Kent · Ductwork cleaning
Duct cleaning in Etchinghill
Looking for ductwork cleaning in Etchinghill? We diagnose first, fix the price and book the work around your hours, finishing with a written report and photos.
- Years of grease along the duct floor
- An insurer asking for TR19 evidence
- Ductwork that has never been cleaned
How we handle ductwork cleaning in Etchinghill
Duct Doctor has cleaned kitchen extract ductwork since 2009, working across London and the South East. As a BESCA Vent Hygiene Elite member, our duct cleaning is done to BESA TR19® Grease, with each certificate issued through the BESCA portal. If you have duct runs with no cleaning record and grease seeping out of the duct seams, we can put it right.
Work in a small place like Etchinghill starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
The report is your system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Location
- Etchinghill (CT18)
- Region
- Kent
- Reporting
- Certificate and photo report
- Quotes
- A fixed quote up front
- When we work
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Etchinghill: your questions answered
Is Etchinghill within the area you cover?
Yes. Villages and rural sites across the South East are part of our work, Etchinghill included. Just mention lanes, gates or anything else about the site when you book.
Is ductwork cleaning any different in a coastal place like Etchinghill?
Yes, to a degree: at about 3 miles from the coast, Etchinghill gets salt-laden air that corrodes metal faster. Outdoor metalwork near the sea is worth inspecting at every visit.
Can you set up regular visits?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.
Can you look after several sites?
Yes. One number covers all your sites in our area, with visits on a regular schedule.
What should I send you?
Some photos and a quick description of the system plus the address and your hours. We will ask for anything else we need.
What shows that the ducts need a clean?
Start with the date of the last clean. No record, or a passed date, means it’s due, and grease readings will confirm how urgent it is.
What happens to the waste?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. We do not leave it behind.
What happens if you cannot reach some of it?
We record them on the report, with a note of where it is, and we tell you what would make it reachable, for example new access panels.
Ductwork cleaning around Etchinghill
Etchinghill is within about 3 miles of the coast. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. Etchinghill is covered by Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. In Etchinghill, food businesses are inspected by environmental health officers from Folkestone and Hythe council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Our report lists what was cleaned and when, which is useful to have ready.
For schools such as Lyminge Church of England Primary School, kitchen extract cleaning is usually booked for the holidays, when the canteen is closed. If you run catering at a historic house or estate in the area (Acrise Place is about 2.4 miles north-east), event kitchens in older buildings often have awkward duct runs that need planning. Healthcare kitchens, like those at hospitals such as Royal Victoria Hospital (about 3.8 miles south-east), often cook for long hours, which puts them in BESA’s heavier-use bands.
Etchinghill is about 3 miles north of Hythe, in Kent. Etchinghill gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where needed and a written report with photos. Etchinghill is one of 922 towns, villages and districts in Kent where we work for commercial clients. There’s also a page for Maidstone, about 27 miles away.
Every address in CT18 is within our area for ductwork cleaning, from busy streets to back roads. Streets in the area include St Marys Close, Meriden Walk and St Marys Drive, and we cover them all for ductwork cleaning. Other places close to Etchinghill include Lyminge (1 mile north), Postling (1 mile west), Woodland (2 miles north-west), Skeete (2 miles north-west) and Ottinge (2 miles north). Larger places within reach include Ashford (10 miles west), Canterbury (12 miles north), Dover (9 miles east), Folkestone (4 miles south-east), Deal (15 miles north-east) and Hythe (3 miles south).
Around Etchinghill
Around Etchinghill, our work takes us to kitchens and buildings near Brockhill Park Performing Arts College, among other places. The closest station to Etchinghill is Sandling station, roughly 2 miles south-west. Other landmarks nearby include Royal Victoria Hospital (3.8 miles south-east) and Elham Valley Countryside Centre And Railway Museum (1.4 miles south-east). Green spaces nearby include Tolsford Hill.
What affects the cost of ductwork cleaning
Your quote is based on your site. We consider:
- The times the site is available
- Any permits to work or inductions
- The condition of the system
- One-off work versus a regular cycle
Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you are unsure, call 0345 646 2711 or drop us a line and we will give you an honest view and a fixed quote.
Helping us quote
To help us quote quickly, please include:
- Problems your staff have spotted
- Your last certificate, test record or report
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The postcode and the type of business
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before we start.
How the visit works
There are three stages on the day: set-up, the treatment itself and the sign-off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with photos. Most of the time goes on the work itself, which takes from a few hours to more than one visit, depending on duct length and access. Visits to a village like Etchinghill are booked in advance, at a time that suits whoever runs the site.
- We start by working out how the duct runs and where it can be opened.
- Grease readings are taken at set points along the duct.
- Access panels are opened and heavy deposits scraped out by hand.
- Horizontal runs and risers are then degreased by the method that suits the deposit.
- Readings and photos are repeated and any section we couldn’t reach is recorded.
How to prepare
- Make sure someone can let us in and lock up afterwards
- Make sure equipment near the work can be switched off and left to cool
- Tell us where we can park and unload
Getting a quote
Quoting starts with a diagnosis, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before we start.
Read more
What the work involves, part by part
Horizontal duct runs
Flat runs of duct link the canopy to the riser or the outside wall. They collect grease as the air cools and slows, and we clean them section by section through access panels.
Vertical risers
Risers carry the extract up through the building to the roof. Grease collects on the walls and at the foot of the riser, which is one of the points we test.
Landlords, agents and facilities managers
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we are happy to quote for all of it.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we’ll send a fixed quote.
Other services in Etchinghill
What a clean will not put right
To be straight with you, some problems need a different fix:
- Parts of the duct with no way in
- A damper stuck open in the duct
- Undersized or badly laid-out ducts
Not sure which it is? You can call us on 0345 646 2711, or send details by email and we will tell you honestly before you book.
Parts of the system we cover
- Access panels
- Attenuators
- Horizontal duct runs
- Bends and junctions
- Vertical risers
- Multi-storey ducts
Leave it or put it right?
Dealing with the ductwork in Etchinghill now beats dealing with it after a problem. It takes from a few hours to more than one visit, depending on duct length and access, and we work evenings, overnight and weekends. A fault that closes a site in a village like Etchinghill affects everyone who depends on it.
You will not find a price list here, because each job is priced on what it involves. For a fixed quote, give us a ring on 0345 646 2711 or email us, and we’ll talk you through it.
Why us?
- Accredited under CHAS and SafeContractor, with ISO 9001
- A fixed price before any work starts
- Out-of-hours work and a 24/7 emergency line
- Full insurance on every job
See how cleaning jobs are priced and how to check a contractor.
Keeping the system healthy
Think of this as the after-treatment advice, in brief:
- Diarise the next duct clean
- Keep your cleaning records together
- Ask us about extra access panels where sections can’t be reached
- Don’t switch the extract off early
The report gives a recommended next clean date, based on the readings and your daily cooking hours, in line with BESA guidance.
Have access panels fitted where sections can’t be reached. Grease you can reach is grease that gets removed.