Kent · Ductwork cleaning
Ductwork Cleaning in Horden
Need ductwork cleaning in Horden? We survey first, give you a fixed quote and work around your opening hours, finishing with a written report and photos.
- A grease test showing the duct is overdue
- Ductwork that has never been cleaned
- Gaps where access panels were never fitted
Ductwork cleaning in Horden
The ductwork is where an extract clean is won or lost. Without enough access panels, long stretches can go years without being touched. Each section we can reach is cleaned, and any we can’t is written down, so you know exactly where you stand. If you are dealing with duct runs with no cleaning record and heavy grease at the base of a riser, we can help, from attenuators, access panels and horizontal duct runs onwards.
In a small place like Horden, kitchens are often in older or extended buildings, with long single-storey duct runs, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
The report is your system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Location
- Horden (TN17, TN12)
- Wider area
- Kent
- Reporting
- Certificate and photo report
- Price
- Fixed quote, normally within a working day
- Working hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
What affects the cost of ductwork cleaning
We don’t publish a price list, because sites vary so much. The quote depends on:
- A single visit or a regular plan
- Parking and loading at the site
- Site requirements such as sign-in and permits
- Whether we need access equipment or extra panels
When the work has to happen, how we reach it and how big the site is can all change the price. We take each of them into account, and the price is fixed before any work starts.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- The paperwork from the last visit, if you have it
- Detail shots of panels, filters and grilles
- Any symptoms, from odd noises to smells or leaks
- The site address and the type of premises
There’s no standard price list, because every site is different. Instead, we look at your site first, from photos or a survey, and then send you a fixed quote. To get going, call us on 0345 646 2711, or send details by email.
How the job changes from site to site
Multi-storey and shared buildings
Long ducts in larger buildings can mean several visits. We agree a sequence that suits the building, out of hours where possible.
Attenuators and discharge
Attenuators, where fitted, quieten the extract, but they can hold grease in their linings. They’re cleaned where possible and recorded if not.
Kitchen extracts in Horden
At about 36 miles from central London, Horden sits well inside the area we cover. The visit is fixed around your opening hours, not ours. It’s Tunbridge Wells council that sends environmental health officers to food businesses in Horden. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Our report lists what was cleaned and when, which is useful to have ready.
A hospital like Benenden Hospital, about 5.9 miles south-east, is the kind of site where a kitchen may cook for patients, staff and visitors all day.
Horden is about 6 miles south-east of Paddock Wood, in Kent. Wherever you are in the TN17 postcode area, we cover ductwork cleaning for commercial sites. Across Kent, we cover 922 places, Horden among them. For sites nearby, see our Maidstone page, about 9 miles away.
Every address in TN17 and TN12 is within our area for ductwork cleaning, from busy streets to back roads. That includes premises on Hill Top and Husheath Hill and nearby roads. Close by, we work in Colliers Green (1 mile south), Flishinghurst (2 miles south), Marden Thorn (2 miles north), Knox Bridge (2 miles east) and Cranbrook Common (3 miles east). We also work in nearby towns such as Maidstone (9 miles north), Royal Tunbridge Wells (10 miles west), Tonbridge (11 miles north-west), Kings Hill (10 miles north-west), Foley Park (10 miles north) and Paddock Wood (6 miles north-west).
Local landmarks in Horden
Locally, jobs take us to businesses close to The Gill, among other places. Horden’s nearest station is Marden station, roughly 2.9 miles north. Nearby you’ll also find Sissinghurst Castle (3.6 miles east) and Brattle Farm Museum (2 miles north-east).
Leave it or put it right?
Old grease in a duct for a kitchen in Horden doesn’t stay soft. It bakes into a hard layer that takes far longer to remove, so the later the clean, the bigger the job. In a small place like Horden, a system that fails can take a site out of use.
We don’t list prices on the website, because each job is priced on what it involves. For a fixed quote, call us on 0345 646 2711, or email photos, and we will explain what it covers.
What you get with us
- One contact for all your sites in London and the South East
- Ventilation hygiene specialists since 2009
- A fixed price before any work starts
- Accredited under CHAS and SafeContractor, with ISO 9001
Horden questions
Do you cover smaller places like Horden?
Yes, Horden is part of our area, however small the site. Let us know about access, parking and anything unusual about getting there when you book.
Who enforces fire safety at workplaces in Horden?
Kent Fire and Rescue Service is the fire and rescue service for Horden. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
What do you do with what you remove?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. None of it is left on site.
Do you work with multi-site operators?
Yes. One number covers all your sites across London and the South East, and visits can be set on a regular cycle.
What’s involved in cleaning extract ducts?
After a survey and grease readings, the duct is opened up through its access panels. Each run and riser is scraped and degreased, and test again when we are done.
Which accreditations do you hold?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We have been trading since 2009 and we’re fully insured.
What’s TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t law, but it’s the benchmark.
What happens if you can’t reach some of it?
The report shows them clearly. In ductwork, new access panels are often the answer, which we can install.
Nearby places to Horden
Other services in Horden
What staff can safely do
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and give you a fixed quote.
Aftercare tips
Looking after the system between visits is straightforward, and it helps at the next visit:
- Run the extract fan throughout service
- Diarise the next duct clean
- Keep access panels clear of stored items
- Check readings when the menu changes
A full system clean includes a TR19 certificate from the BESCA Vent Hygiene Elite portal. It records the date, the location and the technician.
Keep the fan on throughout service. Moving air carries vapour through rather than letting it settle, so switching off early adds to the build-up.
What we do, step by step
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool first, and the area around the work is covered and protected. On site, it takes a few hours for a short run, longer for long runs and tall risers. A quick note on how to find the site and where to park makes a visit to Horden run smoothly.
- First the duct route is traced and every access point noted.
- Set points along the runs are tested for grease.
- Through the access panels, thick grease is removed by hand first.
- Horizontal runs and risers are then degreased by the method that suits the deposit.
- Readings and photos are repeated and any section we couldn’t reach is recorded.
Getting ready for the visit
- Tell us the best time to work, such as after service or at a weekend
- Dig out any earlier paperwork for the system
- Mention any locked doors, roof access or ceiling voids
Ask for a quote
Quoting starts with a diagnosis, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work, before any work starts.
Advice
What we’re called out for in Horden
Grease in a duct running from a kitchen in Horden is as much a fire risk as in any building. Once it lights, fire can spread along the duct and into other areas, which is why the responsible person needs it under control.
Signs it’s time to call us include:
- Gaps where access panels were never fitted
- A rancid smell from the extract duct
- An insurer asking for TR19 evidence
- Heavy grease at the base of a riser
Bursars and site managers at schools such as Colliers Green Church of England Primary School tend to book extract cleaning for when the kitchen is empty.
What your quote should include
- Whether the figure could change on the day
- Whether the quote is based on a survey or photos
- Whether a written report and photos are included
- Whether the work can be done while the site is closed