Essex · Extract fan cleaning
Extract fan cleaning in Beacon Hill, Essex
Extract fan cleaning across Beacon Hill and nearby, timed so the site keeps working and finished with a written report and pictures.
- Less air being pulled from the kitchen
- A heavily greased fan housing
- Hot, greasy smells near the fan
Extract fan cleaning in Beacon Hill, done properly
Not all extract fans are the same: fans on the roof, fans built into the duct run, and fans on an outside wall. Each is isolated and opened in its own way and the survey shows us how to reach it. The work covers fan housings, axial fans and roof-mounted fans, and people most often call us about hot, greasy smells near the fan and a fan that no longer moves enough air.
In a village or hamlet like Beacon Hill, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease, whatever the size of the place.
Insurers, fire officers and environmental health officers all look at records. That’s why every job is written up in a report with photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Place
- Beacon Hill (CM8, CM9)
- Wider area
- Essex
- Records
- Certificate plus before-and-after photos
- Price
- A fixed price before work begins
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
FAQs for Beacon Hill
Will you come out to Beacon Hill?
Yes, Beacon Hill is part of our area, however small the site. Photos of the system and directions to the site help us plan the visit.
Can school kitchens in Beacon Hill be cleaned in the holidays?
Yes, out-of-term visits are normal for schools. Around Beacon Hill, the Food Standards Agency lists about 3 schools and colleges with registered kitchens within a mile and a half or so. Booking early in the term gives the best choice of holiday dates.
Does the law say we must follow TR19?
No. TR19® itself is not law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
What information do you need?
The site address, the type of premises and your opening hours, along with a few pictures and any previous report.
Do you look at the system first?
Yes. Every job is surveyed first, from your photos and details, or with a visit where necessary. A fixed quote follows.
Can one contract cover all our sites?
Yes. We work across South East England and London, so we can schedule a run of sites as one programme. Every site has its own report.
Where does the waste go?
We take it away at the end of the visit. During the work, it’s contained to keep the area clean.
How long does extract fan cleaning take?
Allow a few hours where there are several fans or heavy deposits. We’ll confirm the time when we quote.
Aftercare tips
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Keep records of every fan clean
- Notice when the fan starts to sound different
- Don’t turn the fan off mid-service
- Keep the grease filters clean and in place
We take away the grease and dirty water from the fan clean. Wherever the fan is, the area around it is cleaned down.
Run the fan throughout cooking. Grease settles faster when the air stops moving, so keeping it running helps keep it clean.
Landlords, agents and facilities managers
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
Keeping records across a portfolio is half the battle. Every visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.
What extract fan cleaning can’t fix
Extract fan cleaning can’t fix everything, and we’d rather say so up front. It won’t put right:
- An impeller that’s bent or split
- Wiring faults to the fan
- An undersized fan that cannot cope
Not sure which it is? You can phone us on 0345 646 2711, or send details by email and we will tell you honestly.
What the work covers
- Fan housings
- Axial fans
- Discharge points
- Roof-mounted fans
- In-line fans
- Centrifugal fans
What affects the cost of extract fan cleaning
The quote reflects the site in front of us. We consider:
- Any permits to work or inductions
- Where the site is and how we reach it
- Access, including roofs, risers and ceiling voids
- What state the system is in
You won’t find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
Helping us quote
Photos let us diagnose from a distance. The most useful are:
- Photos showing the whole system and its surroundings
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- When the site is open and when it’s quiet
- Close-ups of filters, grilles, hatches or access panels
Need a price for extract fan cleaning? Please call us on 0345 646 2711 or email us and tell us about the site. We’ll talk you through the work and send you a fixed quote before anything is booked.
How the visit works
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes an hour or two for one fan, longer when it’s hard to reach. The timing of a visit to Beacon Hill is set by you, and the travel is our side of the planning.
- First we check the fan’s condition and how it sounds.
- With the fan isolated, the housing is opened.
- The impeller is cleaned blade by blade so it runs balanced.
- Housing, outlet and the area around the motor are cleaned.
- We run the fan and note its condition in the photo report.
Getting ready for the visit
- Allow time for equipment near the work to be turned off and cool down
- Mention any sign-in, permit or induction we need
- Arrange a key holder or contact on site
Get a fixed quote
We don’t publish a price list, because no two systems are the same. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, call us on 0345 646 2711 or send us an email.
Related advice
How the job changes from site to site
Roof-mounted fans
Roof fans sit at the top of the riser. We clean them where they can be safely reached, with any limits noted.
Impellers and blades
Grease on the leading edges of the blades cuts the fan’s efficiency. Scraping and degreasing them restores their shape, so the fan can run as intended.
Why it’s worth doing now in Beacon Hill
Cleaning the fan in Beacon Hill now is a short job: it takes a few hours where there are several fans or heavy deposits. Waiting adds vibration, wear and a harder clean. It’s simpler to plan the work at Beacon Hill now than to arrange it in a hurry later.
One small site or a whole estate, we price it on the same basis: the work involved, the access and the timing. You will have a fixed price before work begins.
What you get with us
- Every job surveyed first
- Fully insured
- Accredited under CHAS and SafeContractor, with ISO 9001
- Out-of-hours work and a 24/7 emergency line
Places near Beacon Hill
What else we do in Beacon Hill
Kitchen extracts in Beacon Hill
Food Standards Agency data counts about 3 restaurants, cafés and canteens across Beacon Hill and its immediate surroundings (about a mile and a half). Where they cook under a canopy, an extract fan is pulling grease-laden air through its blades every service. Essex County Fire and Rescue Service covers Beacon Hill. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. In Beacon Hill, food businesses are inspected by environmental health officers from Maldon council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Keeping each certificate and photo report on file helps show the extract is looked after.
If you look after a school kitchen, at a school such as Great Totham Primary School or anywhere near Beacon Hill, the holidays are the usual time for a TR19® clean. A TR19® clean in Beacon Hill doesn’t stop at the filters: the plenum, ductwork, fan and discharge are cleaned too.
Beacon Hill is about 2 miles south-east of Witham, in Essex. Every kind of commercial site in Beacon Hill, we can take on extract fan cleaning. We can work out of hours so trading is not interrupted. Beacon Hill is one of 644 towns, villages and districts in Essex we cover for commercial clients. You can also see our page for Chelmsford, about 9 miles away.
Our technicians cover all of CM8 and CM9 for extract fan cleaning and the roads nearby. If you need extract fan cleaning at premises on Beacon Hill, Braxted Road and Maclarens or anywhere close by, we can help. If your site is just outside Beacon Hill, we cover Wickham Bishops (1 mile south-west), Great Totham (1 mile south), Great Braxted (1 mile north-east), Broad Street Green (2 miles south) and Langford (2 miles south-west). Within a short drive, we also cover Colchester (12 miles north-east), Chelmsford (9 miles west), Braintree (9 miles north-west), Maldon (4 miles south), Rayleigh (14 miles south) and Wickford (14 miles south-west).
Around Beacon Hill
We work in commercial kitchens and buildings around Whet Mead, The Green Man pub and Maltings Academy. The closest station to Beacon Hill is Witham station, about 2.5 miles north-west of the centre. Nearby you will also find Anchor Press Museum (3.6 miles north-east). The countryside around Beacon Hill includes Shut Heath Wood.