Isle of Wight · Ductwork cleaning
Ductwork Cleaning in Winford
Cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels for businesses, landlords and public buildings in Winford. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- Smells of old cooking grease from the ductwork
- Gaps where access panels were never fitted
- High readings at a recent grease test
How it works
Before we leave, we walk the area with whoever is on site. We point out anything that couldn’t be reached or needs a follow-up, and it goes on the report too. The visit takes a few hours for a short run, longer for long runs and tall risers. Rural roads and tight entrances are worth telling us about before a visit to Winford.
- We trace the duct and find every way in.
- Grease thickness is measured at set points.
- Out of hours, the area is protected and the access panels opened.
- Heavy deposits come out by hand, then each section is degreased.
- We close up, re-test, photograph and record anything out of reach.
Before we arrive
- Tell us about site rules, permits or sign-in
- Dig out any earlier paperwork for the system
- Move anything stored near the system
Get a fixed quote
To get a fixed quote, call 0345 646 2711, or email photos with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. You’ll typically have a quote within one working day.
Related advice
Ductwork cleaning for kitchens and businesses in Winford
Nobody sees duct grease building, so nobody notices it until something goes wrong. A flare-up drawn up from the range can light it, and fire can then run along the ductwork to other parts of the building. Removing it is the whole point. We’re often asked to deal with years of grease along the duct floor and grease seeping out of the duct seams, on access panels, bends and junctions and multi-storey ducts.
Somewhere as small as Winford, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Place
- Winford (PO36)
- Region
- Isle of Wight
- Reporting
- Certificate and photo report
- Price
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Nearby places to Winford
Also in Winford
Why act early in Winford
Under BESA guidance, the mean grease level should stay at or below 200 microns between cleans. Anywhere that reaches 500 microns or more needs immediate spot cleaning. Leaving the duct makes those limits harder to keep to. Rural sites can’t always move to another kitchen or room when something fails.
What you pay reflects the actual work. That is why every job is surveyed first, and why the quote is fixed before we start.
What you get with us
- We’re fully insured
- Every visit written up, with pictures
- Ventilation hygiene specialists since 2009
- A single point of contact for sites across the South East and London
Read our cost guide or how to check a contractor.
Winford questions
Which fire authority looks after Winford?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Winford. TR19® is not law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Which environmental health team covers Winford?
Food hygiene inspections in Winford are carried out by Isle of Wight council. It helps to keep the extract cleaning records with your food safety paperwork, so they’re ready if asked for.
Can you fit access panels in our ductwork?
Yes, as part of our fits and repairs work. Panels go where they give the best access to sections that couldn’t be reached, and we will recommend where.
How much notice do you need?
Earlier is better, particularly for night and weekend visits. Quotes normally come back within one working day, and there’s a 24/7 line for emergencies.
Which accreditations do you hold?
We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
Are you insured?
Yes, we are fully insured. We also hold CHAS and SafeContractor for clients who vet their contractors.
What’s TR19?
A BESA specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not law, but it’s the benchmark.
How do you know if the ductwork needs cleaning?
Start with the date of the last clean. No record, or a passed date, means it’s due, and grease readings will confirm how urgent it is.
Multi-site and managed buildings
Whether it’s one building or many, the standard is the same: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Records are where multi-site compliance often slips. Each visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.
What a clean won’t put right
To be straight with you, there are a few things this work won’t fix:
- Leaking duct joints that need repair
- Sections that cannot be reached safely without new access (those are recorded, and panels can be fitted)
- Undersized or badly laid-out ducts
If you are not sure, just give us a ring on 0345 646 2711 or use the quote form and we will give you a straight answer before you book.
Parts of the system we cover
- Vertical risers
- Access panels
- Attenuators
- Bends and junctions
- Horizontal duct runs
- Multi-storey ducts
What staff can safely do
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
What we’re called out for in Winford
A greasy duct is a fire path, in Winford as anywhere. Burning grease can carry fire through the ductwork to other rooms or floors, which is why the responsible person needs it under control.
These are the problems we see most often:
- Readings above 200 microns from a grease thickness test
- Thick deposits at the bottom of a vertical duct
- Ductwork that has never been cleaned
- A duct clean needed for an insurer
Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Winford is Arthur Webster Memorial Hospital for Children, about 1.6 miles south-east.
What your quote should include
- When they can work, and whether that’s outside your opening hours
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- What happens if part of the system cannot be accessed
- Whether the quote is based on a survey or pictures
Winford kitchens: local notes
Winford lies within about 2 miles of the sea. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. There are about 12 restaurants, cafés and works canteens and about 4 takeaways in and around Winford, up to about a mile and a half out, according to the Food Standards Agency’s register. Each kitchen that cooks under a canopy sends grease-laden air into a duct, where it cools and settles. Winford is covered by Hampshire and Isle of Wight Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
For schools such as Newchurch Primary School, kitchen extract cleaning is normally booked for the holidays, when the canteen is closed. Where a hall near All Saints' Church, or anywhere in Winford, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Winford is about 5 miles south of Ryde, in the Isle of Wight. Winford gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Our area takes in 125 places across the Isle of Wight, from busy centres to quieter spots. We also work in Portsmouth, around 12 miles away.
Work in PO36 follows the same survey, fixed quote and written report as everywhere else we cover. If you need ductwork cleaning at premises on Chambers Drive, Alverstone Road and Woods Drive or anywhere close by, our technicians can take on the work. We also cover the places around Winford: Branstone (1 mile west), Apse Heath (1 mile south), Princelett (1 mile south-west), Newchurch (1 mile north) and Hale Common (1 mile west). We also work in nearby towns such as Newport (5 miles north-west), Ryde (5 miles north), Cowes (9 miles north-west), Ventnor (4 miles south), East Cowes (8 miles north-west) and Oakfield (5 miles north-east). Island and remote sites take a little more planning, so tell us where you are when you ask for a quote for ductwork cleaning.
Around Winford
Typical jobs here are in premises near The Pointer Inn and Sandown Bay Academy and the streets around them. For rail, the closest station is Lake station, about 1.6 miles east of the centre. Nearby you will also find Arthur Webster Memorial Hospital for Children (1.6 miles south-east) and Wight Aviation Museum (0.8 miles east). Green spaces nearby include Brading Down and Alverstone Mead.
Looking after it afterwards
Once we’ve finished, these simple steps help:
- Don’t switch the extract off early
- Leave a way through to the access panels
- Flag drips from the duct straight away
- Consider fitting panels where the report shows gaps
File the paperwork in the maintenance log. An insurer, fire officer or EHO may ask to see it, and the photos make the duct’s condition easy to see.
Keep to the cleaning interval on the report. A change in cooking hours may change the interval under BESA guidance, and grease thickness testing will show it.