Hampshire · Extract fan cleaning
Extract Fan Cleaning in Shipton Bellinger
Extract fan cleaning for Shipton Bellinger, with a survey first and a report with photos at the end. Call for a fixed quote.
- Fat spreading onto the roof or wall by the fan
- A smell of hot grease from the extract
- A fan left out of previous cleans
About our extract fan cleaning in Shipton Bellinger
The fan is cleaned as part of every full TR19® Grease clean, but a fan can also need attention on its own, especially when it has started to vibrate or sound rough. Where only the fan is cleaned, the report says so. The work covers fan housings, discharge points and axial fans, and the jobs we see most are a fan coated in grease inside its housing and a fan shaking on its mounts.
In a village or hamlet like Shipton Bellinger, the kitchens that need extract cleaning are usually a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease, whatever the size of the place.
We have been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
- Where
- Shipton Bellinger (SP9)
- Region
- Hampshire
- Paperwork
- TR19® certificate and photo report
- Quote
- A fixed price before we start
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Checked
- 30 October 2026
What we are called out for in Shipton Bellinger
Fans that are hard to reach are often the ones that get missed. If it wasn’t included in past cleans, it may hold years of grease, and the report will show it.
Any of these means the system needs a check-up:
- Grease around the motor and its mounts
- A fan shaking on its mounts
- A fan that hums, whines or rumbles
- Less air being pulled from the kitchen
Where a hall near Church of St Peter, or anywhere in Shipton Bellinger, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
What to look for in a quote
- How VAT is shown on the quote
- What hours they’ll be on site
- If the quote is a fixed price or an estimate
- How areas they can’t reach will be recorded
Different parts, different methods
Roof-mounted fans
Roof fans sit at the top of the riser. We clean them where they can be safely reached, and anything we can’t reach is recorded.
Wall fans
With little duct before them, wall fans collect grease fast. They can need regular attention, which grease readings will show.
Why act early in Shipton Bellinger
A fan that sounds rough in Shipton Bellinger is often telling you the extract needs a clean. If the fan is coated, the duct before it usually is too so a full TR19 clean may be due. A fault that closes a site in a village like Shipton Bellinger affects everyone who depends on it.
The price reflects the work, not guesswork. That’s why every job is surveyed first, and why the quote is fixed before work begins.
Why us?
- Accredited under CHAS and SafeContractor, with ISO 9001
- Fully insured
- Ventilation hygiene specialists since 2009
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
What extract fan cleaning looks like in Shipton Bellinger
Shipton Bellinger is covered by Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. Environmental health officers from Test Valley council inspect food businesses in Shipton Bellinger. Extraction counts as kitchen equipment, so its condition can come up on the day. Keeping each certificate and photo report on file helps show the extract is looked after.
School kitchens, at schools like Shipton Bellinger Primary School for example, are normally cleaned in the holidays so no lunches are lost.
Shipton Bellinger is in Hampshire. Every kind of commercial site in Shipton Bellinger, we can take on extract fan cleaning. Visits can be booked for evenings, overnight or weekends so trading isn’t interrupted. Our Hampshire coverage runs to 683 places, and Shipton Bellinger is one of them. There’s also a page for Southampton, roughly 23 miles from Shipton Bellinger.
Here we cover the SP9 postcode area for extract fan cleaning. You will find streets such as High Street, Gardeners Green and Hedges Close, and we cover them all for extract fan cleaning. If your site is just outside Shipton Bellinger, we cover Tidworth (2 miles north), Perham Down (3 miles north-east), Kimpton (3 miles east), Great Shoddesden (4 miles north-east) and Ludgershall (4 miles north-east). Within a short drive, we also cover Andover (8 miles east), Whitchurch (15 miles east), East Anton (9 miles east), Picket Piece (10 miles east), Picket Twenty (10 miles east) and Finkley Down (10 miles east).
Local landmarks in Shipton Bellinger
Around Shipton Bellinger, our work takes us to kitchens and buildings near The Boot Inn and The Wellington Academy. The closest station to Shipton Bellinger is Grateley station, roughly 3.4 miles south-east. Nearby you will also find Ludgershall Castle (4.2 miles north-east). Green spaces nearby include Beacon Hill and Winterbourne Downs RSPB reserve.
Nearby places to Shipton Bellinger
What else we do in Shipton Bellinger
Honest limits
We won’t sell you work that doesn’t address the problem, so here are the limits:
- A fan that will not start
- Wiring faults to the fan
- A fan that’s too small for the system (a design question)
Not sure which it is? You can ring 0345 646 2711 or email us and we’ll tell you honestly before booking.
What we work on in Shipton Bellinger
- Discharge points
- Roof-mounted fans
- In-line fans
- Fan housings
- Axial fans
- Centrifugal fans
What affects the quote in Shipton Bellinger
Sites vary more than people expect. The main factors:
- The scale of the work
- Whether it’s a one-off visit or part of a schedule
- Whether several sites go on one quote
- How easy every part is to reach
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote, and the price is fixed before work begins.
What to send for a quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Any access panels or hatches you can see
- The paperwork from the last visit, if you have it
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
To help us quote: the address, the type of site and when it’s open, a few photos and the last certificate or report, if there is one. Then call 0345 646 2711, or send details by email.
What happens on the day
Night work is normal for us. Evenings, nights and weekends are when much of our work happens, so the site can open as normal afterwards. The visit itself takes an hour or two for most single fans. We agree a date with you, plan the drive to Shipton Bellinger and turn up when the site is quiet.
- The fan is found and its type, access and isolation checked.
- It’s isolated so it cannot run while we work.
- We scrape the heavy grease from the blades and housing.
- Blades, housing and surrounds are degreased with care around the electrics.
- We reassemble, run and photograph the fan.
Preparing for the visit
- Name a contact who can let us in at the agreed time
- Let us know about permits to work or site inductions
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Ask for a quote
Want a quote for extract fan cleaning? Please call 0345 646 2711 or use the quote form and tell us about the site. We’ll talk you through the work and give you a fixed quote before anything is booked.
Related advice
Between visits
To keep the system working properly between visits:
- Report grease escaping from the fan
- Don’t turn the fan off mid-service
- Never cook with a filter missing
- Listen for new noises or vibration from the fan
When we have finished, the fan is reassembled and run. Anything we notice, like noise, vibration or a worn part, goes on the report, so you can plan any repair.
Keep the route to the fan clear. A fan that can be reached safely is a fan that gets cleaned, whether it’s on a roof, in a ceiling or on a wall.
Questions from Shipton Bellinger
Can you get to a site in Shipton Bellinger?
Yes, we work in villages as well as towns, and Shipton Bellinger is covered. Let us know about access, parking and anything unusual about getting there when you book.
Which fire and rescue service is responsible for Shipton Bellinger?
It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Shipton Bellinger. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
Do we lose a day’s trading?
Not typically. The area we are working in has to be out of use while we’re there, so the visit goes in a quiet slot.
How much does extract fan cleaning cost in Shipton Bellinger?
The cost depends on the size of the system, its condition, access and timing. Call for a fixed quote, typically ready within one working day.
Who is the responsible person?
It depends on the building. The Fire Safety Order 2005 puts the duty on the responsible person, which may be the employer, owner, landlord, facilities manager or managing agent.
Are you accredited?
We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
Do you offer maintenance contracts?
Yes. We run scheduled maintenance contracts, set at the interval the system needs. Each report recommends when the next visit should be.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.