Surrey · Fire damper testing
Fire damper testing in Frensham, Surrey
Our technicians work in Frensham on fire damper testing. Out-of-hours visits, a fixed quote and a written report with pictures as standard.
- Corroded dampers in damp risers and plant rooms
- Fire damper items raised by an assessor
- Fire dampers with no recent test record
How the job changes from site to site
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. Testing goes floor by floor so nothing is missed.
Access panels
If we can’t reach a damper, it goes on the report as inaccessible. We can fit access panels so it’s tested next time.
Fire damper testing for kitchens and businesses in Frensham
For every damper, we record where it is, whether it passed and the state it’s in. Passes are reset and left ready to work, while failures are flagged with what we found. You end up with a clear record to keep with your fire safety documents. The work covers offices and schools, motorised smoke dampers and hospitals and care homes, and common reasons people get in touch are dampers clogged with dust or grease and rusted damper blades and springs.
In a village or hamlet like Frensham, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
Every visit ends with a written report and photos, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Frensham (GU10)
- Region
- Surrey
- Paperwork
- Photo report after each visit
- Price
- A fixed price before any work starts
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
How the visit works
Night work is normal for us. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. On site, the work takes from an hour or two in a small building to several visits on a large estate. If the van will struggle with a lane or gateway near Frensham, let us know and we’ll plan around it.
- First we look at any damper register, drawings or earlier test reports.
- Each damper is located and reached through its access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
How to prepare
- Let us know about parking and loading
- Move anything stored near the system
- Have your last certificate or report to hand
How to get a quote
To help us quote: the address, the type of site and when it’s open, a few photos and the last certificate or report, if there is one. Then phone us on 0345 646 2711, or email photos.
Advice
What we’re called out for in Frensham
Other trades work around dampers all the time. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
Look out for these warning signs:
- Dampers clogged with dust or grease
- Dampers that stick or won’t close fully
- Dampers flagged on a fire risk assessment
- Corroded dampers in damp risers and plant rooms
Site managers at schools such as St Mary's CofE Aided Infant School usually find the summer break the easiest time for ceiling work like damper testing.
What your quote should include
- Whether a survey comes first
- What insurance they carry
- What’s included in the scope, part by part
- Proof of accreditation you can verify
Managing agents and facilities teams in Frensham
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We are happy to deal with either side, and the report can go to both.
Records are where multi-site compliance often slips. Each visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.
Frensham buildings and fire safety
Food Standards Agency data includes about 3 schools, colleges and universities within 1.5 miles or so of the middle of Frensham. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Frensham’s nearest hospital, Chase Community Hospital, is about 5.1 miles south-west. Hospitals are a good example of a building with fire dampers across many floors and departments. The fire and rescue service for Frensham is Surrey Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Farnham Castle is about 3.6 miles north), finding every damper is the first job. Hospitals such as Chase Community Hospital, about 5.1 miles south-west, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Frensham, the same annual testing applies.
Frensham is about 3 miles south of Farnham, in Surrey. We carry out fire damper testing for commercial premises of every kind in Frensham and the rest of Surrey. Frensham is one of 395 places in Surrey where we work for commercial clients. We also work in Guildford, around 11 miles away.
Work in GU10 is surveyed, quoted and booked the same way as anywhere else. That includes premises on The Street and Peakfield and nearby roads. Other places close to Frensham include Millbridge (1 mile north), Shortfield Common (1 mile north), Crosswater (1 mile south-east), Tilford Reeds (2 miles north-east) and Tilford Common (2 miles east). Larger places within reach include Guildford (11 miles north-east), Woking (14 miles north-east), Camberley (12 miles north), Farnham (3 miles north), Frimley (11 miles north) and Haslemere (6 miles south-east).
Around Frensham
We work in commercial kitchens and buildings around The Flashes and Edgeborough School and the streets around them. For rail, the closest station is Farnham station, about 3.2 miles north of the centre. Other landmarks nearby include Farnham Castle (3.6 miles north) and Museum of Farnham (3.3 miles north). Green spaces nearby include Culverswell Hill and Farnham Heath.
Towns and villages near Frensham
More services for Frensham
Frensham: your questions answered
Will you come out to Frensham?
Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.
Can you work in Frensham outside opening hours?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Frensham needn’t be disturbed. When you ring 0345 646 2711, or email photos, mention when the site is quiet.
Do you look at the system first?
Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.
Do you test smoke dampers as well?
Yes. Every smoke damper is driven through its controls and checked for full movement. If someone else looks after the controls, we plan the timing with you.
Can you come out in an emergency?
Yes. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we will advise on what to do next.
Who has the legal duty for fire safety?
The Fire Safety Order 2005 calls them the responsible person: normally the employer or whoever controls the premises. Landlords, facilities managers and managing agents can also hold responsibility.
Is a quote from pictures possible?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Larger or hidden systems need a survey on site first.
Do we need to close while you work?
Not typically. The area we’re working in has to be out of use while we are there, so we book a time when it would be closed anyway.
Looking after it afterwards
Once we have finished, these simple steps help:
- Brief other trades about dampers in ceilings and risers
- Make sure access panels stay clear and usable
- Store test records alongside the fire risk assessment
- Act on failed dampers rather than leaving them on file
After testing, you get a report listing each of the fire and smoke dampers we tested, with where it is and whether it passed. File it with your fire safety log so it’s ready when your assessor or insurer asks.
A simple register of every damper helps a great deal: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.
What your team can do, and what needs us
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
What fire damper testing cannot fix
Some problems need a different service or another trade:
- Approving the building’s fire strategy
- Designing the building’s fire compartments
- Fire alarm or control system faults behind a smoke damper
If in doubt, give us a ring on 0345 646 2711 or drop us a line and we will say what we think.
Parts of the system we cover
- Riser dampers
- Offices and schools
- Motorised smoke dampers
- Wall and floor dampers
- Fusible link fire dampers
- Hospitals and care homes