Southampton · Ductwork cleaning
Ductwork Cleaning in Eling
Ductwork cleaning in Eling, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- Years of grease along the duct floor
- Heavy grease at the base of a riser
- Grease leaking from duct joints
What your team can do, and what needs us
Staff cleaning does not replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Ductwork cleaning in Eling
No two duct runs are the same, in Eling or anywhere else. A few metres to an outside wall, or a riser up through the building to a roof fan. The survey traces the route and finds every access point before we quote. Common call-outs are for gaps where access panels were never fitted and duct runs with no cleaning record, across vertical risers, multi-storey ducts and horizontal duct runs.
Around a smaller place like Eling, kitchen extracts tend to belong to pubs, cafés, takeaways and school or care home kitchens. A kitchen that cooks fewer hours still builds up grease, so cleaning is planned around how much it cooks and what the readings show.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Place
- Eling (SO40, SO15)
- Wider area
- Southampton
- Reporting
- Certificate and photo report
- Quotes
- A fixed price before work begins
- Hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
When to call us in Eling
The further the air travels from the cooking, the cooler it gets. As it cools, the grease it carries condenses onto the duct walls, which is why ducts go on gathering grease well beyond the filters.
If you notice any of these, it’s worth a diagnosis:
- Fat dripping from the ductwork
- Heavy grease at the base of a riser
- Sections of duct with no access panels
- An insurer asking for TR19 evidence
If you run catering at a healthcare site, such as a hospital like Western Community Hospital about 1.9 miles north-east, the extract may need cleaning more often than a part-time kitchen.
What your quote should include
- Whether the figure could change on the day
- Whether they’re fully insured
- How areas they can’t reach will be recorded
- How they set the interval to the next visit
Ductwork cleaning in Eling: the local picture
Eling lies within about 1 mile of the sea. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. Look up Eling on the FSA’s food hygiene register and you’ll find about 31 restaurants, cafés and works canteens and about 27 takeaways and sandwich shops within roughly a mile and a half of the centre of Eling. Each kitchen that cooks under a canopy sends grease-laden air into a duct, where it cools and settles. Eling sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Commuter trade near Totton station can mean long cooking hours, and long hours put a kitchen into BESA’s more frequent cleaning bands. If you look after a school kitchen, at a school such as Eling Infant School and Nursery or anywhere near Eling, the holidays are the usual time for a TR19® clean.
Eling is about 1 mile south-east of Totton, in Southampton. Every kind of commercial site in Eling, ductwork cleaning is something we can help with. We can work out of hours so the site keeps running. Eling is one of 40 towns, villages and districts in Southampton we cover for commercial clients.
Every address in SO40 and SO15 is covered for ductwork cleaning, from the main roads to the quietest streets. That includes premises on Bury Lane, Rose Road and Mill Road and nearby roads. Eling is on the A35, so it’s easy for us to get to for out-of-hours visits. If your site is just outside Eling, we cover Redbridge (1 mile north-east), Millbrook (2 miles east), Hillyfields (2 miles north-east), Maybush (2 miles north-east) and Regents Park (2 miles east). Further out, we also cover Southampton (4 miles east), Townhill Park (6 miles east), Midanbury (5 miles east), Thornhill (6 miles east), Chartwell Green (6 miles east) and Harefield (6 miles east).
Landmarks near Eling
Locally, jobs take us to businesses close to The Anchor pub and Hounsdown School, among other places. There’s a railway station in Eling itself: Totton station. A little further out are Eling Experience (0.6 miles north) and Westquay (3.5 miles east). Open spaces near Eling include Testwood Lakes.
Nearby places to Eling
What else we do in Eling
What ductwork cleaning cannot fix
We won’t sell you work that does not address the problem, so here are the limits:
- A duct that’s too small or badly routed for the kitchen (a design issue)
- Faulty fire dampers
- A worn-out fan that needs replacing
If you’re not sure, just ring 0345 646 2711 or email us and we will give you a straight answer.
Parts of the system we cover
- Multi-storey ducts
- Vertical risers
- Access panels
- Attenuators
- Horizontal duct runs
- Bends and junctions
Keeping the system healthy
No system stays clean for ever, but care slows the build-up. Our tips:
- Never cook with a filter missing
- Keep access panels clear of stored items
- Consider fitting panels where the report shows gaps
- Ask for a grease thickness test if the kitchen gets busier
After the clean, the same points are tested again, so the report shows the before and after figures. Before and after photos sit next to the numbers.
Watch for warning signs between cleans: drips from the ductwork, stale smells or a noisy fan. Testing will show whether any section has reached 500 microns.
Questions from Eling
Does the sea air around Eling make a difference to ductwork cleaning?
Yes, to a degree: at about 1 mile from the coast, Eling gets salt-laden air that corrodes metal faster. Corroded fixings and housings are noted on the report so they can be dealt with.
Is Eling within the area you cover?
Yes, we work in villages as well as towns, and Eling is covered. The journey is planned ahead, so a few details about the route help.
What should I send you?
The site address, the type of premises and your opening hours, along with a few pictures and any previous report.
Where does the waste go?
Anything we remove is contained as we work and taken away with us, including grease, debris and dirty water. None of it is left on site.
What’s the cleaning interval for extract ductwork?
At least as often as BESA guidance sets for your cooking hours. Heavy use of 12 to 16 hours a day means at least every 3 months, while lighter use can go longer.
What do you do to protect the area?
By covering it before any work starts. We keep the work contained and clean down when we finish.
How is kitchen extract ductwork cleaned?
Through access panels along the duct. Heavy grease is scraped out by hand, then the surfaces are degreased with a method that suits the deposit, such as degreasers, hot water or steam.
Can extra access doors be added to the duct?
Yes, we do. The survey or clean shows where sections couldn’t be reached, and fitting them means future cleans are more complete.
What the work involves, part by part
Attenuators and discharge
Some systems have attenuators to reduce noise, but they can hold grease in their linings. We clean what can be reached and note anything that cannot.
Horizontal duct runs
Horizontal runs carry the extract along ceilings and through voids. They collect grease as the air cools and slows, and we clean them section by section through access panels.
How we price ductwork cleaning
The quote reflects the site in front of us. We take into account:
- Site rules, permits and inductions
- Whether several sites go on one quote
- The condition we find in the survey
- Where the site is and how we reach it
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. You will have a fixed price before we start.
What to send for a quote
What to send for a quote:
- When the site is open and when it’s quiet
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Any access panels or hatches you can see
- Your last certificate, test record or report
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.
The process
Your staff do not need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Before we leave, the area is tidied and the paperwork follows. Your opening hours decide when we come to Eling, not ours.
- First the duct route is traced and every access point noted.
- We measure grease thickness at set points before cleaning.
- We open the panels and scrape out the heaviest grease.
- The duct is degreased with the method that suits the grease, from degreasers to hot water or steam.
- Post-clean readings and photos go into the report, with any unreachable section listed.
How to prepare
- Allow time for equipment near the work to be turned off and cool down
- Dig out any earlier paperwork for the system
- Arrange a key holder or contact on site
Getting a quote
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before we start.