullerton is one of 683 towns, villages and districts in Hampshire we cover for fire damper testing. Our Southampton page covers sites nearby (16 miles or so).
All of SP11 is within our area for fire damper testing, from busy streets to back roads. We also cover the places around Fullerton: Cottonworth (1 mile north-east), Chilbolton (1 mile east), Leckford (1 mile south), Wherwell (1 mile north-east) and Wherwell Wood (2 miles north). Further out, we also cover Winchester (9 miles south-east), Eastleigh (14 miles south), Andover (4 miles north), Chandler's Ford (12 miles south), Romsey (11 miles south) and Hyde (9 miles south-east).
Local landmarks in Fullerton
Typical jobs here are in premises near Longstock Park and the streets around them. For rail, the closest station is Andover station, about 4.3 miles north. A little further out are Andover War Memorial Hospital (4.6 miles north). Green spaces nearby include Anton Lakes and Mill Lake.
Fullerton: your questions answered
Do you work in villages like Fullerton?
Yes, smaller places are covered as well as towns. Photos of the system and directions to the site help us plan the visit.
Do you work at weekends in Fullerton?
Yes, evening, overnight and weekend work is normal for us. Your customers, staff or residents in Fullerton needn’t be disturbed. Just phone us on 0345 646 2711, or send details by email with your opening times and we will plan around them.
Do you carry out smoke damper testing?
Yes. Smoke dampers are motorised, so we test them by operating them through their controls. We check every blade moves fully and record the outcome.
How far ahead should we book?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
How often do fire dampers need drop testing?
BESA guidance is that fire dampers are tested on completion of installation and at least annually after that. For spring-operated dampers, once a year is the minimum.
How long does fire damper testing take?
As a guide, it takes a few hours for a single floor, with bigger buildings phased over more than one visit. It comes down mainly to how many dampers there are and how easy they are to get to.
Is there a survey before the work?
Yes, always. We diagnose before we treat: the survey tells us what the system needs and how to reach it, and the quote is based on that.
What happens to the waste?
It leaves the site with us at the end of the visit. During the work, it’s contained to keep the area clean.
In-house cleaning or a specialist?
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That’s our job.
How it works
Everything the job needs comes with us, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. The visit takes a morning or an afternoon for a small number of dampers, longer where there are many. For a village or hamlet like Fullerton, tell us about narrow lanes, gates and parking when you book.
- First we check the schedule and the last set of results.
- We locate every damper and note any we cannot reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- We report the results and offer remedials on failed dampers.
How to prepare
- Allow time for equipment near the work to be turned off and cool down
- Move anything stored near the system
- Tell us about site rules, permits or sign-in
How to get a quote
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.