Bracknell Forest · Extract fan cleaning

Extract fan cleaning in Hanworth, Bracknell Forest

Extract fan cleaning for commercial sites in Hanworth and across Bracknell Forest. CHAS, SafeContractor and ISO 9001, and fully insured.

  • A fan left out of previous cleans
  • A motor area thick with grease
  • A fan that no longer moves enough air

Extract fan cleaning in Hanworth

Looking after it afterwards

Here’s the after-treatment advice, short and simple:

  • Keep each photo report with the maintenance log
  • Keep access to the fan clear
  • Run the extract throughout cooking
  • Tell us if the extract feels weaker

File the photo report with your other extract records. It shows the fan’s condition at the time of the clean, which helps if anything changes later.

Keep the whole system on its cleaning cycle. Regular full cleans keep the fan from building up heavy deposits, in line with BESA guidance.

Extract fan cleaning in Hanworth

The extract fan is the heart of the system: it pulls air from the canopy, through the duct and out of the building. Whatever grease slips past the filters and duct reaches the fan and we clean it off. If you’re dealing with a fan that hums, whines or rumbles and grease around the motor and its mounts, we can put it right.

In a smaller place like Hanworth, many kitchens sit in older buildings or later extensions, where the duct may cross a roof void or climb an outside wall. Long horizontal runs like that hold grease and need access panels to reach.

The paperwork matters as much as the work. Each visit is written up with pictures, covering the work done, any areas we couldn’t access and a recommended next date. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.

Inside an extract duct: heavy deposits on the left, cleaned metal on the right
Place
Hanworth (RG12, RG40)
Wider area
Bracknell Forest
Reporting
TR19® certificate and photo report
Quote
A fixed quote up front
When we work
After hours by arrangement; emergencies any time
Call
0345 646 2711
Checked
30 October 2026

Landlords, agents and facilities managers

Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.

Keeping records across a portfolio is half the battle. Every visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.

Staff cleaning versus specialist work

If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We can diagnose it and quote.

Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.

How the visit works

Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes an hour or two for one fan, longer when it’s hard to reach. Tell us about any gates, ladders or locked plant areas at your site near Hanworth when you book.

  1. Diagnosis first: we look for grease, noise and vibration.
  2. With the fan isolated, the housing is opened.
  3. The impeller is cleaned blade by blade so it runs balanced.
  4. Housing, outlet and the area around the motor are cleaned.
  5. The fan goes back into service with a report on its condition.

Preparing for the visit

  • Mention any sign-in, permit or induction we need
  • Let us know how we reach the system, including roofs, risers and plant rooms
  • Clear loose items from the work area

Getting a quote

Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.

Get a price

Related advice

What affects the quote in Hanworth

Some jobs are bigger than they look, and some smaller. The main factors:

  • A single visit or a regular plan
  • The number of sites or systems
  • Whether we need access equipment or extra panels
  • What state the system is in

Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you’re unsure, phone us on 0345 646 2711 or drop us a line and we’ll give you an honest view and a fixed quote.

What we need to know

The more you tell us, the more accurate the quote. With your enquiry, please include:

  • How we’d reach plant on a roof or in a plant room
  • Any symptoms, from odd noises to smells or leaks
  • Close-ups of filters, grilles, hatches or access panels
  • Wide pictures of the system and the area around it

If you need extract fan cleaning in Hanworth, phone us on 0345 646 2711 or send us an email. Tell us what kind of premises it is and when it’s open, and send pictures or your last report if you can. We typically send a fixed quote within one working day.

What extract fan cleaning cannot fix

To be straight with you, there are a few things this work will not fix:

  • A dirty duct upstream of the fan
  • Wiring faults to the fan
  • A cracked or broken impeller (it needs replacing)

If you’re not sure, just ring 0345 646 2711 or send us an email and we will give you a straight answer.

Where we work

  • Axial fans
  • In-line fans
  • Roof-mounted fans
  • Fan housings
  • Discharge points
  • Centrifugal fans

FAQs for Hanworth

Do you work in villages like Hanworth?

Yes. Villages and rural sites across the South East are part of our work, Hanworth included. Let us know about access, parking and anything unusual about getting there when you book.

Do you work overnight in Hanworth?

Yes, evening, overnight and weekend work is normal for us. The work in Hanworth can fit around your hours. When you ring 0345 646 2711, or send details by email, mention when the site is quiet.

Do you offer extract fan cleaning separately?

Yes, if the fan needs it. We’ll often suggest checking the duct too, as a greasy fan normally means a greasy duct, but the choice is yours.

What happens to the waste?

Waste is contained during the work and removed when we leave, including grease, debris and dirty water. None of it is left on site.

How long will it take to clean the fan?

One easily reached fan is quick, while fans on high roofs or in tight voids take longer. It’s done while the kitchen is closed.

Why is my extract fan noisy?

A common cause is grease. Uneven build-up on the blades throws the fan off balance, causing vibration and noise. If cleaning doesn’t, the bearings or motor may need attention.

Do you repair extract fans as well as clean them?

Fan repair and replacement is part of what we do. If we find wear or damage, we’ll explain it and give you a fixed quote.

What do you do to protect the area?

Protection goes down first: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.

Grease, kitchens and Hanworth

Food Standards Agency data counts about 30 cafés, restaurants and staff canteens and about 15 sandwich bars and takeaways within 1.5 miles or so of the middle of Hanworth. Any of those kitchens with a canopy relies on a fan that gathers grease as it runs. Hanworth sits within the area of Royal Berkshire Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. In Hanworth, food businesses are inspected by environmental health officers from Bracknell Forest council. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Keeping each certificate and photo report on file helps show the extract is looked after.

Term dates shape school work: for a school like The Pines School, an extract clean fits neatly into a half-term or summer break. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Pinewood Hospital is the nearest hospital to Hanworth, about 1.5 miles west. Church and community hall kitchens, near St Michael and St Mary Magdalene's Church or anywhere around Hanworth, are easy to forget, but their extracts collect grease like any other.

Hanworth is about 1 mile south of Bracknell, in Bracknell Forest. We provide extract fan cleaning for commercial premises of every kind in Hanworth and the rest of Bracknell Forest. 41 places in Bracknell Forest are on our list, from busy centres to quieter spots. There’s also a page for Reading, roughly 10 miles from Hanworth.

Extract fan cleaning in RG12 and RG40 follows the same survey, fixed quote and written report as everywhere else we cover. Local streets include Hanworth Road, Waterham Road and Crowthorne Road, all of which we cover for extract fan cleaning. We also cover the places around Hanworth: Birch Hill (1 mile east), Wooden Hill (1 mile west), Great Hollands (1 mile north-west), Home Farm (1 mile west) and Crown Wood (1 mile north-east). We also work in nearby towns such as Sandhurst (3 miles south), Lawrence Hill (3 miles north), Binfield (3 miles north), Quelm Park (3 miles north), Whitegrove (3 miles north-east) and College Town (4 miles south).

Local landmarks in Hanworth

We work in commercial kitchens and buildings around Easthampstead Park Community School, The Brakenhale School and Golden Retriever pub, among other places. The nearest railway station is Bracknell station, roughly 1.5 miles north. Other landmarks nearby include Pinewood Hospital (1.5 miles west) and Small Arms School Corps Weapons Collection (3.6 miles south). Not far away are Wildmoor Heath and Heath Lake.

Map of Hanworth © OpenStreetMap contributors

What the work involves, part by part

Impellers and blades

Grease on the leading edges of the blades cuts the fan’s efficiency. Scraping and degreasing them restores their shape, so the fan can run as intended.

Fan housings and motors

Belt-driven fans have a drive belt and pulleys that can collect grease. Belts and pulleys are checked and cleaned where safe for your records.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London