Essex · Fire damper testing
Fire and smoke damper testing in Curling Tye Green
Looking for fire damper testing in Curling Tye Green? We survey first, give you a fixed quote and work around your opening hours, finishing with a written report and pictures.
- Gaps in the fire damper test log
- Fire dampers with no recent test record
- Dirty dampers that may not close
What a clean will not put right
An honest diagnosis matters more to us than a booking, so here’s what fire damper testing won’t do:
- Fire risk assessments, which need a fire risk assessor
- Missing dampers that a designer needs to specify
- Fire-stopping gaps around the duct where it passes through the wall
Not sure which it is? You can call 0345 646 2711 or drop us a line and we will tell you honestly before you book.
Parts of the system we cover
- Hospitals and care homes
- Wall and floor dampers
- Offices and schools
- Motorised smoke dampers
- Fusible link fire dampers
- Riser dampers
Fire damper testing in Curling Tye Green, done properly
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Curling Tye Green. Send us the damper schedule or the drawings if you have them, and we’ll plan the visit around the building’s hours. If you are dealing with fire dampers that haven’t been tested for over a year and damper actions from a fire risk assessment, we can help, from offices and schools, wall and floor dampers and fusible link fire dampers onwards.
Somewhere as small as Curling Tye Green, fire dampers are typically found in a school, a care home, a hotel or a converted building, wherever there is one. Each damper still needs testing at least once a year.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Curling Tye Green (CM9)
- Region
- Essex
- Reporting
- Written report with pictures
- Price
- Fixed quote, normally within a working day
- Working hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Towns and villages near Curling Tye Green
More services for Curling Tye Green
What the work involves, part by part
Schools, hospitals and care homes
Buildings where people sleep or need help to leave rely heavily on compartments holding fire back. Annual damper testing is part of keeping that in place.
Offices and retail
In shared buildings, some dampers sit inside tenants’ space. Access to each area is planned with whoever manages the building.
Managing agents and facilities teams in Curling Tye Green
Multi-site operators often want one contractor and one number. We work across London and the South East, so visits at different addresses can be planned together and kept on a regular cycle.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we will send a fixed quote.
Fire damper testing in Curling Tye Green: local notes
The coast is only about 3 miles from Curling Tye Green. Corrosion is a known cause of damper failure, and coastal air adds to the risk near intakes and louvres. At about 35 miles from central London, Curling Tye Green sits well inside the area we cover. Visits are booked around your hours, evenings and weekends included. Essex County Fire and Rescue Service covers Curling Tye Green. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
For schools like Plume School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Curling Tye Green is about 2 miles west of Maldon, in Essex. Every kind of commercial site in Curling Tye Green, fire damper testing is something we can help with. We can work out of hours so the site keeps running. Across Essex, we cover 644 places, and Curling Tye Green is one of them. You can also see our page for Chelmsford, about 7 miles away.
We cover every part of the CM9 postcode area for fire damper testing and the roads nearby. Fire damper testing is available to premises on Manor Road and Curling Tye Lane and the roads around them. Neighbouring places we cover for fire damper testing include Woodham Walter (1 mile west), Langford (2 miles north-east), Ulting (2 miles north-west), Woodham Mortimer (2 miles south-west) and Maldon (2 miles east). Within a short drive, we also cover Colchester (15 miles north-east), Chelmsford (7 miles west), Basildon (14 miles south-west), Braintree (11 miles north), Canvey Island (15 miles south) and Billericay (12 miles south-west).
What’s near Curling Tye Green
Around Curling Tye Green, our work takes us to kitchens and buildings near The Cats pub and Plume Library. For rail, the closest station is Hatfield Peverel station, about 3.8 miles north-west of the centre. Not far away are Maldon Wick.
How the visit works
We are used to working while the site is closed. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. On site, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. A quick note on how to find the site and where to park makes a visit to Curling Tye Green run smoothly.
- First we check the schedule and the last set of results.
- We locate every damper and note any we can’t reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Getting ready for the visit
- Tell us about site rules, permits or sign-in
- Let us know how we reach the system, including roofs, risers and plant rooms
- Find the previous report, if there is one
Ask for a quote
To help us quote: the address, the type of site and when it’s open, a few photos and the last certificate or report, if there is one. Then give us a ring on 0345 646 2711, or send details by email.
Related advice
What your team can do, and what needs us
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
What we are called out for in Curling Tye Green
In most buildings, Curling Tye Green included, dampers are out of sight in ceiling voids, risers and service shafts. If there’s no hatch to reach them, they slip off everyone’s list, and anything nobody can get to goes untested.
Signs it’s time to call us include:
- Blades that jam part-way when released
- Dampers that can’t be reached without an access panel
- Damper actions from a fire risk assessment
- Dirty dampers that may not close
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Danbury Place is about 3.8 miles west), finding every damper is the first job.
Questions to ask before booking
- Proof of insurance
- How areas they cannot reach will be recorded
- How VAT is shown on the quote
- When they can work, and whether that is outside your opening hours
Questions from Curling Tye Green
Do you work in villages like Curling Tye Green?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
Which fire service covers Curling Tye Green?
Fire safety enforcement in Curling Tye Green is handled by Essex County Fire and Rescue Service. If a fire safety officer audits the building, they may ask for the latest damper test records.
Do you test smoke dampers as well?
Yes. Every smoke damper is driven through its controls and checked for full movement. Where a controls contractor needs to be involved, we arrange it with you.
What about areas you cannot get to?
They’re listed in the report, never skipped quietly. You’ll know exactly which parts weren’t reached and why, along with a quote to put access in.
Do you work with multi-site operators?
Yes. Tell us the addresses and what each needs and we will quote them together.
How long does fire damper testing take?
A visit takes a couple of hours for a few dampers, and a day or more across a big site. Large buildings can be split over several visits, so call 0345 646 2711, or email photos for a quote.
What happens if a damper fails its test?
Failed dampers are reported and we can quote to repair or replace them. Once fixed, the damper is drop tested again and the record updated.
What should I send you?
The site address, the type of premises and your opening hours, plus photos of the system and your last certificate or report if you have one.
Looking after it afterwards
Simple habits between visits make a real difference. Our advice:
- Store test records alongside the fire risk assessment
- Warn anyone working in ceiling voids about the dampers
- Act on failed dampers rather than leaving them on file
- Do not let hatches get painted shut or boarded over
Tell other contractors where the dampers are, and that they mustn’t tie, wedge or obstruct them. If a damper has been disturbed, have it tested again.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Corrosion is a common reason blades stick.